Prediction of Adiabatic Shear Critical Cutting Conditions of hardened AISI 1045 Steel with Different Hardness

被引：0
|
作者：
Li, Guohe [1 ]
Cai, Yujun [1 ]
Qi, Houjun [1 ]
机构：
[1] TUTE, Tianjin Key Lab High Speed Cutting & Accurate Pro, Tianjin, Peoples R China
来源：
ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII | 2014年 / 589-590卷
关键词：
hardened AISI 1045 steel; adiabatic shear; critical cutting conditions; prediction; CHIP FORMATION; INSTABILITY;
D O I：
10.4028/www.scientific.net/KEM.589-590.134
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A method for building the constitutive relationship based on the J-C model and hardness is presented through considering the influence of hardness on the yield strength and the tensile strength. A constitutive relationship of hardened AISI 1045 is built by this method and the adiabatic shear critical cutting conditions of three kinds of hardness AISI 1045 steel are prediction through a model building by the linear pertubation analysis which considering the influence of compression stress of the primary shear zone, the cutting conditions and the constitutive relationship. For proving the prediction results, some orthogonal cutting experiments are performed to get the critical cutting conditions of adiabatic shear. The comparison shows that the prediction results are consistent with that of experiments.
引用
收藏
页码：134 / 139
页数：6
相关论文
共 50 条
  • [21] COMPARISON OF BEHAVIOUR WEAR OF NITRIDED AND INDUCTION HARDENED NITRIDED AISI 1045 STEEL
    Schierloh, Gonzalo J.
    Regis, Matias
    Charadia, Raul
    Dalibon, Eugenia L.
    Bruhl, Sonia P.
    AVANCES EN CIENCIAS E INGENIERIA, 2016, 7 (04): : 1 - 8
  • [22] Contact stress by the method of finite elements of the steel AISI 1045 hardened by roller
    Fernandez-Columbie, T.
    Rodriguez-Gonzalez, I.
    Alcantara-Borges, D.
    Fernandez-Guilarte, E.
    REVISTA DE METALURGIA, 2012, 48 (01) : 5 - 12
  • [23] Assessment of the Performance of Microbumped Cutting Tool in Machining of AISI 1045 Steel
    Ma, J.
    Duong, Nick H.
    Lei, Shuting
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B, 2014,
  • [24] Evaluation of an Analytical Model in the Prediction of Machining Temperature of AISI 1045 Steel and AISI 4340 Steel
    Ning, Jinqiang
    Liang, Steven Y.
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2018, 2 (04):
  • [25] Effects of Tool Edge Geometry and Cutting Conditions on the Performance Indicators in Dry Turning AISI 1045 Steel
    Abbas, Adel T.
    El Rayes, Magdy M.
    Al-Abduljabbar, Abdulhamid A.
    Ragab, Adham E.
    Benyahia, Faycal
    Elkaseer, Ahmed
    MACHINES, 2023, 11 (03)
  • [26] Assessment of Microgrooved Cutting Tool in Dry Machining of AISI 1045 Steel
    Ma, Jianfeng
    Duong, Nick H.
    Chang, Shing
    Lian, Yunsong
    Deng, Jianxin
    Lei, Shuting
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2015, 137 (03):
  • [27] Microstructure and hardness of adiabatic shear bands formed during orthogonal cutting of high strength steel
    Duan, Chun-Zheng
    Wang, Min-Jie
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2004, 12 (06): : 602 - 605
  • [28] THE INFLUENCE OF SALT BATH NITRIDING VARIABLES ON HARDNESS LAYER OF AISI 1045 STEEL
    Ghelloudj, Elhadj
    Djebaili, Hamid
    Hannachi, Mohamed Tahar
    Saoudi, Abdenour
    Daheche, Bilal
    ACTA METALLURGICA SLOVACA, 2016, 22 (03): : 188 - 194
  • [29] Cutting simulation with consideration of the material hardening in the shear zone of AISI1045
    Uhlmann, E.
    Henze, S.
    Broemmelhoff, K.
    Reimers, W.
    16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO), 2017, 58 : 91 - 96
  • [30] On the measurement and prediction of temperature fields in machining AISI 1045 steel
    Davies, MA
    Cao, Q
    Cooke, AL
    Ivester, R
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2003, 52 (01) : 77 - 80
12345