The Fracture Toughness of a Highly Filled Polymer Composite

被引：4
|
作者：
Stapountzi, O. A. [1 ]
Charalambides, M. N. [1 ]
Williams, J. G. [1 ,2 ]
机构：
[1] Imperial Coll London, Dept Mech Engn, London, England
[2] Univ Sydney, Sch Aerosp Mech & Mechatron Engn, Sydney, NSW, Australia
来源：
RECENT ADVANCES IN MECHANICS | 2011年
关键词：
TEMPERATURE;
D O I：
10.1007/978-94-007-0557-9_24
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Fracture toughness values are given for an ATH-PMMA composite for filler volume fractions ranging from 0.35 to 0.49 and tested over the temperature range from 0 to 90 degrees C. The toughness decreased with increasing filler content contrary to expectations. A toughness model based on debonding, and subsequent plastic void growth was extended from a low volume fraction form to accommodate interaction between particles. From the fitted data it was possible to calculate the adhesion energy of the particles and the average particle size. The former was somewhat less than the matrix toughness and the latter agreed quite well with the sizes found from particle size measurements on the filler and surface roughness measurements on the fracture surfaces.
引用
收藏
页码：447 / 459
页数：13
相关论文
共 50 条
  • [31] Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials
    F. V. Grechnikov
    Ya. A. Erisov
    I. N. Petrov
    Russian Metallurgy (Metally), 2019, 2019 : 341 - 345
  • [32] On the combined mode I mode II fracture toughness of a fiber reinforced polymer composite
    Manoharan, M
    Xiao, H
    INTERNATIONAL JOURNAL OF FRACTURE, 1997, 88 (01) : L3 - L7
  • [33] Tuning interlaminar fracture toughness of fine z-pin reinforced polymer composite
    Li, Min
    Che, Zhe
    Wang, Shaokai
    Zhou, Yubo
    Fu, Hao
    Gu, Yizhuo
    Zhang, Wei
    MATERIALS & DESIGN, 2021, 212
  • [34] Evaluation of fracture toughness properties of polymer concrete composite using deep learning approach
    Niaki, Mostafa Hassani
    Ahangari, Morteza Ghorbanzadeh
    Izadi, Milad
    Pashaian, Matin
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2023, 46 (02) : 603 - 615
  • [35] FRACTURE MECHANIC ANALYSIS OF TOUGHNESS BEHAVIOR OF FILLED THERMOPLASTICS
    GRELLMAN, W
    BOHSE, J
    SEIDLER, S
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1990, 21 (09) : 359 - 364
  • [36] FRACTURE-TOUGHNESS OF FILLED POLYPROPYLENE COPOLYMER SYSTEMS
    FERNANDO, PL
    POLYMER ENGINEERING AND SCIENCE, 1988, 28 (12): : 806 - 814
  • [37] Evaluation of fracture toughness of epoxy polymer composite incorporating micro/nano silica, rubber and CNTs
    Cozza, Ronaldo Câmara
    Verma, Vikas
    Cozza, Ronaldo Câmara (rcamara@fei.edu.br), 1600, Associacao Brasileira de Polimeros (30):
  • [38] Evaluation of fracture toughness of epoxy polymer composite incorporating micro/nano silica, rubber and CNTs
    Cozza, Ronaldo Camara
    Verma, Vikas
    POLIMEROS-CIENCIA E TECNOLOGIA, 2020, 30 (03):
  • [39] Fracture toughness of highly deformable polymeric materials
    Brighenti, Roberto
    Carpinteri, Andrea
    Artoni, Federico
    XXIV ITALIAN GROUP OF FRACTURE CONFERENCE, 2017, 2017, 3 : 18 - 24
  • [40] Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal-Polymer Composite Materials
    Grechnikov, F. V.
    Erisov, Ya. A.
    Petrov, I. N.
    RUSSIAN METALLURGY, 2019, 2019 (04): : 341 - 345
12345