Simulation tests in whole building heat and moisture transfer

被引：0
|
作者：
Rode, Carsten [1 ]
Peuhkuri, Ruut [1 ]
Woloszyn, Monika [2 ]
机构：
[1] Tech Univ Denmark, Lyngby, Denmark
[2] UCBL, INSA Lyon, CETHIL, CNRS,UMR 5008, Lyon, France
来源：
RESEARCH IN BUILDING PHYSICS AND BUILDING ENGINEERING | 2006年
关键词：
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
An important part of the International Energy Agency project, ECBCS, Annex 41 is about modelling the integral heat, air and moisture transfer processes that take place in "whole buildings". Such modelling deals with all most relevant elements of buildings: The indoor air, the building envelope, the inside constructions, furnishing and systems. These building elements interact with each other and they are influenced by the use of the building, the building services, and the outside climate. IEA Annex 41 aims to reach new modelling possibilities in integral building simulation, and to document these. The paper explains about some new simulation tests used in IEA Annex 41 and elaborates about the challenges brought by these exercises.
引用
收藏
页码：527 / +
页数：2
相关论文
共 50 条
  • [31] An analytical method to calculate the coupled heat and moisture transfer in building materials
    Qin, MG
    Belarbi, R
    Aït-Mokhtar, A
    Seigneurin, A
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2006, 33 (01) : 39 - 48
  • [32] Numerical modelling of coupled heat, air and moisture transfer in building envelopes
    Maliki, Mustapha
    Laredj, Nadia
    Missoum, Hanifi
    Bendani, Karim
    Naji, Hassan
    MECHANICS & INDUSTRY, 2015, 16 (05)
  • [33] The influence of soil moisture transfer on building heat loss via the ground
    Janssen, H
    Carmeliet, J
    Hens, H
    BUILDING AND ENVIRONMENT, 2004, 39 (07) : 825 - 836
  • [34] DEVELOPMENT OF MODELING FOR COUPLED HEAT AND MOISTURE TRANSFER IN POROUS BUILDING ENVELOPE
    Chen, G. J.
    Chen, Y. M.
    Tan, Y. Y.
    Liu, X. W.
    7TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATING AND AIR CONDITIONING, PROCEEDINGS OF ISHVAC 2011, VOLS I-IV, 2011, : 1059 - 1063
  • [35] Building Moisture Load Analysis Based on Heat and Mass Coupled Transfer
    Kong, Fanhong
    PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ELECTRONIC & MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY (EMEIT-2012), 2012, 23
  • [36] Coupled heat and moisture transfer in building material with freezing and thawing process
    Shen, Xianwen
    Li, Longjian
    Cui, Wenzhi
    Feng, Ya
    JOURNAL OF BUILDING ENGINEERING, 2018, 20 : 609 - 615
  • [37] Coupled heat and moisture transfer in multi-layer building materials
    Qin, Menghao
    Belarbi, Rafik
    Ait-Mokhtar, Abdelkarim
    Nilson, Lars-Olof
    CONSTRUCTION AND BUILDING MATERIALS, 2009, 23 (02) : 967 - 975
  • [38] Advances in Coupled Heat and Moisture Transfer in Building Envelope: A Review and Discussion
    Cai, Wei
    Zhang, Lina
    Wu, Zhaohui
    2011 INTERNATIONAL CONFERENCE ON MACHINE INTELLIGENCE (ICMI 2011), PT 1, 2011, 3 : 286 - 292
  • [39] Ground-coupled heat transfer in building simulation
    Bansal, P
    Jones, R
    Addison, M
    PROCEEDINGS OF THE 23RD NATIONAL PASSIVE SOLAR CONFERENCE, 1998, 23 : 249 - 255
  • [40] Simulation of combined heat moisture and contaminant transport in building science problems
    Kerestecioglu, Alp
    Brahma, Premasis
    Gu, Lixing
    Proceedings - ACEEE Summer Study on Energy Efficiency in Buildings, 1990,
12345