Microlens Array Fabricated by Gray-scale Lithography Maskless System

被引:2
|
作者
Cirino, G. A. [1 ]
Lopera, S. A. [2 ]
Montagnoli, A. N. [1 ]
Mansano, R. D. [2 ]
Neto, L. G. [3 ]
机构
[1] Univ Fed Sao Carlos, CCET, BR-13560 Sao Carlos, SP, Brazil
[2] Univ Sao Paulo, LSI PSI, Sao Paulo, Brazil
[3] Univ Sao Paulo, EESC, Sao Paulo, Brazil
基金
巴西圣保罗研究基金会;
关键词
SOL-GEL GLASS; DESIGN;
D O I
10.1149/04901.0339ecst
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
This work presents the fabrication of a high fill factor Fresnel microlens array (MLA) by employing a low-cost home-built maskless exposure lithographic system. A phase relief structure was generated on a photoresist-coated silicon wafer, replicated in Polydimethylsiloxane (PDMS) and electrostatically bonded to a glass substrate. Optical characterization was based on the evaluation of the maximum intensity of each spot generated at the MLA focal plane as well as its full width at half maximum (FWHM) intensity values. The resulting FWHM and maximum intensity spot mean values were 50 +/- 8% mu m and 0.71 +/- 7% a.u, respectively. Such a MLA can be applied as Shack-Hartmann wavefront sensors, in optical interconnects and to enhance the efficiency of detector arrays.
引用
收藏
页码:339 / 345
页数:7
相关论文
共 50 条
  • [31] Microlens array fabricated by excimer laser micromachining with gray-tone photolithography
    Tien, CH
    Chien, YE
    Chiu, Y
    Shieh, HPD
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 2003, 42 (03): : 1280 - 1283
  • [32] Fabrication of arrays of microlenses with controlled profiles using gray-scale microlens projection photolithography
    Wu, MH
    Park, C
    Whitesides, GM
    LANGMUIR, 2002, 18 (24) : 9312 - 9318
  • [33] Fabrication of long hexagonal micro-lens array by applying gray-scale lithography in micro-replication process
    Yang, Jauh-Jung
    Liao, Yunn-Shiuan
    Chen, Chi-Feng
    OPTICS COMMUNICATIONS, 2007, 270 (02) : 433 - 440
  • [34] GRAY-SCALE ALIAS
    BOCK, P
    KLINNERT, R
    KOBER, R
    ROVNER, RM
    SCHMIDT, H
    IEEE TRANSACTIONS ON KNOWLEDGE AND DATA ENGINEERING, 1992, 4 (02) : 109 - 122
  • [35] GRAY-SCALE HOUGH TRANSFORM FOR THICK LINE DETECTION IN GRAY-SCALE IMAGES
    LOT, RC
    TSAI, WH
    PATTERN RECOGNITION, 1995, 28 (05) : 647 - 661
  • [36] Development of Microlens Array (MLA) for Maskless Photolithography Application
    Nam, Minwoo
    Oh, Haekwan
    Kim, Geunyoung
    Yang, Sangsik
    Lee, Keekeun
    RELIABILITY, PACKAGING, TESTING, AND CHARACTERIZATION OF MEMS/MOEMS AND NANODEVICES IX, 2010, 7592
  • [37] Fabrication of 3D surface structures using gray-scale lithography
    Stilson, Christopher
    Pal, Rajan
    Coutu, Ronald, Jr.
    MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY XIX, 2014, 8973
  • [38] Blazed grating fabrication through gray-scale X-ray lithography
    Mouroulis, P
    Hartley, FT
    Wilson, DW
    White, VE
    Shori, A
    Nguyen, S
    Zhang, M
    Feldman, M
    OPTICS EXPRESS, 2003, 11 (03): : 270 - 281
  • [39] A Microlens Array with Different Focal Lengths Fabricated by Roll-To-Roll UV Lithography
    Ye, Huichun
    Shen, Lianguan
    Li, Mujun
    Li, Likai
    POLYMERS & POLYMER COMPOSITES, 2018, 26 (02): : 155 - 159
  • [40] Gray-scale mask technique for microlens device of integrated near-field optical head
    Zhang, Xin-Yu
    Pei, Xian-Deng
    Xie, Chang-Sheng
    Guangxue Jishu/Optical Technique, 2002, 28 (04): : 291 - 292