Magnetic Field Calculation and Multi-objective Optimization of Axial Flux Permanent Magnet Generator with Coreless Stator Windings

被引:1
|
作者
Zhu Jun [1 ]
Li Shaolong [1 ]
Song Dandan [1 ]
Han Qiaoli [2 ]
Li Guanghua [1 ]
机构
[1] Henan Polytech Univ, Sch Elect Engn & Automat, Jiaozuo 454000, Peoples R China
[2] Inner Mongolia Agr Univ, Sch Energy & Transportat Engn, Hohhot, Peoples R China
关键词
Axial flux; Coreless winding factor; 2-D analytical model; Response surface methodology; Finite element method; LINEAR SYNCHRONOUS MOTORS; ANALYTICAL-MODEL; DESIGN; PERFORMANCE; MACHINES; POLE;
D O I
10.5370/JEET.2018.13.4.1585
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
For the problem that the complexity of 3-D modeling and multi parameter optimization, as well as the uncertainty of the winding factor of axial flux permanent magnet generator with coreless windings. The complex 3-D model was simplified into 2-D analytic model, and an analytical formula for the winding factor that adapting different coreless stator winding is proposed in this paper. The analytical solution for air-gap magnetic fields, no-load back EMF, electromagnetic torque, and efficiency are calculated by using this method. The multiple objective and multivariable optimization of the maximum fundamental and the minimum harmonic content of back EMF are performed by using response surface methodology. The proposed optimum design method was applied to make a generator. The generator was tested and the calculated results are compared with the proposed method, which show good agreements.
引用
收藏
页码:1585 / 1594
页数:10
相关论文
共 50 条
  • [21] Multi-objective Stratified Optimization Design of Axial-flux Permanent Magnet Memory Motor
    Cao Y.
    Feng L.
    Mao R.
    Yu L.
    Jia H.
    Jia Z.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2021, 41 (06): : 1983 - 1991
  • [22] Multi-Objective Design Optimization of a Single-sided Axial Flux Permanent Magnet Machine
    Yang, Xu
    Patterson, Dean
    Hudgins, Jerry
    2013 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2013, : 822 - 825
  • [23] A Coreless Axial-Flux Permanent-Magnet Generator for Automotive Applications
    Javadi, Saeid
    Mirsalim, Mojtaba
    IEEE TRANSACTIONS ON MAGNETICS, 2008, 44 (12) : 4591 - 4598
  • [24] Multi-Objective Design Optimization of a Tubular Permanent Magnet Linear Generator With 120° Phase Belt Toroidal Windings
    Yan, Zuoguang
    Si, Jikai
    Li, Zhongwen
    Gan, Chun
    Hu, Yihua
    IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS, 2022, 10 (01) : 236 - 247
  • [25] An Overview on Research Progress of Coreless Stator Axial Flux Permanent Magnet Synchronous Motor
    Liu X.
    Ma T.
    Zhao J.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2020, 40 (01): : 257 - 273
  • [26] Analytical design method of stator-coreless axial flux permanent magnet machines
    Dong, Jianning
    Huang, Yunkai
    Jin, Long
    Lin, Heyun
    Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, 2013, 28 (03): : 43 - 49
  • [27] Investigation on Static Characteristics of an Axial-Flux Permanent Magnet Machine with Coreless Stator
    曹永娟
    黄允凯
    金龙
    余莉
    Journal of Donghua University(English Edition), 2014, 31 (01) : 6 - 9
  • [28] Multi-Objective Optimization Design of Bearingless Permanent Magnet Synchronous Generator
    Hua, Yizhou
    Zhu, Huangqiu
    Xu, Ying
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2020, 30 (04)
  • [29] A Novel Approach to the Analysis of the Axial-Flux Permanent-Magnet Generator With Coreless Stator Supplying a Rectifier Load
    Wang, Weimin
    Cheng, K. W. E.
    Ding, K.
    Meng, L. C.
    IEEE TRANSACTIONS ON MAGNETICS, 2011, 47 (10) : 2391 - 2394
  • [30] Multi-objective approach of design optimisation of axial flux permanent magnet motor
    Cvetkovski, Goga
    Petkovska, Lidija
    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2016, 51 : S115 - S123