Feasibility study on preparation of coatings on Ti-6Al-4V by combined ultrasonic impact treatment and electrospark deposition

被引：29
|
作者：
Liu, Yang [1 ]
Wang, Dongpo [1 ]
Deng, Caiyan [1 ]
Huo, Lixing [1 ]
Wang, Lijun [1 ]
Cao, Shu [1 ]
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin Key Lab Adv Joining Technol, Tianjin 300072, Peoples R China
来源：
MATERIALS & DESIGN | 2014年 / 63卷
基金：
中国国家自然科学基金;
关键词：
Coating; Ultrasonic impact treatment; Electrospark processing; Amorphous phase; Residual stress; Wear; PEENING TREATMENT; WELDED-JOINTS; RESIDUAL-STRESSES; FATIGUE BEHAVIOR; OXIDE COATINGS; WEAR;
D O I：
10.1016/j.matdes.2014.06.061
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A novel method combining ultrasonic impact treatment (UIT) with electrospark deposition was developed to prepare coatings on Ti-6Al-4V substrates. The microstructure, phase composition, residual stress, microhardness, and wear performance of the coating were studied, and new amorphous and nanocrystalline phases (titanium carbide nitride and iron titanium oxide) were found. In addition, the residual stress in the coating and in the substrate near the coating is compressive stress. The maximum compressive residual stress is about - 717 MPa, and its depth is about 470 mu m. Because of contributions from multiple factors, the wear volume loss of the sample subjected to combined UIT and electrospark processing was reduced by four orders of magnitude compared with that of the base material. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：488 / 492
页数：5
相关论文
共 50 条
  • [21] Ultrasonic Assessment of Additive Manufactured Ti-6Al-4V
    Schehl, Norman
    Kramb, Vicki
    Dierken, Josiah
    Aldrin, John
    Schwalbach, Edwin
    John, Reji
    44TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 37, 2018, 1949
  • [22] BOUND METAL DEPOSITION OF Ti-6Al-4V ALLOY
    Tuncer, Nihan
    Reidy, John P.
    Jorgensen, Luke
    Bose, Animesh
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 2024, 60 (01):
  • [23] Surface modification of 3 D-printed alloy Ti-6Al-4V by ultrasonic impact treatment
    Voloshko, S. M.
    Mordyuk, B. M.
    Vasylyev, M. O.
    Zakiev, V. I.
    Burmak, A. P.
    Franchik, N. V.
    METALLOPHYSICS AND ADVANCED TECHNOLOGIES, 2023, 45 (02) : 217 - 237
  • [24] Surface Modification of EBF3-Fabricated Ti-6Al-4V Parts by Ultrasonic Impact Treatment
    Panin, Alexey
    Kazachenok, Marina
    Perevalova, Olga
    Kolmakov, Alexey
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
  • [25] Formation of adherent polypyrrole coatings on Ti and Ti-6Al-4V alloy
    Earley, ST
    Dowling, DP
    Lowry, JP
    Breslin, CB
    SYNTHETIC METALS, 2005, 148 (02) : 111 - 118
  • [26] A SURFACE-TREATMENT FOR TI-6AL-4V
    SMITH, T
    JOURNAL OF ADHESION, 1983, 15 (02): : 137 - 149
  • [27] Electrospark Deposition of Ti-Ta Coatings on Ti6Al4V Titanium Alloy: Oxidation Resistance and Wear Properties
    Burkov, A. A.
    Nikolenko, S. V.
    Krutikova, V. O.
    Shelmenok, N. A.
    PHYSICAL MESOMECHANICS, 2024, 27 (05) : 618 - 626
  • [28] Deposition of Ti–Ni–Zr–Mo–Al–C Composite Coatings on the Ti6Al4V Alloy by Electrospark Alloying in a Granule Medium
    Burkov A.A.
    Zaikova E.R.
    Dvornik M.I.
    Surface Engineering and Applied Electrochemistry, 2018, 54 (6) : 546 - 554
  • [29] Study on surface properties of Ti-6Al-4V titanium alloy by ultrasonic rolling
    Ren, Zhaohui
    Li, Zhuhong
    Zhou, Shihua
    Wang, Yunhe
    Zhang, Lu
    Zhang, Ziting
    SIMULATION MODELLING PRACTICE AND THEORY, 2022, 121
  • [30] A study on strengthening and machining integrated ultrasonic peening drilling of Ti-6Al-4V
    Liu, Yihang
    Geng, Daxi
    Shao, Zhenyu
    Zhou, Zehua
    Jiang, Xinggang
    Zhang, Deyuan
    MATERIALS & DESIGN, 2021, 212
12345