CO2 desorption via microwave heating for post-combustion carbon capture

被引：47

作者：

Chronopoulos, Theo ^{[1
,2
]}

Fernandez-Diez, Yolanda ^{[1
,2
]}

Maroto-Valer, M. Mercedes ^{[1
,2
]}

Ocone, Raffaella ^{[2
]}

Reay, David A. ^{[2
]}

机构：

[1] Heriot Watt Univ, CICCS, Sch Engn & Phys Sci, Edinburgh EH14 4AS, Midlothian, Scotland

[2] Heriot Watt Univ, IMPEE, Sch Engn & Phys Sci, Edinburgh EH14 4AS, Midlothian, Scotland

来源：

MICROPOROUS AND MESOPOROUS MATERIALS | 2014年 / 197卷

基金：

英国工程与自然科学研究理事会;

关键词：

Activated carbon; CO2; desorption; Microwave heating; ACTIVATED CARBONS; REGENERATION;

D O I：

10.1016/j.micromeso.2014.06.032

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

In this work, a comparison of CO2 desorption rates of microporous activated carbon (AC) using Microwave Swing Desorption (MSD) and Temperature Swing Desorption (TSD) is reported. For the purposes of this study, a modified microwave oven and a conventional oven were used, heating the AC packed bed to two different temperatures (70 degrees C and 130 degrees C). Results showed that microwaves are able to enhance the rate of CO2 desorption from the AC, contributing to a four times faster overall desorption process, compared to conventional heating desorption. (C) 2014 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/).

引用

页码：288 / 290

页数：3

共 50 条

[31] Dynamic Operation and Simulation of Post-Combustion CO2 Capture
Gaspar, Jozsef
Gladis, Arne
Jorgensen, John Bagterp
Thomsen, Kaj
von Solms, Nicolas
Fosbol, Philip Loldrup
8TH TRONDHEIM CONFERENCE ON CO2 CAPTURE, TRANSPORT AND STORAGE, 2016, 86 : 205 - 214
[32] Capacity and kinetics of solvents for post-combustion CO2 capture
Bruder, Peter
Svendsen, Hallvard F.
6TH TRONDHEIM CONFERENCE ON CO2 CAPTURE, TRANSPORT AND STORAGE, 2012, 23 : 45 - 54
[33] Development of adsorbent technologies for post-combustion CO2 capture
Drage, T. C.
Smith, K. M.
Pevida, C.
Arenillas, A.
Snape, C. E.
GREENHOUSE GAS CONTROL TECHNOLOGIES 9, 2009, 1 (01): : 881 - 884
[34] Sensor placement for post-combustion CO2 capture plants
Liu, Siyu
Yin, Xunyuan
Liu, Jinfeng
2023 AMERICAN CONTROL CONFERENCE, ACC, 2023, : 3454 - 3459
[35] Exergoeconomic Analysis of Post-Combustion CO2 Capture Processes
Schach, M. -O.
Schneider, R.
Schramm, H.
Repke, J. -U.
20TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, 2010, 28 : 997 - 1002
[36] Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
Rubiera, F. (frubiera@incar.csic.es), 1600, Elsevier B.V., Netherlands (230):
[37] 3D-printed activated carbon for post-combustion CO2 capture
Zafanelli, Lucas F. A. S.
Henrique, Adriano
Steldinger, Hendryk
Diaz de Tuesta, Jose L.
Glaesel, Jan
Rodrigues, Alirio E.
Gomes, Helder T.
Etzold, Bastian J. M.
Silva, Jose A. C.
MICROPOROUS AND MESOPOROUS MATERIALS, 2022, 335
[38] Corrosion Behavior of Carbon Steel in Piperazine Solutions for Post-combustion CO2 Capture
Zheng, Liangfu
Landon, James
Matin, Naser
Li, Zhiao
Qi, Guojie
Liu, Kunlei
CORROSION (GENERAL) - 225TH ECS MEETING, 2014, 61 (20): : 81 - 95
[39] Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
Gonzalez, A. S.
Plaza, M. G.
Rubiera, F.
Pevida, C.
CHEMICAL ENGINEERING JOURNAL, 2013, 230 : 456 - 465
[40] Corrosion Behavior of Carbon Steel in Diethylenetriamine Solution for Post-combustion CO2 Capture
Chen, Xinyue
Cui, Yongkang
Wang, Shujuan
ACS OMEGA, 2024, 9 (11): : 13067 - 13080

← 1 2 3 4 5 →