INFLUENCE OF SEGREGATION PROCESSES ON SOLIDIFICATION TEMPERATURE OF STEELS

被引:0
|
作者
Dobrovska, Jana [1 ]
Smetana, Bedrich [1 ]
Dobrovska, Vera [1 ]
Stransky, Karel [2 ]
Francova, Hana [1 ]
Zaludova, Monika [1 ]
机构
[1] VSB Tech Univ Ostrava, Ostrava, Czech Republic
[2] Brno Univ Technol, Brno, Czech Republic
关键词
Solidification temperature; microsegregation; solidus temperature; liquidus temperature;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper deals with the possibility of prediction of solidification temperature of steel on the base of the description of (micro) segregation processes using selected microsegregation models. Two models of non-equilibrium crystallization are considered: the model with fully suppressed diffusion in the solid phase (Scheil's model) and the model with partial diffusion in the solid phase (Brody-Flemings' model). Original experimental data obtained from microanalytical measurements on samples of real steels were used for calculations and also the findings obtained at the modeling of microsegregation processes in steels. The results are compared with the solidus and liquidus temperatures calculated according to the relationships given in the available literature and with the liquidus and solidus temperatures obtained experimentally by DTA. Conclusions about the influence of microsegregation processes and influence of chemical composition on the solidification temperature of steels are stated.
引用
收藏
页码:110 / 115
页数:6
相关论文
共 50 条
  • [21] Simulation and Calculation to Segregation of High Nitrogen Steels Solidification Process Based on PROCAST Software
    Li Wan-ming
    Jiang Zhou-hua
    Li Hua-bing
    HIGH PERFORMANCE STRUCTURES AND MATERIALS ENGINEERING, PTS 1 AND 2, 2011, 217-218 : 1185 - 1190
  • [22] Grain boundary phosphorous segregation and its influence on the ductile brittle transition temperature in reactor pressure vessel steels
    Kimura, A
    Shibata, M
    Kasada, R
    Nakata, H
    Fujii, K
    Fukuya, K
    EFFECTS OF RADIATION ON MATERIALS: 21ST INTERNATIONAL SYMPOSIUM, 2004, 1447 : 565 - 578
  • [23] Gravity influence on solidification and segregation of CoCrFeNiCu/Y high entropy alloy
    Li, G.
    Zhang, L. J.
    Liu, D. J.
    Yu, P. F.
    Liaw, P. K.
    Liu, R. P.
    MATERIALS CHEMISTRY AND PHYSICS, 2018, 210 : 315 - 319
  • [24] Modelling of the influence of residual gravity on the segregation in directional solidification under microgravity
    Ruiz, X.
    JOURNAL OF CRYSTAL GROWTH, 2007, 303 (01) : 262 - 268
  • [25] PERITECTIC SOLIDIFICATION IN STEELS
    MALINOCH.YN
    KOVALCHU.GZ
    SLINKO, LA
    SAVICH, AI
    RUSSIAN METALLURGY, 1972, (06): : 118 - 123
  • [26] RAPID SOLIDIFICATION OF STEELS
    RAMACHANDRARAO, P
    BULLETIN OF MATERIALS SCIENCE, 1992, 15 (06) : 503 - 513
  • [27] INFLUENCE OF CARBON CONTENT ON HIGH-TEMPERATURE STRENGTH AND DUCTILITY OF LOW ALLOYED STEELS AFTER SOLIDIFICATION FROM THE MELT
    SCHMIDTMANN, E
    PLEUGEL, L
    ARCHIV FUR DAS EISENHUTTENWESEN, 1980, 51 (02): : 49 - 54
  • [28] INFLUENCE OF RAPID SOLIDIFICATION ON THE MECHANICAL-PROPERTIES OF AUSTENITIC MANGANESE STEELS
    MACKAY, WBF
    SMITH, RW
    JOURNAL OF METALS, 1982, 34 (08): : 58 - 58
  • [29] Influence of solidification cell structure on the martensitic transformation in additively manufactured steels
    Freeman, Felicity S. H. B.
    Sharp, Jo
    Xi, Jiawei
    Todd, Iain
    ADDITIVE MANUFACTURING, 2019, 30
  • [30] INFLUENCE OF SOLIDIFICATION STRUCTURE AND CASTING SPEED ON THE CENTER POROSITY OF DIFFERENT STEELS
    WIEMER, HE
    JACOBI, H
    WUNNENBERG, K
    STAHL UND EISEN, 1995, 115 (09): : 67 - &