TEM study of Ti-N and Cr-N precipitate formation in iron alloys

被引:0
|
作者
Chechenin, NG
Bronsveld, PM
Chezan, A
Craus, CB
Boerma, DO
De Hosson, JTM
Niesen, L
机构
[1] Univ Groningen, Ctr Mat Sci, NL-9747 AG Groningen, Netherlands
[2] Moscow MV Lomonosov State Univ, Inst Nucl Phys, Moscow 119899, Russia
关键词
D O I
10.1002/(SICI)1521-396X(200001)177:1<117::AID-PSSA117>3.0.CO;2-4
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The formation of precipitates of Ti and Cr nitrides in cold-rolled Fe + Ni(4at%) Ti(2at%) and Fe + Ni(4at%) + Cr(3at%) after a pre-nitriding step was investigated by Mossbauer spectroscopy (MS) and transmission electron microscopy (TEM). From MS data we conclude that initially most of the Ti and Cr were atomically dispersed. Using TEM and high-resolution TEM (HRTEM), we found that the Baker-Nutting (B-N) orientation relationship (OR) holds for platelets one to two interatomic distances thick, producing streaking around the (200) reflections, while for thicker precipitates the Nishiyama-Wasserman (N-W) OR is more favorable. We also observed a transient phase, Cr2N, the formation of which was possible due to the relatively low nitriding temperature, a low nitriding potential, and the presence of Cr inclusions of relatively large initial size.
引用
收藏
页码:117 / 125
页数:9
相关论文
共 50 条
  • [41] Erosion of vacuum-arc Ti-N coatings
    Marynin, VH
    MATERIALS SCIENCE, 2003, 39 (03) : 447 - 451
  • [42] Microstructure and indentation behaviour of multilayer Ti-N film
    Wagendristel, A.
    Huang, Rongfang
    Bangert, H.
    Yang, Xia
    Wu, Lihang
    Wang, Haifeng
    Pangratz, H.
    Skalicky, P.
    Acta Metallurgica Sinica Series B, Process Metallurgy & Miscellaneous, 1993, 6 B (01): : 29 - 34
  • [43] Critical assessment and thermodynamic modeling of the Ti-N system
    Zeng, KJ
    SchmidFetzer, R
    ZEITSCHRIFT FUR METALLKUNDE, 1996, 87 (07): : 540 - 554
  • [44] On the mechanisms of the formation of nanocrystalline Cr-N and V-N coatings upon ion-beam-assisted deposition
    A. G. Guglya
    The Physics of Metals and Metallography, 2010, 109 : 67 - 76
  • [45] X-RAY STUDIES OF TI-N COATINGS
    ZHANG, N
    ZHAI, W
    WANG, Y
    WAGENDRISTEL, A
    VACUUM, 1993, 44 (01) : 51 - 53
  • [46] On the Mechanisms of the Formation of Nanocrystalline Cr-N and V-N Coatings upon Ion-Beam-Assisted Deposition
    Guglya, A. G.
    PHYSICS OF METALS AND METALLOGRAPHY, 2010, 109 (01): : 67 - 76
  • [47] Ti-N, Ti-C-N, Ti-Si-N coatings obtained by APCVD at 650-800 °C
    Kuo, DH
    Liao, WC
    APPLIED SURFACE SCIENCE, 2002, 199 (1-4) : 278 - 286
  • [48] Interatomic potentials for Cr-N solid solutions, hexagonal Cr2N, and cubic CrN
    Pokropivnyi, VV
    Ogorodnikov, VV
    INORGANIC MATERIALS, 1996, 32 (03) : 287 - 291
  • [49] Mechanical and tribological properties of Cr-N and Cr-SI-N coatings reactively sputter deposited
    Mercs, D
    Bonasso, N
    Naamane, S
    Bordes, JM
    Coddet, C
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (1-4): : 403 - 407
  • [50] Molecular dynamics simulation of Cr-N clusters formation in high nitrogen austenitic stainless steel
    Liu, Lei
    Wang, Guocheng
    Xiao, Yuanyou
    Zhao, Zhuo
    Yang, Zhanbing
    SCRIPTA MATERIALIA, 2023, 227