Pulsed Electric Current Bonding of Tungsten to Titanium

被引：0
|
作者：
Kobuchi, Keisuke [1 ]
Nishimoto, Akio [2 ]
机构：
[1] Kansai Univ, Grad Sch Sci & Engn, 3-3-35 Yamate Cho, Suita, Osaka 5648680, Japan
[2] Kansai Univ, Dept Chem & Mat Engn, Osaka 5648680, Japan
来源：
METALLOGRAPHY XV | 2014年 / 782卷
关键词：
pulsed electric current sintering; spark plasma sintering; bonding; tungsten; titanium; AUSTENITIC STAINLESS-STEEL; MICROSTRUCTURE; COATINGS;
D O I：
10.4028/www.scientific.net/MSF.782.445
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Pulsed electric-current sintering was applied to the bonding of tungsten to titanium. The influence of bonding condition on the bond strength of joint was investigated by observing the microstructure. The bonding process was carried out at bonding temperature from 773 to 1273 K for 1.8 ks at a bonding pressure of 40 MPa. The bond strength of the joint bonded at the temperature higher than 1173 K was around 200 MPa. This joint fractured in the tungsten during tensile test. SEM-EDX observation revealed that W diffused into Ti at the joint interface of the joint bonded at the temperature higher than 973 K.
引用
收藏
页码：445 / +
页数：2
相关论文
共 50 条
  • [1] Pulsed electric current bonding of tungsten to copper with intermediate layer
    Nishimoto, Akio
    Akamatsu, Katsuya
    DESIGNING OF INTERFACIAL STRUCTURES IN ADVANCED MATERIALS AND THEIR JOINTS, 2007, 127 : 289 - +
  • [2] Effect of electric current wave on joints in pulsed electric current bonding
    Chikui, N
    Furuhata, H
    Wada, K
    Ohashi, O
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2006, 70 (02) : 146 - 149
  • [3] ELECTRIC DEPOSITION OF ALLOYS WITH TITANIUM BY A PULSED CURRENT.
    Groza, I.A.
    Parsadanyan, A.S.
    Karcha, A.G.
    Spynu, V.K.
    Petrov, P.I.
    Rybalko, A.V.
    Soviet surface engineering and applied electrochemistry, 1986, (02): : 44 - 48
  • [4] Guidelines for using pulsed electric current bonding on stainless steel
    Chikui, N
    Furuhata, H
    Yamaguchi, N
    Ohashi, O
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2005, 69 (08) : 715 - 718
  • [5] Microstructure of SiC/Cu interface by pulsed electric-current bonding
    Nishimoto, Akio
    Akamatsu, Katsuya
    Ikeuchi, Kenji
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 3883 - +
  • [6] Behavior of powder as interlayer materials of joints in pulsed electric current bonding
    Niigata College of Technology, 5-13-7 Kamishin'ei-cho, Nishi-ku, Niigata 950-2076, Japan
    不详
    不详
    不详
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2008, 55 (06): : 401 - 407
  • [7] Application of pulsed electric-current sintering technique to interfacial bonding
    Saida, Kazuyuki
    Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2002, 71 (03): : 30 - 34
  • [8] Binder-free tungsten carbide fabricated by pulsed electric current sinterirng
    Shimojima, K.
    Hosokawa, H.
    Nakajima, T.
    Mizukami
    Yamamoto, Y.
    PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 1153 - +
  • [9] Turbulence of pulsed current in tungsten
    Rinkevich, AB
    FIZIKA METALLOV I METALLOVEDENIE, 1998, 85 (05): : 32 - 42
  • [10] Pulsed electric-current bonding of SiC to Cu with Ti intermediate layer
    Nishimoto, A
    Nakao, K
    Akamatsu, K
    Ikeuchi, K
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2003, 67 (09) : 432 - 435
12345