Photogrammetric Scanning Technique and Rapid Prototyping Used for Prostheses and Orthoses Fabrication

被引：5
|
作者：
Ciobanu, Octavian [1 ]
Ciobanu, Gabriela [2 ]
Rotariu, Mariana [1 ]
机构：
[1] Gr T Popa Univ Med & Pharm, Med Bioengn Fac, 9-13 Kogalniceanu St, Iasi 700454, Romania
[2] Gheorghe Asachi Tech Univ, Fac Chem Engn & Environm Protect, Iasi 700050, Romania
来源：
INNOVATIVE MANUFACTURING ENGINEERING | 2013年 / 371卷
关键词：
photogrammetric scanning; rapid prototyping; prostheses; orthoses;
D O I：
10.4028/www.scientific.net/AMM.371.230
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Paper approaches the feasibility of manufacturing of some types of prostheses and orthoses by using the photogrammetric scanning technique, 3D reconstruction of anatomic surfaces and Rapid Prototyping with 3D printers. Photogrammetric scanning appears to be the most cost effective technique but has some limitations in the reconstruction of anatomic surfaces. There are presented and discussed the processing steps used in the fabrication of a foot orthosis and of a prosthetic ear.
引用
收藏
页码：230 / +
页数：2
相关论文
共 50 条
  • [1] Rapid prototyping of ossicular replacement prostheses
    Ovsianikov, A.
    Chichkov, B.
    Adunka, O.
    Pillsbury, H.
    Doraiswamy, A.
    Narayan, R. J.
    APPLIED SURFACE SCIENCE, 2007, 253 (15) : 6603 - 6607
  • [2] A rapid prototyping technique for the fabrication of solvent-resistant structures
    Harrison, C
    Cabral, JT
    Stafford, CM
    Karim, A
    Amis, EJ
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2004, 14 (01) : 153 - 158
  • [3] A comparison of rapid prototyping techniques used for wind tunnel model fabrication
    Chuk, Raymond N.
    Thomson, Vincent J.
    RAPID PROTOTYPING JOURNAL, 1998, 4 (04) : 185 - 196
  • [4] Fabrication of an Auricular Prosthesis Using Computed Tomography and Rapid Prototyping Technique
    Karayazgan-Saracoglu, Banu
    Gunay, Yumushan
    Atay, Arzu
    JOURNAL OF CRANIOFACIAL SURGERY, 2009, 20 (04) : 1169 - 1172
  • [5] Using Reverse Engineering and Rapid Prototyping for Patient Specific Orthoses
    Kudelski, Rafal
    Dudek, Piotr
    Kulpa, Mykola
    Rumin, Rafal
    2017 XIIITH INTERNATIONAL CONFERENCE ON PERSPECTIVE TECHNOLOGIES AND METHODS IN MEMS DESIGN (MEMSTECH), 2017, : 88 - 90
  • [6] Simple fabrication technique for rapid prototyping of seamless cylindrical microchannels in polymer substrates
    Perry, Hannah
    Greiner, Cherry
    Georgakoudi, Irene
    Cronin-Golomb, Mark
    Omenetto, Fiorenzo G.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2007, 78 (04):
  • [7] Rapid freeze prototyping technique in bio-plotters for tissue scaffold fabrication
    Pham, Cong Bang
    Leong, Kah Fai
    Lim, Tze Chiun
    Chian, Kerm Sin
    RAPID PROTOTYPING JOURNAL, 2008, 14 (04) : 246 - 253
  • [8] Positional correction algorithm of a laser galvanometric scanning system used in rapid prototyping manufacturing
    Jun Xie
    Shuhuai Huang
    Zhengcheng Duan
    The International Journal of Advanced Manufacturing Technology, 2005, 26 : 1348 - 1352
  • [9] Positional correction algorithm of a laser galvanometric scanning system used in rapid prototyping manufacturing
    Xie, J
    Huang, SH
    Duan, ZC
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 26 (11-12): : 1348 - 1352
  • [10] Patient specific ankle-foot orthoses using rapid prototyping
    Constantinos Mavroidis
    Richard G Ranky
    Mark L Sivak
    Benjamin L Patritti
    Joseph DiPisa
    Alyssa Caddle
    Kara Gilhooly
    Lauren Govoni
    Seth Sivak
    Michael Lancia
    Robert Drillio
    Paolo Bonato
    Journal of NeuroEngineering and Rehabilitation, 8
12345