Hardening of coatings based on chromium steel alloyed with a complex of boride compounds by quenching

被引：0

作者：

Eremin, E. N. ^{[1
]}

Losev, A. S. ^{[1
]}

Borodikhin, S. A. ^{[1
]}

Ponomarev, I. A. ^{[1
]}

Matalasova, A. E. ^{[1
]}

机构：

[1] Omsk State Tech Univ, 11,Mira Ave, Omsk 644050, Russia

来源：

XII INTERNATIONAL SCIENTIFIC AND TECHNICAL CONFERENCE APPLIED MECHANICS AND SYSTEMS DYNAMICS | 2019年 / 1210卷

基金：

俄罗斯科学基金会;

关键词：

STAINLESS-STEELS; PRECIPITATION;

D O I：

10.1088/1742-6596/1210/1/012040

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This article explores the effect of quenching regimes on the structure and characteristics of a metal deposited by a high-chromium flux-cored wire of a martensitic class with carbide-boride-nitride doping. We established that quenching from a temperature of 1020 degrees C provides a hardness in the range of 54-58 HRC. It is shown that the hardening is caused by the formation of a martensitic structure, an eutectic composition based on chromium and iron borides, carboboride, carbide and nitride particles for the most part of chromium and titanium with increased microhardness. The hardness of such a metal practically coincides with the hardness of the metal after surfacing.

引用

页数：8

共 47 条

[31] Influence of uniaxial deformation on surface morphology and corrosion performance of chromium-based coatings for packaging steel
Whiteside, Jordan
de Vooys, Arnoud C. A.
Sackett, Elizabeth
McMurray, Hamilton N.
CORROSION SCIENCE, 2021, 190
[32] Investigation of Hardening Processes of Corrosion-Resistant Coatings Deposited by a Flux-Cored Wire Alloyed with BN-TiB2-ZrB2 Complex
Eremin, E. N.
Losev, A. S.
Borodikhin, S. A.
Matalasova, A. E.
Ponomarev, I. A.
OIL AND GAS ENGINEERING (OGE-2018), 2018, 2007
[33] Protective conversion coatings based on rare-earth compounds for passivation of galvanized steel
Abrashov, A. A.
Sundukova, A. V.
Grigoryan, N. S.
Asnis, N. A.
Khazanov, N. A.
Chudnova, T. A.
Zheludkova, E. A.
INTERNATIONAL JOURNAL OF CORROSION AND SCALE INHIBITION, 2022, 11 (04): : 1749 - 1762
[34] Synthesis of a cobalt-based photoluminescent coordination complex to study quenching mechanisms of nitro compounds
Mansab, Saira
Rafique, Uzaira
Akhtar, Muhammad Javed
JOURNAL OF COORDINATION CHEMISTRY, 2018, 71 (15) : 2358 - 2372
[35] Experimental characterization and modeling of complex anisotropic hardening in quenching and partitioning (Q&P) steel subject to biaxial non-proportional loadings
Hou, Yong
Lee, Myoung-Gyu
Lin, Jianping
Min, Junying
INTERNATIONAL JOURNAL OF PLASTICITY, 2022, 156
[36] Wear resistance of KhVG tool steel hardened with composite coatings based on titanium-chromium double carbide
A. P. Umanskii
V. P. Konoval
I. A. Podchernyaeva
A. D. Panasyuk
Ya. N. Gladkii
O. N. Makovkin
Journal of Superhard Materials, 2007, 29 (4) : 250 - 255
[37] Sulfidation of Ceramic-Based Coatings Deposited on Low-Alloyed Steel 16Mo3 Exposed at High Temperature
Rzad, Ewa
Dudziak, Tomasz
Polczyk, Tomasz
Boron, Lukasz
Figiel, Pawel
Ozieblo, Artur
Chmielewska, Danuta
Synowiec, Barbara
Pichniarczyk, Pawel
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (11) : 8538 - 8550
[38] Sulfidation of Ceramic-Based Coatings Deposited on Low-Alloyed Steel 16Mo3 Exposed at High Temperature
Ewa Rząd
Tomasz Dudziak
Tomasz Polczyk
Łukasz Boroń
Paweł Figiel
Artur Oziębło
Danuta Chmielewska
Barbara Synowiec
Paweł Pichniarczyk
Journal of Materials Engineering and Performance, 2021, 30 : 8538 - 8550
[39] Determination of Optimal Compositions of Cast Nickel-Chromium-Based Alloys with Complex Alloying and Solid-Solution Hardening for Prosthetic Dentistry
Ivanchenko, V. G.
Oshkadyorov, S. P.
Severina, S. M.
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2012, 34 (08): : 1133 - 1143
[40] Electrodeposition of corrosion-resistant Cr–P and Cr–P–W coatings from solutions based on compounds of trivalent chromium
V. V. Kuznetsov
E. G. Vinokurov
A. V. Telezhkina
E. A. Filatova
Journal of Solid State Electrochemistry, 2019, 23 : 2367 - 2376

← 1 2 3 4 5 →