Inducing very high cycle fretting-fatigue in the ultrasonic regime

被引：11

作者：

Filgueiras, Pedro F. ^{[2
]}

Bathias, Claude ^{[1
]}

Palma, Ernani S. ^{[2
]}

Wang, Chong ^{[1
]}

机构：

[1] Univ Paris Ouest, Lab Energet Mecan Electromagnetisme, F-92410 Yule Davray, France

[2] Univ Fed Minas Gerais, Dept Mech Engn, BR-31270901 Belo Horizonte, MG, Brazil

来源：

TRIBOLOGY INTERNATIONAL | 2014年 / 76卷

关键词：

Fretting; Very high cycle fatigue; Ultrasonic testing; Fatigue damage; STEEL;

D O I：

10.1016/j.triboint.2013.10.023

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Early crack initiation due to fretting may have an important role in fatigue strength of steel components, mainly in the very high-cycle regime, i.e., beyond a million cycles. This work aimed to induce very high-cycle fretting-fatigue on a medium strength steel alloy in the ultrasonic regime. Specimens were subjected to push-pull fatigue and 10 mu m-amplitude fretting with crossed cylinders configuration. The normal load was held constant at 30 N. Results showed a knockdown factor of 1.5 for the fatigue strength in the fretting condition under study. The average diameter of the fretted surfaces was found to linearly increase with decreasing axial bulk stress amplitude. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：57 / 62

页数：6

共 50 条

[1] Experimental study on fretting-fatigue at very high frequency
Tao, H
Bathias, C
REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1996, 93 (05): : 687 - &
[2] Fretting Fatigue Testing of Carburized Alloy Steel in Very High Cycle Regime Using an Ultrasonic Torsional Fatigue Testing Machine
Shimamura, Yoshinobu
Kokubo, Akito
Ishii, Hitoshi
Tohgo, Keiichiro
Fujii, Tomoyuki
Yagasaki, Tooru
Harada, Masamichi
11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2, 2014, 891-892 : 1152 - +
[3] Fretting-fatigue behavior of steel wires in low cycle fatigue
Wang, Dagang
Zhang, Dekun
Ge, Shirong
MATERIALS & DESIGN, 2011, 32 (10): : 4986 - 4993
[4] Fatigue testing of CFRP in the Very High Cycle Fatigue (VHCF) regime at ultrasonic frequencies
Backe, Daniel
Balle, Frank
Eifler, Dietmar
COMPOSITES SCIENCE AND TECHNOLOGY, 2015, 106 : 93 - 99
[5] Investigation of fretting fatigue performance for IN718 dovetail joint in very high cycle regime
Shen, Zeshuai
Huang, Zhiyong
Wang, Jian
Zheng, Liangqi
Qian, Hongjiang
Zhu, Qingyun
INTERNATIONAL JOURNAL OF FATIGUE, 2025, 195
[6] Ultrasonic Fatigue of Ti6Al4V in the Very High Cycle Fatigue Regime
Heinz, Stefan
Balle, Frank
Wagner, Guntram
Eifler, Dietmar
TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS PROPERTIES, CHARACTERIZATION, AND MODELING, 2012, : 831 - 838
[7] Fretting behaviors of a steel up to very high cycle fatigue
Teng, Zhenjie
Liu, Hanqing
Wang, Qingyuan
Huang, Zhiyong
Starke, Peter
WEAR, 2019, 438
[8] FRETTING AND FRETTING-FATIGUE IN METAL-TO-METAL CONTACTS
MILESTON.WD
MECHANICAL ENGINEERING, 1971, 93 (08) : 46 - &
[9] MICROSTRUCTURE AND FATIGUE BEHAVIOUR IN THE VERY HIGH CYCLE FATIGUE REGIME
Zimmermann, M.
Stoecker, C.
Christ, H. -J.
FATIGUE OF MATERIALS: ADVANCES AND EMERGENCES IN UNDERSTANDING, 2010, : 299 - 315
[10] High-frequency, high-temperature fretting-fatigue experiments
Matlik, J. F.
Farris, T. N.
Haake, F. K.
Swanson, G. R.
Duke, G. C.
WEAR, 2006, 261 (11-12) : 1367 - 1382

← 1 2 3 4 5 →