Low-Speed and Standstill Operation of a Sensorless Direct Torque and Flux Controlled IPM Synchronous Motor Drive

被引：83

作者：

Foo, Gilbert ^{[1
]}

Sayeef, Saad ^{[1
]}

Rahman, M. F. ^{[1
]}

机构：

[1] Univ New S Wales, Sydney, NSW 2052, Australia

来源：

IEEE TRANSACTIONS ON ENERGY CONVERSION | 2010年 / 25卷 / 01期

关键词：

Direct torque and flux control (DTFC); sensorless; signal injection; zero speed; VARIABLE-STRUCTURE CONTROL; SIGNAL INJECTION; MACHINE; OBSERVER; POSITION; RIPPLE;

D O I：

10.1109/TEC.2009.2025407

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

This paper investigates a sensorless direct torque and flux control scheme for interior permanent magnet synchronous motor drives at low speeds, including standstill. Closed-loop control of both torque and stator flux linkage are achieved by using two proportional-integral controllers. The reference voltage vectors are generated by a space vector modulation unit. A high-frequency signal injection technique is adopted at low speeds to obtain the rotor position information. A hybrid current-voltage model flux observer with a smooth handover algorithm estimates the stator flux linkage over the whole speed range. Experimental results confirm the effectiveness of the proposed method.

引用

页码：25 / 33

页数：9

共 50 条

[21] Performance of a Direct Torque Controlled IPM Drive System in the Low Speed Region
Haghbin, Saeid
Lundmark, Sonja
Carlson, Ola
IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE 2010), 2010, : 1420 - 1425
[22] Wide Speed Direct Torque and Flux Controlled IPM Synchronous Motor Drive Using a Combined Adaptive Sliding Mode Observer and HF Signal Injection
Foo, Gilbert
Rahman, M. F.
JOURNAL OF POWER ELECTRONICS, 2009, 9 (04) : 582 - 592
[23] An improved stator flux estimation for a variable structure direct torque controlled IPM synchronous motor drive using a sliding observer
Xu, Z
Rahman, MF
CONFERENCE RECORD OF THE 2005 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-4, 2005, : 2484 - 2490
[24] Direct Torque and Flux Controlled IPM Synchronous Motor Drive using a Hybrid Signal Injection and Adaptive Sliding Mode Observer
Foo, Gilbert
Rahman, M. F.
TENCON 2009 - 2009 IEEE REGION 10 CONFERENCE, VOLS 1-4, 2009, : 685 - 691
[25] Direct Torque and Flux Regulation of an IPM Synchronous Motor Drive Using Variable Structure Control Approach
Xu, Z.
Rahman, M. F.
IECON 2004: 30TH ANNUAL CONFERENCE OF IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOL 3, 2004, : 2733 - 2738
[26] A sensorless speed estimator for the direct torque control of an interior permanent magnet synchronous motor drive
Rahman, MF
Haque, ME
Zhong, L
Nagrial, M
INTERNATIONAL CONFERENCE ON POWER ELECTRONICS, MACHINES AND DRIVES, 2002, (487): : 504 - 509
[27] Direct torque and flux regulation of an IPM synchronous motor drive using variable structure control approach
Xu, Zhuang
Rahman, M. Faz
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2007, 22 (06) : 2487 - 2498
[28] Sensorless Control of IPM Motors in the Low-Speed Range and at Standstill by HF Injection and DFT Processing
Bolognani, Silverio
Calligaro, Sandro
Petrella, Roberto
Tursini, Marco
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2011, 47 (01) : 96 - 104
[29] Torque Ripple Reduction Method in Position Sensorless Control at Standstill/Low-speed Operation of the Wound-field Synchronous Motor with Double Three-phase Wound Stator
Imai, Koji
Doki, Shinji
Jung, Sukhwa
2016 XXII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2016, : 1221 - 1226
[30] A variable structure torque and flux controller for a DTC IPM synchronous motor drive
Xu, Z
Rahman, MF
PESC 04: 2004 IEEE 35TH ANNUAL POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-6, CONFERENCE PROCEEDINGS, 2004, : 445 - 450

← 1 2 3 4 5 →