Performance optimization and investigation of flow phenomena on tidal turbine blade airfoil considering cavitation and roughness

被引:25
|
作者
Sun, ZhaoCheng [1 ]
Mao, YuFeng [1 ]
Fan, MengHao [2 ]
机构
[1] Shandong Acad Sci, Inst Oceang Instrumentat, Qingdao 266001, Shandong, Peoples R China
[2] China Univ Petr East China, Coll Mech & Elect Engn, Qingdao 266580, Peoples R China
关键词
Tidal current turbine; Airfoil; Multi-objective optimization; Cavitation; Roughness; LEADING-EDGE ROUGHNESS; AERODYNAMIC PERFORMANCE; SHAPE OPTIMIZATION; DESIGN; TRANSITION; BUBBLE;
D O I
10.1016/j.apor.2020.102463
中图分类号
P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
Since the underwater impurity and cavitation could have a significant impact on the aerodynamic performance of tidal turbine blade airfoil, it is necessary to consider both roughness and cavitation in the process of optimization design. In the present study, a novel multi-objective evolution algorithm based on NSGA-II is proposed for the design of tidal turbine blade airfoil, to overcome the adverse effects of cavitation and roughness. Nonuniform rational B-spline (NURBS) representation is adopted in the process of optimization; a new performance evaluation index of airfoil under rough condition is formed; multi-objective optimization was conducted for NACA2415 airfoil. The minimum pressure coefficient is the criterion used for the identification of cavitation on tidal turbine blade airfoil. The CFD and XFOIL are employed to calculate the lift drag coefficient and pressure coefficient of airfoil. The transition position of airfoil is predicted by the improved transition model. A comprehensive experimental study was conducted to evaluate the aerodynamic performance of optimized airfoil, revealing flow patterns such as flow separation over the initial airfoil and optimized airfoil through smoke flow experiment. In order to simulate the rough condition, sandpaper was pasted on the leading edge surface of airfoil and experiments indicated that location and formation of laminar separation bubble were affected . Numerical simulation and experimental results show that the optimized airfoil enjoys a better aerodynamic performance than the original ones under the roughness condition, in terms of cavitation inhibition. Within the range of design conditions, the lift drag ratio of optimized airfoils increased by an average of 20% and the minimum pressure coefficient peak decreased by about 17.2% on average. Thus,the proposed method can effectively guide the design and technical reserve of the tidal turbine.
引用
收藏
页数:17
相关论文
共 50 条
  • [21] An Experimental Study of Airfoil and Endwall Heat Transfer on a Linear Turbine Blade Cascade - Secondary Flow and Surface Roughness Effects
    Lorenz, Marco
    Schulz, Achmed
    Bauer, Hans-Joerg
    HEAT TRANSFER RESEARCH, 2010, 41 (08) : 867 - 887
  • [22] The Blade Design of a Bionic Shark Fin Airfoil for a Horizontal Axis Tidal Current Turbine
    Zhang, Kaisheng
    Yang, Shihao
    Gao, Zhen
    Zhang, Baocheng
    JOURNAL OF ENERGY ENGINEERING, 2021, 147 (06)
  • [23] THE INFLUENCE OF TIDAL UNSTEADINESS ON A TIDAL TURBINE BLADE FLOW-INDUCED VIBRATION
    Arini, Nu Rhahida
    Turnock, Stephen R.
    Tan, Mingyi
    PROCEEDINGS OF THE ASME 38TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2019, VOL 10, 2019,
  • [24] Effects of Surface Roughness on Aerodynamic Performance of a Wind Turbine Airfoil
    Li, Deshun
    Li, Rennian
    Yang, Congxin
    Wang, Xiuyong
    2010 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), 2010,
  • [25] DIRECT NUMERICAL SIMULATIONS OF AERODYNAMIC PERFORMANCE OF WIND TURBINE AIRFOIL BY CONSIDERING FLAP-WISE BLADE OSCILLATIONS
    Toosi, Mahdi Erfanian Nakhchi
    Rahmati, Mohammad
    PROCEEDINGS OF ASME TURBO EXPO 2022: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2022, VOL 11, 2022,
  • [26] Anti-flutter optimization design of airfoil for wind turbine blade
    Gao, Qiang
    Cai, Xin
    Meng, Rui
    Zhu, Jie
    JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2018, 10 (01)
  • [27] Geometry Design Optimization of a Wind Turbine Blade Considering Effects on Aerodynamic Performance by Linearization
    Yang, Kyoungboo
    ENERGIES, 2020, 13 (09)
  • [28] Influence of Airfoil Curvature and Blade Angle on Vertical Axis Hydraulic Turbine Performance in Low Flow Conditions
    Shen, Chunyun
    Han, Yubing
    Wang, Shiming
    Wang, Zekun
    WATER, 2025, 17 (01)
  • [29] DESIGN PROCEDURE TO OPTIMIZE THE PERFORMANCE OF A TIDAL CURRENT TURBINE BLADE
    Jo, Chul-Hee
    Lee, Kang-Hee
    Hwang, Su-Jin
    ENERGY AND SUSTAINABILITY VIII, 2017, 224 : 375 - 384
  • [30] Performance of horizontal axis tidal current turbine by blade configuration
    Jo, Chul Hee
    Yim, Jin Young
    Lee, Kang Hee
    Rho, Yu Ho
    RENEWABLE ENERGY, 2012, 42 : 195 - 206