Comparison of dynamic behaviour of EMA-3 railgun under differently induced loadings

被引:0
|
作者
Tumonis, L. [1 ]
Schneider, M. [2 ]
Kacianauskas, R. [1 ]
Kaceniauskas, A. [1 ]
机构
[1] Vilnius Gediminas Tech Univ, LT-10223 Vilnius, Lithuania
[2] French German Res Inst St Louis, F-68301 St Louis, France
来源
MECHANIKA | 2009年 / 04期
关键词
STRUCTURAL MECHANICS; FRICTION;
D O I
暂无
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Comparison of dynamic behaviour of EMA-3 railgun of the French-German Research institute of Saint-Louis (ISL) under differently. induced loadings is presented. Both magnetic pressure loads are generated by two current injections and lead to identical projectile velocities reaching up to 1200 m/s. The main difference between the loads lays in different locations of the injection points. FE simulation results presented in terms of deflections of the sliding rail surface illustrate, that loading differences result into different dynamic behaviours of the railgun. The breech-feed loading, where both injections are induced in the start position of the rail, leads to higher oscillation amplitudes of rail deflections. It was found, that the railgun structure is dynamically less sensitive to the distributed (DES) loading, induced in two different points.
引用
收藏
页码:31 / 37
页数:7
相关论文
共 50 条
  • [31] Dynamic failure of 3D printed negative-stiffness meta-sandwich structures under repeated impact loadings
    Gan, Jiakang
    Li, Fenglei
    Li, Keqiang
    Li, Eric
    Li, Bing
    COMPOSITES SCIENCE AND TECHNOLOGY, 2023, 234
  • [32] Dynamic response of a sea-crossing cable-stayed suspension bridge under simultaneous wind and wave loadings induced by a landfall typhoon
    Wei, Kai
    Zhong, Xi
    Cai, Haowei
    Li, Xiaozhen
    Xiao, Haizhu
    OCEAN ENGINEERING, 2024, 293
  • [33] Behaviour of 3D printed re-entrant chiral auxetic (RCA) geometries under in-plane and out-of-plane loadings
    Zahra, Tatheer
    SMART MATERIALS AND STRUCTURES, 2021, 30 (11)
  • [34] Simulation of elasto-plastic behaviour of an artificial 3D-structure under dynamic loading
    Romanova, V
    Balokhonov, R
    Makarov, P
    Schmauder, S
    Soppa, E
    COMPUTATIONAL MATERIALS SCIENCE, 2003, 28 (3-4) : 518 - 528
  • [35] Time-dependent behaviour of 3D printed fibre-reinforced limestone calcined clay cement concrete under sustained loadings
    Ibrahim, Kamoru
    van Zijl, Gideon
    Babafemi, Adewumi John
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 446
  • [36] Rock failure induced by dynamic unloading under 3D stress state
    Tao, Ming
    Li, Xibing
    Li, Diyuan
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2013, 65 : 47 - 54
  • [37] Mechanical behavior, energy absorption, and failure mechanism of 3D-printed hexagonal honeycomb core under dynamic and quasi-static loadings
    Ainin, F. Nur
    Azaman, M. D.
    Majid, M. S. Abdul
    Ridzuan, M. J. M.
    POLYMER COMPOSITES, 2024,
  • [38] CO-induced dynamic behaviour of Al2O3-supported Pd nanoparticles at room temperature
    Bonavia, D.
    Ricchebuono, A.
    Lazzarini, P.
    Vottero, E.
    Pellegrini, R.
    Piovano, A.
    Groppo, E.
    Ferri, D.
    Checchia, S.
    ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, 2024, 80
  • [39] Effects of Printing Parameters on the Fatigue Behaviour of 3D-Printed ABS under Dynamic Thermo-Mechanical Loads
    He, Feiyang
    Khan, Muhammad
    POLYMERS, 2021, 13 (14)
  • [40] Unravelling the La dopant induced physicochemical changes and the electrical behaviour on BaFeO3 under oxidising and reducing atmospheres
    Prabhahari, V
    Raja, N.
    Iniyan, S.
    Babu, K. Suresh
    PHYSICA SCRIPTA, 2024, 99 (06)