Determination of threshold stress intensity factor for stress corrosion cracking (KISCC) of steel heat affected zone

被引：20
|
作者：
Pal, Sarvesh [1 ]
Raman, R. K. Singh [1 ,2 ]
机构：
[1] Monash Univ, Dept Mech & Aerosp Engn, Clayton, Vic 3800, Australia
[2] Monash Univ, Dept Chem Engn, Clayton, Vic 3800, Australia
来源：
CORROSION SCIENCE | 2009年 / 51卷 / 10期
基金：
澳大利亚研究理事会;
关键词：
Steel; Stress corrosion; FRACTURE-TOUGHNESS; CYLINDRICAL SPECIMENS; MILD-STEEL; CAST-IRON; TESTS;
D O I：
10.1016/j.corsci.2009.06.032
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Threshold stress intensity factor for stress corrosion cracking of heat affected zone (HAZ) of mild steel in caustic solution has been determined using circumferential notch tensile (CNT) technique. HAZ microstructure produced during manual metal arc welding of grade 250 steel was simulated over a length of 35 mm of CNT specimens, using a thermo-mechanical simulator. Inter-granular stress corrosion cracking has been confirmed with scanning electron microscope. The results presented here validate the ability of CNT technique for determination of K-ISCC of HAZ and base metal. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2443 / 2449
页数：7
相关论文
共 50 条
  • [21] THE INFLUENCE OF THE STRESS INTENSITY FACTOR ON THE FRACTOGRAPHY OF STRESS-CORROSION CRACKING OF 316 STAINLESS-STEEL
    LI, SQ
    DICKSON, JI
    BAILON, JP
    TROMANS, D
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1989, 119 : 59 - 72
  • [22] Circumventing Practical Difficulties in Determination of Threshold Stress Intensity for Stress Corrosion Cracking of Narrow Regions of Welded Structures
    Sarvesh Pal
    R. K. Singh Raman
    R. Rihan
    Metallurgical and Materials Transactions A, 2012, 43 : 3202 - 3214
  • [23] Circumventing Practical Difficulties in Determination of Threshold Stress Intensity for Stress Corrosion Cracking of Narrow Regions of Welded Structures
    Pal, Sarvesh
    Raman, R. K. Singh
    Rihan, R.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (09): : 3202 - 3214
  • [24] Prediction of threshold stress intensity factor for hydrogen induced intergranular cracking of tubular steel
    Qiao, LJ
    Chu, WY
    Luo, JL
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 276 (1-2): : 141 - 146
  • [25] STANDARD TEST PROCEDURE FOR STRESS-CORROSION CRACKING THRESHOLD STRESS DETERMINATION
    BEAVERS, JA
    BERRY, WE
    PARKINS, RN
    MATERIALS PERFORMANCE, 1986, 25 (06) : 9 - 17
  • [26] STRESS CORROSION CRACKING AND ITS MECHANISM OF 16Mn STEEL AND HEAT-AFFECTED ZONE IN ALKALINE SULFIDE SOLUTIONS
    Hao Wenkui
    Liu Zhiyong
    Li Xiaogang
    Du Cuiwei
    ACTA METALLURGICA SINICA, 2013, 49 (07) : 881 - 889
  • [27] Stress corrosion cracking in the heat-affected zone of A508 steel welds under high-temperature water
    Chung, Wei-Chih
    Huang, Jiunn-Yuan
    Tsay, Leu-Wen
    Chen, Chun
    JOURNAL OF NUCLEAR MATERIALS, 2011, 408 (01) : 125 - 128
  • [28] Case Study: Pitting and Stress Corrosion Cracking in Heat-Affected Zone of Welded Underground 304 Stainless Steel Pipe
    Tawancy, H. M.
    Al-Hadhrami, Luai M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (08) : 1757 - 1762
  • [29] Case Study: Pitting and Stress Corrosion Cracking in Heat-Affected Zone of Welded Underground 304 Stainless Steel Pipe
    H. M. Tawancy
    Luai. M. Al-Hadhrami
    Journal of Materials Engineering and Performance, 2012, 21 : 1757 - 1762
  • [30] Pitting Corrosion and Stress Corrosion Cracking around Heat Affected Zone in Welded Joint of CrNiMoV Rotor Steel in Chloridized High Temperature Water
    Luo, L. H.
    Huang, Y. H.
    Xuan, F. Z.
    PRESSURE VESSEL TECHNOLOGY: PREPARING FOR THE FUTURE, 2015, 130 : 1190 - 1198
12345