Inducing very high cycle fretting-fatigue in the ultrasonic regime

被引：11
|
作者：
Filgueiras, Pedro F. [2 ]
Bathias, Claude [1 ]
Palma, Ernani S. [2 ]
Wang, Chong [1 ]
机构：
[1] Univ Paris Ouest, Lab Energet Mecan Electromagnetisme, F-92410 Yule Davray, France
[2] Univ Fed Minas Gerais, Dept Mech Engn, BR-31270901 Belo Horizonte, MG, Brazil
来源：
TRIBOLOGY INTERNATIONAL | 2014年 / 76卷
关键词：
Fretting; Very high cycle fatigue; Ultrasonic testing; Fatigue damage; STEEL;
D O I：
10.1016/j.triboint.2013.10.023
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Early crack initiation due to fretting may have an important role in fatigue strength of steel components, mainly in the very high-cycle regime, i.e., beyond a million cycles. This work aimed to induce very high-cycle fretting-fatigue on a medium strength steel alloy in the ultrasonic regime. Specimens were subjected to push-pull fatigue and 10 mu m-amplitude fretting with crossed cylinders configuration. The normal load was held constant at 30 N. Results showed a knockdown factor of 1.5 for the fatigue strength in the fretting condition under study. The average diameter of the fretted surfaces was found to linearly increase with decreasing axial bulk stress amplitude. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：57 / 62
页数：6
相关论文
共 50 条
  • [31] Effect of mean stress in very high cycle fretting fatigue of a bearing steel
    Teng, Zhenjie
    Wu, Haoran
    Huang, Zhiyong
    Starke, Peter
    INTERNATIONAL JOURNAL OF FATIGUE, 2021, 149
  • [32] Fretting-wear and fretting-fatigue: Relation through a mapping concept
    Fouvry, S
    Kapsa, P
    Vincent, L
    FRETTING FATIGUE: CURRENT TECHNOLOGY AND PRACTICES, 2000, 1367 : 49 - 64
  • [33] Very high cycle fatigue at elevated temperatures: A review on high temperature ultrasonic fatigue
    Avateffazeli, Maryam
    Webster, Garrett
    Tahmasbi, Kamin
    Haghshenas, Meysam
    JOURNAL OF SPACE SAFETY ENGINEERING, 2022, 9 (04): : 488 - 512
  • [34] Very High Cycle Fatigue and Ultrasonic Testing in Multiaxial Loading
    Costa, Pedro R.
    Reis, Luis
    Freitas, Manuel
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2023, 12 (02) : 197 - 213
  • [35] Multiaxial High Cycle Fretting Fatigue
    Araujo, Jose Alexander
    Juvenal Almeida, Gabriel Magalhaes
    Castro, Fabio Comes
    Cardoso, Raphael Araujo
    ICMFF12 - 12TH INTERNATIONAL CONFERENCE ON MULTIAXIAL FATIGUE AND FRACTURE, 2019, 300
  • [36] A procedure for comprehensive investigation of the fretting-fatigue damage of metals
    Tsybanev G.V.
    Kurash Yu.P.
    Strength of Materials, 2001, 33 (05) : 495 - 502
  • [37] Experimental study on fretting-fatigue of bridge cable wires
    Guo, Tong
    Liu, Zhongxiang
    Correia, Jose
    de Jesus, Abilio M. P.
    INTERNATIONAL JOURNAL OF FATIGUE, 2020, 131
  • [38] FRACTOGRAPHIC INVESTIGATION OF FRETTING-WEAR AND FRETTING-FATIGUE IN ALUMINUM-ALLOYS
    LEADBEATER, G
    KOVALEVSKII, VV
    NOBLE, B
    WATERHOUSE, RB
    FATIGUE OF ENGINEERING MATERIALS AND STRUCTURES, 1980, 3 (03): : 237 - 246
  • [39] Analysis of contact stresses in the problems of wear and fretting-fatigue
    Drozdov, Yu.N.
    Sil'verstov, I.N.
    Ushakov, B.N.
    Problemy Mashinostraeniya i Nadezhnos'ti Mashin, 2002, (02): : 50 - 54
  • [40] Variable amplitude loading in the very high-cycle fatigue regime
    Stanzl-Tschegg, SE
    Mayer, H
    Stich, A
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2002, 25 (8-9) : 887 - 896
12345