The effect of micro pore on the characteristics of crack tip plastic zone in concrete

被引：43

作者：

Haeri, Hadi ^{[1
]}

Sarfarazi, V. ^{[2
]}

机构：

[1] Islamic Azad Univ, Bafgh Branch, Dept Min Engn, Bafgh, Iran

[2] Hamedan Univ Technol, Dept Min Engn, Hamadan, Iran

来源：

COMPUTERS AND CONCRETE | 2016年 / 17卷 / 01期

关键词：

crack; micro pore; crack tip plastic zone; crack growth properties; FEM; I FRACTURE-TOUGHNESS; DEFORMATION; SIMULATION; INITIATION; BEHAVIOR;

D O I：

10.12989/cac.2016.17.1.107

中图分类号：

TP39 [计算机的应用];

学科分类号：

081203 ; 0835 ;

摘要：

Concrete is a heterogeneous material containing many weaknesses such as micro-cracks, pores and grain boundaries. The crack growth mechanism and failure behavior of concrete structures depend on the plastic deformation created by these weaknesses. In this article the non-linear finite element method is used to analyze the effect of presence of micro pore near a crack tip on both of the characteristics of crack tip plastic zone (its shape and size) and crack growth properties (such as crack growth length and crack initiation angle) under pure shear loading. The FE Code Franc2D/L is used to carry out these objectives. The effects of the crack-pore configurations and the spacing between micro pore and pre-excising crack tip on the characteristics of crack tip plastic zone and crack growth properties is highlighted. Based on the obtained results, the relative distance between the crack tip and the micro pore affects in very significant way the shape and the size of the crack tip plastic zone. Furthermore, crack growth length and crack initiation angle are mostly influenced by size and shape of plastic zone ahead of crack tip. Also the effects of pore decrease on the crack tip by variation of pore situation from linear to perpendicular configuration. The critical position for a micro pore is in front of the crack tip.

引用

页码：107 / 127

页数：21

共 50 条

[21] On the Plastic Zone around a Crack Tip in a Rock Specimen
Ai, T.
Wu, C. H.
Zhang, R.
Xiang, Z. Y.
Yuan, Y. Y.
Wang, S. Y.
PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ELECTRONIC & MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY (EMEIT-2012), 2012, 23
[22] STUDY OF CRACK TIP PLASTIC ZONE TOPOGRAPHY IN BERYLLIUM
COOPER, RE
JOURNAL OF TESTING AND EVALUATION, 1975, 3 (02) : 87 - 92
[23] The shielding effects of the crack-tip plastic zone
P. Zhu
L. Yang
Z. Li
J. Sun
International Journal of Fracture, 2010, 161 : 131 - 139
[24] Experimental evaluation of the plastic zone at crack tip by caustics
Badalouka, B.G.
Papadopoulos, G.A.
Open Mechanical Engineering Journal, 2012, 6 (01): : 83 - 89
[25] Limiting State of Pipelines and Plastic Zone at the Crack Tip
Ostsemin A.A.
Russian Engineering Research, 2011, 31 (2) : 128 - 132
[26] The shielding effects of the crack-tip plastic zone
Zhu, P.
Yang, L.
Li, Z.
Sun, J.
INTERNATIONAL JOURNAL OF FRACTURE, 2010, 161 (02) : 131 - 139
[27] THERMAL-PROPERTIES OF A CRACK TIP PLASTIC ZONE
KNESL, Z
KUNA, M
BILEK, Z
SCHMIDT, V
CZECHOSLOVAK JOURNAL OF PHYSICS, 1979, 29 (07) : 825 - 828
[28] Assessment of crack tip plastic zone size and shape and its influence on crack tip shielding
Vasco-Olmo, J. M.
James, M. N.
Christopher, C. J.
Patterson, E. A.
Diaz, F. A.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2016, 39 (08) : 969 - 981
[29] Effect of low cycle fatigue loading on the crack tip plastic zone of high cycle fatigue crack
Liu H.-W.
Wang R.-Q.
Hu D.-Y.
1600, Beijing University of Aeronautics and Astronautics (BUAA) (31): : 2339 - 2345
[30] EFFECT OF GRAIN SIZE ON THE SLOW FATIGUE CRACK PROPAGATION AND THE PLASTIC DEFORMATION ZONE OF A CRACK TIP.
Deng, Rongying
Yu, Guiqing
Li, He
Jinshu Xuebao/Acta Metallurgica Sinica, 1986, 22 (05):

← 1 2 3 4 5 →