Experimental and Numerical Determination of Stress Intensity Factors of Crack in Plate with a Multiple Holes

被引：0
|
作者：
Belamri, S. [1 ]
Tamine, T. [2 ]
Nemdili, A. [3 ]
机构：
[1] Direct Reg Ouest, ARCELOR MITTAL, 02 Rue Mekki Khalifa, Oran 31000, Algeria
[2] Univ Sci Technol Oran Algerie, Fac Genie Mecan, Lab LCGE, Oran 31000, Algeria
[3] Fac Genie Civil & Architecture, Lab LRTTFC, Oran 31000, Algeria
来源：
DAMAGE AND FRACTURE MECHANICS: FAILURE ANALYSIS OF ENGINEERING MATERIALS AND STRUCTURES | 2009年
关键词：
Photoelasticity; Fringe; Crack; Stress Field; Stress Intensity Factor; FRANC; 2D;
D O I：
10.1007/978-90-481-2669-9_30
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The optical method of photoelasticity was used to measure Stress field and stress intensity factors of crack with the presence of holes in a polycarbonate PSM-1 birefringeant plates under tension. Tests were used for variable numbers and dimensions of holes. The present study takes into account the several positions of holes and crack in plates. Stress intensity factor has been determined from die crack tip fringe pattern by multiple points' technic. Experimental results have been confirmed with a good agreement numerical estimation of stress intensity factors obtained with the finite element method (FRANC 2D).
引用
收藏
页码：285 / +
页数：2
相关论文
共 50 条
  • [41] Mode I Stress Intensity Factors for triangular corner crack nearby intersecting of cylindrical holes
    Fattori di intensificazione delle tensioni per cricche ad angolo triangolari in corrispondenza di intersezione di fori sollecitate a modo I
    2013, Gruppo Italiano Frattura (26):
  • [42] Experimental determination of stress intensity factors due to residual stresses
    Schindler, HJ
    Cheng, W
    Finnie, I
    EXPERIMENTAL MECHANICS, 1997, 37 (03) : 272 - 277
  • [43] Experimental determination of stress intensity factors due to residual stresses
    H. -J. Schindler
    W. Cheng
    I. Finnie
    Experimental Mechanics, 1997, 37 : 272 - 277
  • [44] Numerical analysis for the determination of the stress intensity factors and crack opening displacements in plates repaired with single and double composite patches
    Madani, K.
    Touzain, S.
    Feaugas, X.
    Benguediab, M.
    Ratwani, M.
    COMPUTATIONAL MATERIALS SCIENCE, 2008, 42 (03) : 385 - 393
  • [45] STRESS AROUND A CRACK IN AN ELASTIC PLATE WEAKENED BY 2 HOLES
    KORNIETS, SD
    KAMINSKII, AA
    SOVIET APPLIED MECHANICS, 1987, 23 (11): : 1072 - 1077
  • [46] Stress around a crack in an elastic plate weakened by two holes
    Korniets, S.D.
    Soviet applied mechanics, 1988, 23 (11): : 1072 - 1077
  • [47] REMARKS ON AN EXISTING NUMERICAL METHOD TO ESTIMATE STRESS INTENSITY FACTOR OF A STRAIGHT CRACK IN A FINITE PLATE
    VOOREN, JVD
    JOURNAL OF BASIC ENGINEERING, 1967, 89 (01): : 236 - &
  • [48] DETERMINATION OF THE STRESS INTENSITY FACTORS FOR AXISYMMETRIC CYLINDRICAL INTERFACE CRACK BY AN EIGENVALUE METHOD
    Weng, Lin
    Gao, Zengliang
    Wang, Xiaogui
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 6, PTS A AND B, 2010, : 191 - 195
  • [49] STRESS INTENSITY FACTORS FOR AN EDGE CRACK INTERACTING WITH AN EMBEDDED PARALLEL CRACK FOR A FINITE PLATE UNDER PURE BENDING
    Ma, Qin
    Perl, Mordechai
    Levy, Cesar
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 1, 2019,
  • [50] Calculation of Stress Intensity Factors for a Multiple Crack-Hole Interaction Problem
    Khawaja, Asif, I
    Binienda, Wieslaw K.
    EARTH AND SPACE 2024: ENGINEERING FOR EXTREME ENVIRONMENTS, 2024, : 416 - 429
12345