Evolution of precipitation during different homogenization treatments in a 3003 aluminum alloy

被引：69
|
作者：
Huang, Hsin-Wen [1 ]
Ou, Bin-Lung [1 ]
机构：
[1] Natl Cent Univ, Dept Mech Engn, Chungli 320, Taiwan
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 07期
关键词：
CAST AA3003 ALLOY; RECRYSTALLIZATION; PARTICLES; BEHAVIOR;
D O I：
10.1016/j.matdes.2008.10.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The evolution of the precipitation of second phase particles dispersed in a DC cast 3003 aluminum alloy during different homogenization treatments was investigated. Fight kinds of homogenization conditions were designed. We conclude that the evolution of precipitated dispersed particles during homogenization is controlled by nucleation, growth, Ostwald ripening process and hetero-precipitation. Nucleation of the particles would occur first during the initial phase of homogenization. They would then undergo a process of growth, dissolution and coarsening, before reaching the final state of precipitation. Two-color particles usually appear at step-homogenization, which has a lower later temperature, 600 degrees C x 9 h -> 460 degrees C x 3 h, due to a hetero-precipitation behavior. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2685 / 2692
页数：8
相关论文
共 50 条
  • [31] Evolution of Grain Boundary Phases during the Homogenization of AA7020 Aluminum Alloy
    Eivani, A. R.
    Ahmed, H.
    Zhou, J.
    Duszczyk, J.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (03): : 717 - 728
  • [32] Evolution of Grain Boundary Phases during the Homogenization of AA7020 Aluminum Alloy
    A.R. Eivani
    H. Ahmed
    J. Zhou
    J. Duszczyk
    Metallurgical and Materials Transactions A, 2009, 40 : 717 - 728
  • [33] Precipitation and recrystallization of AA3003 aluminium alloy during annealing
    School of Materials Science and Engineering, Central South University, Changsha 410083, China
    Zhongnan Daxue Xuebao (Ziran Kexue Ban), 2006, 1 (1-5):
  • [34] Effect of homogenization and precipitation treatments on the extrudability and ambient-temperature mechanical properties of aluminum alloy AA2024
    Kassner, M.E.
    Li, X.
    McQueen, H.J.
    Materials Science and Engineering A, 1993, A169 (1-2) : 9 - 17
  • [35] An investigation on the coating of 3003 aluminum alloy
    Luan, B
    Le, T
    Nagata, J
    SURFACE & COATINGS TECHNOLOGY, 2004, 186 (03): : 431 - 443
  • [36] Precipitation behavior and properties of extruded7136 aluminum alloy under different aging treatments
    Huiyan LI
    Lina JIA
    Jiangnan HUANG
    Yue MA
    Chinese Journal of Aeronautics, 2021, 34 (02) : 612 - 619
  • [37] Effects of microstructure, texture evolution and strengthening mechanisms on mechanical properties of 3003 aluminum alloy during cryogenic rolling
    Yang, Q.Y.
    Zhou, Y.L.
    Tan, Y.B.
    Xiang, S.
    Ma, M.
    Zhao, F.
    Tan, Y.B. (ybtan1@gzu.edu.cn), 1600, Elsevier Ltd (884):
  • [38] Effects of microstructure, texture evolution and strengthening mechanisms on mechanical properties of 3003 aluminum alloy during cryogenic rolling
    Yang, Q. Y.
    Zhou, Y. L.
    Tan, Y. B.
    Xiang, S.
    Ma, M.
    Zhao, F.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 884
  • [39] Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082
    Arnoldt, Aurel Ramon
    Schiffl, Andreas
    Hoeppel, Heinz Werner
    Osterreicher, Johannes Albert
    MATERIALS CHARACTERIZATION, 2022, 191
  • [40] Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082
    Arnoldt, Aurel Ramon
    Schiffl, Andreas
    Hoppel, Heinz Werner
    Oesterreicher, Johannes Albert
    MATERIALS CHARACTERIZATION, 2022, 191
12345