Dry e-beam etching of resist for optics

被引：0
|
作者：
Rogozhin, A. [1 ]
Bruk, M. [1 ,2 ]
Zhikharev, E. [1 ]
Streltsov, D. [3 ]
Spirin, A. [2 ]
Hramchihina, J. [1 ,4 ]
机构：
[1] RAS, Inst Phys & Technol, Moscow 117218, Russia
[2] L Ya Karpov Inst Phys Chem, Moscow 105064, Russia
[3] RAS, Enikolopov Inst Synthet Polymer Mat, Moscow 117393, Russia
[4] Moscow Inst Phys & Technol, Moscow 141700, Russia
来源：
3RD INTERNATIONAL SCHOOL AND CONFERENCE ON OPTOELECTRONICS, PHOTONICS, ENGINEERING AND NANOSTRUCTURES (SAINT PETERSBURG OPEN 2016) | 2016年 / 741卷
关键词：
D O I：
10.1088/1742-6596/741/1/012115
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Method of dry e-beam etching of resist (DEBER) is described. It appears that the method could be extremely useful for formation of wide range of structures for optics and optoelectronics. It is relatively simple to form diffraction or binary gratings, some diffractive optical elements (DOE), 3D structures or planar photonic crystals. Method could be realised in any focused e-beam induced process (FEBIP) system or in e-beam lithographer with minor modifications. DEBER method is significantly more productive than standard or grayscale e-beam lithography. Typical exposure time for 3x3.9 mm(2) area is about 10-100 s. Examples of structures formed by the DEBER method that could be used in optoelectronics are presented.
引用
收藏
页数：4
相关论文
共 50 条
  • [41] SURFACE IMAGING AND DRY DEVELOPMENT FOR E-BEAM LITHOGRAPHY
    BAIK, KH
    JONCKHEERE, R
    SEABRA, A
    VANDENHOVE, L
    MICROELECTRONIC ENGINEERING, 1992, 17 (1-4) : 269 - 273
  • [42] POLY(ARYLINE IMIDE)S AS E-BEAM RESIST - SENSITIVITY AND RESOLUTION
    CHIEN, JCW
    GONG, BM
    JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 1989, 27 (10) : 3343 - 3352
  • [43] Pattern transfer from the E-Beam resist, over the nanoimprint resist and to the final silicon substrate
    He, Jian
    Howitz, S.
    Richter, K.
    Bartha, J. W.
    Moench, J. I.
    ADVANCED ETCH TECHNOLOGY FOR NANOPATTERNING, 2012, 8328
  • [44] Bilayer resist used in e-beam lithography for deep narrow structures
    van Delft, FCMJM
    MICROELECTRONIC ENGINEERING, 1999, 46 (1-4) : 369 - 373
  • [45] Bilayer resist used in e-beam lithography for deep narrow structures
    Philips Research Laboratories, Prof. Holstlaan 4, 5656 AA Eindhoven, Netherlands
    Microelectron Eng, 1 (369-373):
  • [46] HIGH-ASPECT-RATIO RESIST STRUCTURES BY E-BEAM OVEREXPOSURE
    DEKONING, H
    ZANDBERGEN, P
    VERHEIJEN, MJ
    BIERMANN, UKP
    MICROELECTRONIC ENGINEERING, 1995, 27 (1-4) : 421 - 424
  • [47] A SENSITIVE, ETCH RESISTANT, POSITIVE TONE E-BEAM RESIST SYSTEM
    ITO, H
    PEDERSON, LA
    MACDONALD, SA
    CHENG, YY
    LYERLA, JR
    WILLSON, CG
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1988, 135 (06) : 1504 - 1508
  • [48] Optimization of HSQ resist e-beam processing technique on GaAs material
    Lauvernier, D
    Vilcot, JP
    François, M
    Decoster, D
    MICROELECTRONIC ENGINEERING, 2004, 75 (02) : 177 - 182
  • [49] Stable e-beam metrology on ArF resist for advanced process control
    Ke, CM
    Yen, A
    Yee, J
    Chu, M
    Fu, S
    Huang, E
    Yeh, D
    ADVANCES IN RESIST TECHNOLOGY AND PROCESSING XIX, PTS 1 AND 2, 2002, 4690 : 598 - 605
  • [50] Correlation study on resist outgassing between EUV and E-beam irradiation
    Kikuchi, Yukiko
    Katayama, Kazuhiro
    Takagi, Isamu
    Sugie, Norihiko
    Takahashi, Toshiya
    Shiobara, Eishi
    Tanaka, Hiroyuki
    Inoue, Soichi
    Watanabe, Takeo
    Harada, Tetsuo
    Kinoshita, Hiroo
    EXTREME ULTRAVIOLET (EUV) LITHOGRAPHY V, 2014, 9048
12345