The performance of TiN coated carbide tools when turning AISI 8620 steel

被引：6
|
作者：
de Avila, Renato Francoso
Abrao, Alexandre Mendes
Duraes de Godoy, G. Cristina
机构：
[1] Univ Fed Minas Gerais, Dept Mech Engn, BR-31270901 Belo Horizonte, MG, Brazil
[2] Univ Fed Minas Gerais, Dept Met Engn, BR-30160030 Belo Horizonte, MG, Brazil
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2006年 / 179卷 / 1-3期
关键词：
crater wear volume; turning; topographic analysis; coatings;
D O I：
10.1016/j.jmatprotec.2006.03.066
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This work is concerned with the performance of uncoated and coated carbide tools (ISO grade K10) with a 3 mu m thick monolayer of TiN (produced by PAPVD) when continuous turning AISI 8620 steel. For this purpose a topographic analysis was employed to assess the crater wear volume evolution. This methodology is considered a more realistic alternative to study crater wear when compared to the bi-dimensional parameters established by ISO 3685/93. The tests were carried out under typical machining conditions. The results indicated that two distinct crater wear rates are present when machining using coated cutting tools, whereas a higher and single wear rate was identified for the uncoated inserts. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：161 / 164
页数：4
相关论文
共 50 条
  • [31] An evaluation of heat partition in the high-speed turning of AISI/SAE 4140 steel with uncoated and TiN-coated tools
    Akbar, F.
    Mativenga, P. T.
    Sheikh, M. A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2008, 222 (07) : 759 - 771
  • [32] Effects of cryogenic treatment types on the performance of coated tungsten tools in the turning of AISI H11 steel
    Ozbek, Nursel Altan
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 9442 - 9456
  • [33] The characteristics of CVD- and PVD-coated carbide tools in hard turning of AISI 4340
    Ginting, A.
    Skein, R.
    Cuaca, D.
    Herdianto
    Pieter
    Masyithah, Z.
    MEASUREMENT, 2018, 129 : 548 - 557
  • [34] Performance of coated and uncoated carbide/cermet cutting tools during turning
    Ulas, Hasan Basri
    Bilgin, Musa
    Sezer, Huseyin Kursad
    Ozkan, Murat Tolga
    MATERIALS TESTING, 2018, 60 (09) : 893 - 901
  • [35] Tool wear in finish turning of medium carbon steel with coated carbide tools
    Ezugwu, EO
    LUBRICATION ENGINEERING, 1997, 53 (11): : 25 - 31
  • [36] PERFORMANCE ANALYSIS OF AISI 4340 HARDENED STEEL IN DUAL JET MQL TURNING SYSTEM: A COMPARISON STUDY BETWEEN CVD AND PVD-COATED CARBIDE TOOLS
    Bag, Rabinarayan
    Panda, Amlana
    Sahoo, Ashok Kumar
    Kumar, Ramanuj
    SURFACE REVIEW AND LETTERS, 2024,
  • [37] Performance of Multilayered PVD Coated Cemented Carbide Inserts during Dry Turning of AISI 304 Austenitic Stainless Steel
    Kulkarni, Atul P.
    Sargade, Vikas G.
    CENTURY OF STAINLESS STEELS, 2013, 794 : 248 - 254
  • [38] Tool wear and surface roughness in turning AISI 8620 using coated ceramic tool
    Thamizhmanii, S.
    Kamarudin, K.
    Rahim, E. A.
    Saparudin, A.
    Hassan, S.
    WORLD CONGRESS ON ENGINEERING 2007, VOLS 1 AND 2, 2007, : 1157 - +
  • [39] Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool
    Suresh, R.
    Basavarajappa, S.
    Samuel, G. L.
    MEASUREMENT, 2012, 45 (07) : 1872 - 1884
  • [40] Wear analysis of ultra-fine grain coated carbide tools in hard turning of AISI 420C stainless steel
    Rosa, Guilherme C.
    Souza, Andre J.
    Possamai, Elizeu V.
    Amorim, Heraldo J.
    Neis, Patric D.
    WEAR, 2017, 376 : 172 - 177
12345