Some Aspects Regarding Micro-scale EDM Drilling Process

被引：1
|
作者：
Dodun, Oana [1 ]
Panaite, Carmen Ema [2 ]
Gherman, Lorelei [1 ]
机构：
[1] Tech Univ Gheorghe Asachi Iasi, Dept Machine Mfg, 59 A,D Mangeron Blvd, Iasi 700050, Romania
[2] Tech Univ Gheorghe Asachi Iasi, Dept Mech Engn & Automot, 59 A,D Mangeron Blvd, Iasi 700050, Romania
来源：
INNOVATIVE MANUFACTURING ENGINEERING | 2013年 / 371卷
关键词：
electrical discharge machining; micromachining; hole drilling; material removal rate; electrode wear rate; accuracy;
D O I：
10.4028/www.scientific.net/AMM.371.285
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Electrical discharge machining is the most extensively non-conventional machining process used to obtain complicated shapes with high accuracy in a wide variety of materials. In this paper, the results of an experimental approach performed to deepen understanding of the complex micro-EDM drilling process and the shape of the obtained micro-hole are presented. The experiments were conducted by using a Sodick A3DL ram electrical discharge machine using Cooper and Graphite tool electrodes of different diameters. The effectiveness of the EDM process was evaluated in terms of the material removal rate (MRR) and electrode wear ratio (EWR).
引用
收藏
页码：285 / +
页数：2
相关论文
共 50 条
  • [31] Solidification at the micro-scale
    Howe, A
    STEEL RESEARCH INTERNATIONAL, 2003, 74 (07): : 418 - 422
  • [32] Nickel micro-spike for micro-scale biopsy using LiGA process
    Kim, Gisub
    Park, Sunkil
    Koo, Kyo-in
    Choi, Hyun-Min
    Jung, Myeong-Jun
    Song, Si-Young
    Bang, Seoung-Min
    Cho, Dongil 'Dan'
    SYNCHROTRON RADIATION INSTRUMENTATION, PTS 1 AND 2, 2007, 879 : 1499 - +
  • [33] EXPERIMENTAL TESTING OF MICRO-SCALE SELF ASSEMBLY PROCESS MODEL
    Carballo, Jose M.
    Hollis, Sean
    Crane, Nathan
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 11, 2012, : 337 - 343
  • [34] Breakthrough phenomena in drilling micro holes by EDM
    Bellotti, Mattia
    Qian, Jun
    Reynaerts, Dominiek
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2019, 146
  • [35] The downsizing effects in EDM drilling of micro holes
    D'Urso, G.
    Maccarini, G.
    Merla, C.
    SHEET METAL 2013, 2013, 549 : 503 - 510
  • [36] Recent progress in micro-scale energy storage devices and future aspects
    Tyagi, Ankit
    Tripathi, Kumud Malika
    Gupta, Raju Kumar
    JOURNAL OF MATERIALS CHEMISTRY A, 2015, 3 (45) : 22507 - 22541
  • [37] Some Aspects Regarding The Simulation Of Injection Process
    Mindru, Teodor Daniel
    Ciofu, Ciprian Dumitru
    Nedelcu, Dumitru
    2ND INTERNATIONAL CONFERENCE ON INNOVATIONS, RECENT TRENDS AND CHALLENGES IN MECHATRONICS, MECHANICAL ENGINEERING AND NEW HIGH-TECH PRODUCTS DEVELOPMENT (MECAHITECH '10), 2010, : 169 - 172
  • [38] INVESTIGATION ON CRYOGENIC COOLING OF MICRO EDM DRILLING PROCESS ON AISI 304 STAINLESS STEEL
    Raja, Manivannan
    Murugasen, Pradeep Kumar
    Periannapillai, Hariharan
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2, 2016,
  • [39] Mechanism design and process control of micro-EDM for drilling deep hole of bellows
    Peng Yu
    Jinkai Xu
    Yonggang Hou
    Huadong Yu
    The International Journal of Advanced Manufacturing Technology, 2021, 115 : 2423 - 2432
  • [40] INVESTIGATING THE MICRO-EDM MACHINABILITY OF BULK METALLIC GLASS IN MICRO-EDM DRILLING
    Liu, Chong
    Rashid, Asif
    Jahan, Muhammad P.
    Ma, Jianfeng
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 2A, 2019,
12345