Prediction of Adiabatic Shear Critical Cutting Conditions of hardened AISI 1045 Steel with Different Hardness

被引：0
|
作者：
Li, Guohe [1 ]
Cai, Yujun [1 ]
Qi, Houjun [1 ]
机构：
[1] TUTE, Tianjin Key Lab High Speed Cutting & Accurate Pro, Tianjin, Peoples R China
来源：
ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII | 2014年 / 589-590卷
关键词：
hardened AISI 1045 steel; adiabatic shear; critical cutting conditions; prediction; CHIP FORMATION; INSTABILITY;
D O I：
10.4028/www.scientific.net/KEM.589-590.134
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A method for building the constitutive relationship based on the J-C model and hardness is presented through considering the influence of hardness on the yield strength and the tensile strength. A constitutive relationship of hardened AISI 1045 is built by this method and the adiabatic shear critical cutting conditions of three kinds of hardness AISI 1045 steel are prediction through a model building by the linear pertubation analysis which considering the influence of compression stress of the primary shear zone, the cutting conditions and the constitutive relationship. For proving the prediction results, some orthogonal cutting experiments are performed to get the critical cutting conditions of adiabatic shear. The comparison shows that the prediction results are consistent with that of experiments.
引用
收藏
页码：134 / 139
页数：6
相关论文
共 50 条
  • [1] Experimental Study and Theory Prediction On Adiabatic Shear Critical Conditions of Hardened AISI 1045 Steel
    Li, Guohe
    Qi, Tieli
    Cai, Yujun
    Wang, Hongjun
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 3061 - +
  • [2] An Investigation into the Microstructure of Adiabatic Shear Banding in AISI 1045 Hardened Steel due to High Speed Machining
    Duan, C. Z.
    Zhang, L. C.
    Yu, H. Y.
    Wang, M. J.
    MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 321 - +
  • [3] Some Metallurgical Observations of Adiabatic Shear Phenomenon During High Speed Machining AISI 1045 Hardened Steel
    Duan, Chunzheng
    Yu, Haiyang
    Li, Honghua
    Wang, Minjie
    ADVANCED SCIENCE LETTERS, 2011, 4 (6-7) : 2493 - 2497
  • [4] On adiabatic shear localized fracture during serrated chip evolution in high speed machining of hardened AISI 1045 steel
    Gu Liyao
    Wang Minjie
    Duan Chunzheng
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2013, 75 : 288 - 298
  • [5] Adiabatic Shear Localization in High Speed Cutting of Hardened Steel
    Duan, Chunzheng
    Kong, Weisen
    Wang, Zhaoxi
    Wang, Minjie
    RECENT TRENDS IN MATERIALS AND MECHANICAL ENGINEERING MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3, 2011, 55-57 : 983 - 987
  • [6] Characterization of induction hardened and tempered AISI 1045 steel
    Wenish, G. D.
    Prince, M.
    Maniraj, J.
    MATERIA-RIO DE JANEIRO, 2022, 27 (04):
  • [7] Chip control in the dry machining of hardened AISI 1045 steel
    Zhang, X. P.
    Wu, S. B.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (9-12): : 3319 - 3327
  • [8] Experiment Study of Chip Formation and Cutting Force of Hardened AISI 1045 Steel in High Speed Machining
    Li, Guohe
    Yan, Bing
    Cai, Yujun
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 1915 - 1920
  • [9] Chip control in the dry machining of hardened AISI 1045 steel
    X. P. Zhang
    S. B. Wu
    The International Journal of Advanced Manufacturing Technology, 2017, 88 : 3319 - 3327
  • [10] Cutting AISI 1045 steel at very high speeds
    Ye, G. G.
    Xue, S. F.
    Ma, W.
    Jiang, M. Q.
    Ling, Z.
    Tong, X. H.
    Dai, L. H.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2012, 56 : 1 - 9
12345