Experimental investigation on the aerodynamic behavior of square cylinders with rounded corners

The influence of corner shaping on the aerodynamic behavior of square cylinders is studied through wind tunnel tests. Beside the sharp-edge corner condition considered as a benchmark, two different rounded-corner radii (r/b=1/15 and 2/15) are studied. Global forces and surface pressure are simultaneously measured in the Reynolds number range between 1.7 x 10(4) and 2.3 x 10(5). The measurements are extended to angles of incidence between 00 and 450, but the analysis and the discussion presented herein is focused on the low angle of incidence range. It is found that the critical angle of incidence, corresponding to the flow reattachment on the lateral face exposed to the flow, decreases as r/b increases and that an intermittent flow condition exists. In the case of turbulent incoming flow, two different aerodynamic regimes governed by the Reynolds number have been recognized. (C) 2013 Elsevier Ltd. All rights reserved.