Simulation of reactive mixing behaviors inside micro-droplets by a lattice Boltzmann method

被引:28
|
作者
Fu, Yuhang [1 ]
Bai, Lin [1 ]
Zhao, Shufang [2 ]
Zhang, Xiong [1 ]
Jin, Yong [1 ]
Cheng, Yi [1 ]
机构
[1] Tsinghua Univ, Dept Chem Engn, Beijing 100084, Peoples R China
[2] Novozymes China Investment Co Ltd, China Headquarters, Beijing 100085, Peoples R China
关键词
Droplet-based microfluidics; Mixing intensification; Parallel competing reactions; Lattice Boltzmann method; IODATE REACTION SYSTEM; MICROMIXING EFFICIENCY; FLOW; MICROFLUIDICS; MICROCHANNELS; CHANNELS;
D O I
10.1016/j.ces.2018.02.010
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The Villermaux/Dushman competing parallel reactions are modeled into a multiphase/multicomponent lattice Boltzmann method (LBM) to theoretically investigate the interplay between mixing and reactions in droplet-based microfluidics. To quantify the mixing and reaction efficiency inside the droplets, the standard deviation sigma representing the pure mixing performance without reaction and the segregation index Xs reflecting mixing index with simultaneous chemical reactions are calculated based on the simulation results. The results show that the species transport can be evidently intensified by matching the flow recirculation and the appropriate initial distribution of reactants. We further demonstrate that the reaction selectivity could be improved by tuning droplet flow conditions or adding internal baffles to arbitrarily adjust the position of recirculation inside droplet. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:79 / 89
页数:11
相关论文
共 50 条
  • [21] Lattice boltzmann method simulation of fluid flow inside continuous slab casting mold
    Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China
    Jixie Gongcheng Xuebao, 2006, 9 (154-159):
  • [22] Simulation of Droplet Resting on Micro-structured Surface by Lattice Boltzmann Method
    Ju, Yu-Tang
    Kuo, Feng-Chun
    Lin, Yi-Ting
    Lin, Chao-An
    37TH NATIONAL CONFERENCE ON THEORETICAL AND APPLIED MECHANICS (37TH NCTAM 2013) & THE 1ST INTERNATIONAL CONFERENCE ON MECHANICS (1ST ICM), 2014, 79 : 133 - 136
  • [23] Lattice Boltzmann method in simulation of thermal micro-flow with temperature jump
    Tian, Zhi-Wei
    Zou, Chun
    Liu, Zhao-Hui
    Guo, Zhao-Li
    Liu, Hong-Juan
    Zheng, Chu-Guang
    INTERNATIONAL JOURNAL OF MODERN PHYSICS C, 2006, 17 (05): : 603 - 614
  • [24] Simulation of micro aggregate breakage in turbulent flows by the cumulant lattice Boltzmann method
    Far, Ehsan Kian
    Geier, Martin
    Kutscher, Konstantin
    Krafczyk, Manfred
    COMPUTERS & FLUIDS, 2016, 140 : 222 - 231
  • [25] Numerical simulation of advancing interface in a micro heterogeneous channel by the lattice Boltzmann method
    Kobayashi, K
    Inamuro, T
    Ogino, F
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2006, 39 (03) : 257 - 266
  • [26] Numerical simulation of sound generation in a mixing layer by the finite difference lattice Boltzmann method
    Hiraishi, Masayuki
    Tsutahara, Michihisa
    Leung, R. C. K.
    COMPUTERS & MATHEMATICS WITH APPLICATIONS, 2010, 59 (07) : 2403 - 2410
  • [27] A lattice-Boltzmann method simulation of the horizontal offset in oblique column deposition of aluminum droplets
    Ren Y.
    Liu Z.
    Pang Y.
    Wang X.
    Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics, 2021, 53 (06): : 1599 - 1608
  • [28] Numerical investigation of mixing efficiency in Janus micro-mixer using lattice Boltzmann method
    Liu, Zhaomiao
    Shi, Kai
    Cai, Fanming
    Ren, Yanlin
    Physics of Fluids, 2023, 35 (07):
  • [29] Numerical study of mixing behavior with chemical reactions in micro-channels by a lattice Boltzmann method
    Wang, Wentan
    Zhao, Shufang
    Shao, Ting
    Zhang, Mengxue
    Jin, Yong
    Cheng, Yi
    CHEMICAL ENGINEERING SCIENCE, 2012, 84 : 148 - 154
  • [30] Optimization of Passive Mixer for Enhanced Mixing in a Micro-channel by Using Lattice Boltzmann Method
    Yoon, Joon-Yong
    Han, Gyu-suk
    Byun, Sung-Joon
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2005, 29 (05) : 707 - 715