A 3D Printer Design and Fabrication for Chocolate

被引：0
|
作者：
Hosseini, Sahar [1 ]
Dehghani, Mohammad [1 ]
Zarafshan, Payam [2 ]
Azarikia, Fatemeh [1 ]
机构：
[1] Univ Tehran, Coll Aburaihan, Dept Food Technol, Tehran, Iran
[2] Univ Tehran, Fac New Sci & Technol, Dept Mech Engn, Tehran, Iran
来源：
2022 10TH RSI INTERNATIONAL CONFERENCE ON ROBOTICS AND MECHATRONICS (ICROM) | 2022年
关键词：
3D Printer; chocolate; fabrication; design; TEXTURAL PROPERTIES; OPTIMIZATION; MILK; FAT;
D O I：
10.1109/ICRoM57054.2022.10025079
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Recently, 3D printers have been introduced to the food industry and have attracted many attentions. In this paper, the design and fabrication of a 3D printer for chocolate is presented. First, some important properties of chocolate are introduced. Then, the design of the printer and its mechanical components are studied. Likewise, electrical components such as motors and sensors are introduced. After that, the device manufacturing process and troubleshooting steps are discussed. Experimental tests on the device are discussed. According to the results, the rheological properties of chocolate are modified by adding hydrocolloids and the final results are depicted. Finally, the device reaches a suitable performance for the production of 3D parts and is ready for production and research applications.
引用
收藏
页码：453 / 458
页数：6
相关论文
共 50 条
  • [21] RoMA: Interactive Fabrication with Augmented Reality and a Robotic 3D Printer
    Peng, Huaishu
    Briggs, Jimmy
    Wang, Cheng Yao
    Guo, Kevin
    Kider, Joseph
    Mueller, Stefanie
    Baudisch, Patrick
    Guimbretiere, Francois
    PROCEEDINGS OF THE 2018 CHI CONFERENCE ON HUMAN FACTORS IN COMPUTING SYSTEMS (CHI 2018), 2018,
  • [22] SOK: 3D Printer Firmware Attacks on Fused Filament Fabrication
    Rais, Muhammad Haris
    Ahsan, Muhammad
    Ahmed, Irfan
    PROCEEDINGS OF THE 18TH USENIX WOOT CONFERENCE ON OFFENSIVE TECHNOLOGIES, WOOT 2024, 2024, : 263 - 282
  • [23] Design and fabrication of aspheric Fresnel-type lenses for solar energy by using a 3D printer
    Jimenez-Rodriguez, Martin
    Avendano-Alejo, Maximino
    Ponce-Hernandez, Osvaldo
    Velazquez-Gomez, Ismael
    Izazaga-Perez, Rafael
    OPTICAL FABRICATION AND TESTING VIII, 2024, 13021
  • [24] Design and fabrication of 3D microprocessors
    Morrow, Patrick
    Black, Bryan
    Kobrinsky, Mauro J.
    Muthukumar, Sriram
    Nelson, Don
    Park, Chang-Min
    Webb, Clair
    ENABLING TECHNOLOGIES FOR 3-D INTEGRATION, 2007, 970 : 91 - +
  • [25] Design of 3D Printer and Development of Its Control System
    Hu, Jiabing
    Wu, Hao
    PROCEEDINGS OF THE 2017 7TH INTERNATIONAL CONFERENCE ON MECHATRONICS, COMPUTER AND EDUCATION INFORMATIONIZATION (MCEI 2017), 2017, 75 : 265 - 269
  • [26] Projection Optics Design for Projection Stereolithography 3D Printer
    Ehsan, Abang Annuar
    Rahim, Muhammad Syafiq
    Woei, Heng Cherng
    PROCEEDINGS OF THE 2019 IEEE REGIONAL SYMPOSIUM ON MICRO AND NANOELECTRONICS (RSM), 2019, : 160 - 163
  • [27] The Design of Wire Feeding Mechanism for Desktop 3D Printer
    Wang Haiyan
    Jiang Yunchun
    Song Aili
    Wang Na
    PROCEEDINGS OF THE 2018 8TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCE, ENGINEERING AND TECHNOLOGY (ICASET 2018), 2018, 159 : 151 - 155
  • [28] A Design of Constant Temperature Control System in 3D Printer
    Lin, Kuang-Hao
    Shen, Che-Ying
    Du, Jin-Lin
    Wang, Guo-Yi
    Chen, Hou-Ming
    Tseng, Jan-Dong
    2016 IEEE INTERNATIONAL CONFERENCE ON CONSUMER ELECTRONICS-TAIWAN (ICCE-TW), 2016, : 207 - 208
  • [29] A novel design to external filament extruder for 3D printer
    Nassar, Amal
    Nassar, Eman
    Younis, Mona
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2021, 19 (03) : 268 - 275
  • [30] 3D printer in action
    Keramische Zeitschrift, 2021, 73 (06) : 19 - 21
12345