Determination of threshold stress intensity factor for stress corrosion cracking (KISCC) of steel heat affected zone

被引：20

作者：

Pal, Sarvesh ^{[1
]}

Raman, R. K. Singh ^{[1
,2
]}

机构：

[1] Monash Univ, Dept Mech & Aerosp Engn, Clayton, Vic 3800, Australia

[2] Monash Univ, Dept Chem Engn, Clayton, Vic 3800, Australia

来源：

CORROSION SCIENCE | 2009年 / 51卷 / 10期

基金：

澳大利亚研究理事会;

关键词：

Steel; Stress corrosion; FRACTURE-TOUGHNESS; CYLINDRICAL SPECIMENS; MILD-STEEL; CAST-IRON; TESTS;

D O I：

10.1016/j.corsci.2009.06.032

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Threshold stress intensity factor for stress corrosion cracking of heat affected zone (HAZ) of mild steel in caustic solution has been determined using circumferential notch tensile (CNT) technique. HAZ microstructure produced during manual metal arc welding of grade 250 steel was simulated over a length of 35 mm of CNT specimens, using a thermo-mechanical simulator. Inter-granular stress corrosion cracking has been confirmed with scanning electron microscope. The results presented here validate the ability of CNT technique for determination of K-ISCC of HAZ and base metal. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：2443 / 2449

页数：7

共 50 条

[1] A Simple Approach to the Determination of Threshold Stress Intensity for Stress Corrosion Cracking (KISCC) and Crack Growth of Sensitized Austenitic Stainless Steel
R. K. Singh Raman
Sarvesh Pal
Metallurgical and Materials Transactions A, 2011, 42 : 2643 - 2651
[2] Threshold stress intensity factor and crack growth rate for stress corrosion cracking of simulated heat affected zone in caustic solution
Pal, Sarvesh
Ibrahim, R. N.
Raman, R. K. Singh
ENGINEERING FRACTURE MECHANICS, 2011, 78 (01) : 13 - 26
[3] Threshold stress intensity for stress corrosion cracking (KISCC) of a magnesium alloy in physiological environment
Choudhary, Lokesh
Raman, R. K. Singh
LIGHT METALS TECHNOLOGY V, 2011, 690 : 487 - 490
[4] Validation of a novel approach to determination of threshold for stress corrosion cracking (KISCC)
Raman, R. K. Singh
Rihan, R.
Ibrahim, R. N.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 452 (652-656): : 652 - 656
[5] Validity of a new fracture mechanics technique for the determination of the threshold stress intensity factor for stress corrosion cracking (KIscc) and crack growth rate of engineering materials
Ibrahim, R. N.
Rihan, R.
Raman, R. K. Singh
ENGINEERING FRACTURE MECHANICS, 2008, 75 (06) : 1623 - 1634
[6] DETERMINATION OF THE CRITICAL STRESS INTENSITY FACTOR IN CORROSION CRACKING (KISCC) USING THE ACOUSTIC-EMISSION METHOD
DRUCHENKO, VA
OKON, IL
MARCHENKO, VK
PROTECTION OF METALS, 1987, 23 (03): : 393 - 395
[7] STANDARD TEST METHOD FOR THRESHOLD STRESS INTENSITY FACTOR KISCC IN STRESS-CORROSION CRACKING - JS']JSPS 129 COMMITTEE RECOMMENDATION
AOKI, T
IWADATE, T
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (16): : 2204 - 2207
[8] DIFFERENCE BETWEEN THRESHOLD STRESS INTENSITY KISCC FOR STRESS CORROSION CRACKING FOR DECREASING AND INCREASING K LOADING MODES.
Smith, E.
Res Mechanica: International Journal of Structural Mechanics and Materials Science, 1983, 9 (04): : 237 - 247
[9] DIFFERENCE BETWEEN THRESHOLD STRESS INTENSITY KISCC FOR STRESS-CORROSION CRACKING FOR DECREASING AND INCREASING K LOADING MODES
SMITH, E
RES MECHANICA, 1983, 9 (04): : 237 - 247
[10] A novel approach to the determination of the threshold for stress corrosion cracking (KISCC) using round tensile specimens
Singh Raman R.K.
Rihan R.
Ibrahim R.N.
Metallurgical and Materials Transactions A, 2006, 37 (10) : 2963 - 2973

← 1 2 3 4 5 →