Boriding of mild steel using the spark plasma sintering (SPS) technique

被引：0
|
作者：
Yu, LG
Khor, KA
Sundararajan, G
机构：
[1] Nanyang Technol Univ, Sch Mech & Prod Engn, Singapore 639798, Singapore
[2] Int Adv Res Ctr Powder Met & New Mat, ARCI, Hyderabad 500005, Andhra Pradesh, India
来源：
SURFACE & COATINGS TECHNOLOGY | 2002年 / 157卷 / 2-3期
关键词：
spark plasma sintering; boriding; kinetics; mild steel; iron boride;
D O I：
10.1016/S0257-8972(02)00134-2
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The spark plasma sintering (SPS) technique was employed to perform boriding of mild steel. A pack boriding method that contained a silicon carbide-boron carbide powder pack mixture was utilized in this study. The process was performed in the temperature range 700-1000 degreesC for 30 min. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) revealed the microstructure and phase composition of the iron boride layers (FeB and Fe2B). Plotting InD vs. 1/T expresses concisely the boride layer's growth rate constant (D) vs. temperature (T) relation. A linear relationship between InD and I/T is confirmed. The kinetics of SPS boronization are discussed, and the effect of SPS on boronization is studied. The results confirmed that SPS required significantly lower activation energy for accomplishing the boriding operation. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：226 / 230
页数：5
相关论文
共 50 条
  • [41] Progress of Spark Plasma Sintering (SPS) Method, Systems, Ceramics Applications and Industrialization
    Tokita, Masao
    CERAMICS-SWITZERLAND, 2021, 4 (02): : 160 - 198
  • [42] Oxidation resistant aluminized MCrAlY coating prepared by spark plasma sintering (SPS)
    Oquab, Diar
    Estournes, Claucle
    Monceau, Daniel
    ADVANCED ENGINEERING MATERIALS, 2007, 9 (05) : 413 - 417
  • [43] Spark-Plasma-Sintering (SPS) of tungsten carbide and titanium carbonitride nanopowders
    Zalite, I.
    Angerer, P.
    Yu, L. G.
    Khor, K. A.
    ANNUAL CONFERENCE ON FUNCTIONAL MATERIALS AND NANOTECHNOLOGIES - FM&NT 2011, 2011, 23
  • [44] Microstructure and mechanical properties of silicon carbide processed by Spark Plasma Sintering (SPS)
    Hayun, S.
    Paris, V.
    Mitrani, R.
    Kalabukhov, S.
    Dariel, M. P.
    Zaretsky, E.
    Frage, N.
    CERAMICS INTERNATIONAL, 2012, 38 (08) : 6335 - 6340
  • [45] Spark-plasma-sintering (SPS) of nanostructured and submicron titanium oxide powders
    Angerer, P
    Yu, LG
    Khor, KA
    Krumpel, G
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 381 (1-2): : 16 - 19
  • [46] Glass-Ceramics Processed by Spark Plasma Sintering (SPS) for Optical Applications
    Singarapu, Babu
    Galusek, Dusan
    Duran, Alicia
    Pascual, Maria Jesus
    APPLIED SCIENCES-BASEL, 2020, 10 (08):
  • [47] Al-SiC COMPOSITES SYNTHESIZED BY THE SPARK PLASMA SINTERING METHOD (SPS)
    Garbiec, Dariusz
    Jurczyk, Mieczyslaw
    COMPOSITES THEORY AND PRACTICE, 2013, 13 (04): : 255 - 259
  • [48] Densification of uranium dioxide fuel pellets prepared by spark plasma sintering (SPS)
    Ge, Lihao
    Subhash, Ghatu
    Baney, Ronald H.
    Tulenko, James S.
    McKenna, Edward
    JOURNAL OF NUCLEAR MATERIALS, 2013, 435 (1-3) : 1 - 9
  • [49] Reactive spark plasma sintering (SPS) of nitride reinforced titanium alloy composites
    Banerjee, Rajarshi, 1600, Elsevier Ltd (617):
  • [50] Composites based on ZrO2-CaAl4O7 using conventional sintering and spark plasma sintering (SPS)
    Bruni, Y. L.
    Suarez, G.
    Sakka, Y.
    Garrido, L. B.
    Aglietti, E. F.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2016, 17 (04): : 380 - 388
12345