Battery Management System-Balancing Modularization Based on a Single Switched Capacitor and Bi-Directional DC/DC Converter with the Auxiliary Battery

被引:47
|
作者
Daowd, Mohamed [1 ]
Antoine, Mailier [1 ]
Omar, Noshin [1 ]
Lataire, Philippe [1 ]
Van den Bossche, Peter [1 ]
Van Mierlo, Joeri [1 ]
机构
[1] Vrije Univ Brussel, Dept Elect Engn & Energy Technol, B-1050 Brussels, Belgium
关键词
battery management system (BMS); single switched capacitor (SSC); isolated bidirectional DC/DC converter (IBC); cell equalization; battery balancing; MATLAB/Simulink; LITHIUM-ION BATTERY; CHARGE EQUALIZATION; ENERGY-STORAGE; STATE; LIFE;
D O I
10.3390/en7052897
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Lithium-based batteries are considered as the most advanced batteries technology, which can be designed for high energy or high power storage systems. However, the battery cells are never fully identical due to the fabrication process, surrounding environment factors and differences between the cells tend to grow if no measures are taken. In order to have a high performance battery system, the battery cells should be continuously balanced for maintain the variation between the cells as small as possible. Without an appropriate balancing system, the individual cell voltages will differ over time and battery system capacity will decrease quickly. These issues will limit the electric range of the electric vehicle (EV) and some cells will undergo higher stress, whereby the cycle life of these cells will be shorter. Quite a lot of cell balancing/equalization topologies have been previously proposed. These balancing topologies can be categorized into passive and active balancing. Active topologies are categorized according to the active element used for storing the energy such as capacitor and/or inductive component as well as controlling switches or converters. This paper proposes an intelligent battery management system (BMS) including a battery pack charging and discharging control with a battery pack thermal management system. The BMS user input/output interfacing. The battery balancing system is based on battery pack modularization architecture. The proposed modularized balancing system has different equalization systems that operate inside and outside the modules. Innovative single switched capacitor (SSC) control strategy is proposed to balance between the battery cells in the module (inside module balancing, IMB). Novel utilization of isolated bidirectional DC/DC converter (IBC) is proposed to balance between the modules with the aid of the EV auxiliary battery (AB). Finally an experimental step-up has been implemented for the validation of the proposed balancing system.
引用
收藏
页码:2897 / 2937
页数:41
相关论文
共 50 条
  • [31] The Research on Bi-Directional DC/DC Converter for Hybrid Power System
    Liu, Guodong
    Ji, Zhipo
    Qiu, Ruichang
    Wang, Xiang
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ELECTRICAL AND INFORMATION TECHNOLOGIES FOR RAIL TRANSPORTATION (EITRT) 2017: ELECTRICAL TRACTION, 2018, 482 : 405 - 414
  • [32] Active Battery Balancing Via a Switched DC/DC Converter: Description and Performance Analysis
    Garcia Elvira, David
    Valderrama Blavi, Hugo
    Bosque Moncusi, Josep Maria
    Cid Pastor, Angel
    Garriga Castillo, Juan Antonio
    Martinez Salamero, Luis
    2019 16TH CONFERENCE ON ELECTRICAL MACHINES, DRIVES AND POWER SYSTEMS (ELMA), 2019,
  • [33] Single Switched Capacitor Battery Balancing System Enhancements
    Daowd, Mohamed
    Antoine, Mailier
    Omar, Noshin
    van den Bossche, Peter
    van Mierlo, Joeri
    ENERGIES, 2013, 6 (04) : 2149 - 2174
  • [34] Design and Control of a Bi-directional Resonant DC-DC Converter for Automotive Engine/Battery Hybrid Power Generators
    Park, Junsung
    Kwon, Minho
    Choi, Sewan
    2013 IEEE ECCE ASIA DOWNUNDER (ECCE ASIA), 2013, : 740 - 746
  • [35] Development of Switched-Capacitor Bi-directional DC-AC Converter for Inductive and Capacitive Loads
    Oota, Manami
    Terada, Shinya
    Eguchi, Kei
    Oota, Ichirou
    ISIE: 2009 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, 2009, : 1601 - +
  • [36] Bi-directional Multi-level Converter with DC Link Switches for Charging and Discharging Battery
    Han, Sang-Hyup
    Kim, Heung-Geun
    Cha, Honnyong
    Chun, Tae-Won
    Nho, Eui-Cheol
    2012 IEEE VEHICLE POWER AND PROPULSION CONFERENCE (VPPC), 2012, : 753 - 757
  • [37] Proposition and Experimental Verification of a Bi-Directional Isolated DC/DC Converter for Battery Charger-Discharger of Electric Vehicle
    Kondo, Ryota
    Higaki, Yusuke
    Yamada, Masaki
    APEC 2016 31ST ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, 2016, : 1713 - 1720
  • [38] V2G Bi-directional Battery Charger with Flexible AC/DC Converter
    Liu, Yaguang
    Zhong, Wenxing
    Weng, Haoyuan
    Li, Zheqing
    Chen, Min
    Hu, Changsheng
    Xu, Dehong
    2017 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2017, : 1439 - 1445
  • [39] A New High Efficiency Isolated Bi-Directional DC-DC Converter for DC-Bus and Battery-Bank Interface
    Yu, Xiaoyan
    Yeaman, Paul
    2014 TWENTY-NINTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC), 2014, : 879 - 883
  • [40] Lithium-Ion Cell Balancing Using Auxiliary Battery and DC/DC Unidirectional Converter
    Hashim, Muhammad Hazwan
    Jamaluddin, Mohd Saiful
    Hun, Mohd Hafidzuddin Sam
    Aziz, Mohd Junaidi Abdul
    Nordin, Norjulia Mohamad
    5TH IEEE CONFERENCE ON ENERGY CONVERSION 2021 (CENCON 2021), 2021, : 52 - 57