On the Design of a 3D LTE Antenna for Automotive Applications based on MID Technology

被引：0
|
作者：
Friedrich, A. [1 ]
Geck, B. [1 ]
Klemp, O. [2 ]
Kellermann, H. [2 ]
机构：
[1] Leibniz Univ Hannover, Inst Hochfrequenztech & Funksyst, Hannover, Germany
[2] BMW Forsch Techn, Munich, Germany
来源：
2013 EUROPEAN MICROWAVE CONFERENCE (EUMC) | 2013年
关键词：
MID; LDS; antennas; automotive application; LTE;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper presents the design of a long-term evolution (LTE) antenna and its integration on the 3D surface of the mounting compartment of an automotive roof-top antenna, using molded interconnect device (MID) technology. In the first step the design of the planar LTE antenna is shown. This antenna provides an input matching better than 10 dB in the desired frequency band and exhibits an omnidirectional radiation characteristic in the horizontal plane. Subsequently, this antenna is bent on the surface of a roof antenna housing. The effects of geometrical mapping of the planar antenna structure to the 3D surface in terms of input matching and radiation characteristics are analyzed. Based on these findings, a conformal and optimized two antenna system is introduced and discussed. A prototype realized by MID laser direct structuring (LDS) is presented and the measured antenna performance is compared to simulation results. An excellent agreement between measured and simulated results is observed. Finally, the prototype meets the specification requirements.
引用
收藏
页码：640 / 643
页数：4
相关论文
共 50 条
  • [21] Antenna on Chip Design Utilizing 3D Integration for Mixed Signal Applications
    Adamshick, S.
    Johnson, A.
    Moriarty, K.
    Tremblay, W.
    Burke, J.
    2017 IEEE 60TH INTERNATIONAL MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS (MWSCAS), 2017, : 209 - 212
  • [22] DESIGN OF A DECOUPLED MIMO ANTENNA FOR LTE APPLICATIONS
    Park, Byeong-Yong
    Choi, Jung-Hwan
    Park, Seong-Ook
    Yang, Tae-Sik
    Byun, Joon-Ho
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2011, 53 (03) : 582 - 586
  • [23] Design of Reconfigurable Antenna for LTE and WLAN Applications
    Bezawada, Vijay Narasimha
    Shambavi, K.
    Alex, Zachariah C.
    2013 INTERNATIONAL CONFERENCE ON COMMUNICATIONS AND SIGNAL PROCESSING (ICCSP), 2013, : 51 - 54
  • [24] Printed Antenna Design for LTE Mobile Applications
    Zeya, Zeba
    Badhai, Ritesh Kr
    Suraj, Priyadarshi
    2019 INTERNATIONAL CONFERENCE ON WIRELESS COMMUNICATIONS, SIGNAL PROCESSING AND NETWORKING (WISPNET 2019): ADVANCING WIRELESS AND MOBILE COMMUNICATIONS TECHNOLOGIES FOR 2020 INFORMATION SOCIETY, 2019, : 383 - 387
  • [25] The 3D Solid Modeling Technology and Its Applications in Machine Design
    Feng Guanglin
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON INTELLIGENT SYSTEMS RESEARCH AND MECHATRONICS ENGINEERING, 2015, 121 : 776 - 779
  • [26] 3D roll forming center for automotive applications
    Sedlmaier, Albert
    Dietl, Thomas
    PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 : 767 - 774
  • [27] 3D Antenna Characterization for WPT Applications
    Jordao, Marina
    Pires, Diogo
    Belo, Daniel
    Pinho, Pedro
    Carvalho, Nuno Borges
    SENSORS, 2021, 21 (13)
  • [28] Design and Simulation of 3D Layout for MID Based On Open CASCADE
    Zhuo, Yong
    Wu, Yanjun
    Peng, Juan
    ADVANCED MECHANICAL DESIGN, PTS 1-3, 2012, 479-481 : 1978 - 1981
  • [29] 3D Printed Slotted Waveguide Array Antenna for Automotive Radar Applications in W-Band
    Lomakin, K.
    Simon, D.
    Sippel, M.
    Helmreich, K.
    Seler, E.
    Tong, Z.
    Reuter, R.
    Gold, G.
    2018 15TH EUROPEAN RADAR CONFERENCE (EURAD), 2018, : 389 - 392
  • [30] 3D Printed Slotted Waveguide Array Antenna for Automotive Radar Applications in W-Band
    Lomakin, K.
    Simon, D.
    Sippel, M.
    Helmreich, K.
    Seler, E.
    Tong, Z.
    Reuter, R.
    Gold, G.
    2018 48TH EUROPEAN MICROWAVE CONFERENCE (EUMC), 2018, : 1409 - 1412
12345