The mathematical modeling of the compressive stresses on the cutting tool in machining of Inconel 718

被引：0
|
作者：
Seker, Ulvi [1 ]
Kurt, Abdullah [1 ]
机构：
[1] Gazi Univ, Tech Educ Fac, TR-06500 Ankara, Turkey
来源：
ADVANCES IN MATERIALS PROCESSING TECHNOLOGIE | 2006年 / 526卷
关键词：
Inconel; 718; cutting tool stress; compressive; stress; Ansys; mathematical modeling;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, a mathematical model has been developed for the cutting tool stresses in machining of nickel-based super alloy Inconel 718 used in aircraft and spacecraft industries, nuclear power systems and steam generators etc. necessitating oxidation and corrosion resistance, high temperature and strength. The cutting forces were measured by a series of experimental measurements and stress distributions on the cutting tool were analyzed by means of the finite element method using Ansys software. The mathematical modeling process of the compressive stresses in x, y and z directions was carried out with multiple regression analysis regarding to Ansys stress results depending on the cutting forces and the chip-tool contact area. It is found that model results had good agreement with the Ansys stress results.
引用
收藏
页码：229 / 234
页数：6
相关论文
共 50 条
  • [41] Optimization of Plasma Arc Cutting Parameters on Machining of Inconel 718 Superalloy
    Karthick, M.
    Anand, P.
    Meikandan, M.
    Sekar, S.
    Natrayan, L.
    Bobe, Ketema
    JOURNAL OF NANOMATERIALS, 2022, 2022
  • [42] The effects of cutting conditions on surface integrity in machining Inconel 718 alloy
    Umbrello, Domenico
    CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 2093 - 2100
  • [43] Study on wear mechanism of carbide tool in machining Inconel 718
    Fan, Yihang
    Zhou, Liang
    Song, Shuangzhu
    Sun, Fenglian
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII, 2014, 589-590 : 323 - +
  • [44] Influence of cutting tool material on machinability of Inconel 718 superalloy
    Jadam, Thrinadh
    Datta, Saurav
    Masanta, Manoj
    MACHINING SCIENCE AND TECHNOLOGY, 2021, 25 (03) : 349 - 397
  • [45] The effect of cutting force and tool wear in milling INCONEL 718
    Kamdani, K.
    Ashaary, I
    Hassan, S.
    Lajis, M. A.
    INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME2018), 2019, 1150
  • [46] Effect of cutting speed on the carbide cutting tool in milling Inconel 718 alloy
    Hadi, Musfirah Abdul
    Ghani, Jaharah A.
    Haron, Che Hassan Che
    Kasim, Mohd. Shahir
    JOURNAL OF MATERIALS RESEARCH, 2016, 31 (13) : 1885 - 1892
  • [47] MQL cutting of Inconel 718 with a super lattice coating tool
    Obikawa, T
    Kamata, Y
    ADVANCES IN ABRASIVE TECHNOLOGY VIII, 2005, 291-292 : 433 - 438
  • [48] Influence of Cutting Tool and Drilling Process on the Machinability of Inconel 718
    Ma, L. J.
    Yu, H.
    Mao, X. H.
    Li, C. R.
    Feng, C. Y.
    Li, F. N.
    MANUFACTURING TECHNOLOGY, 2023, 23 (02): : 204 - 215
  • [49] Effect of cutting speed on the carbide cutting tool in milling Inconel 718 alloy
    Musfirah Abdul Hadi
    Jaharah A. Ghani
    Che Hassan Che Haron
    Mohd. Shahir Kasim
    Journal of Materials Research, 2016, 31 : 1885 - 1892
  • [50] Water Vapour assisted machining of Inconel 718 incorporating through-tool cutting fluid delivery approach
    Kadam, Ganesh S.
    Pawade, Raju S.
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (10): : 7317 - 7331
12345