Airbag tool polishing for aspherical glass lens molds

被引:14
|
作者
Lee, Hocheol [1 ]
Kim, Junguk [1 ]
Kang, Hyunhyung [1 ]
机构
[1] Hanbat Natl Univ, Dept Mech Engn, Taejon 305719, South Korea
基金
新加坡国家研究基金会;
关键词
Airbag tool; Aspherical lens; Footprint; Polishing; Tool mark; SURFACES; MACHINE; DIE;
D O I
10.1007/s12206-009-1120-y
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper presents a novel airbag tool polishing technique for small aspherical glass lens molds. For a mold material such as tungsten-carbide, an ultra-precise grinding technique is used to generate the aspherical surface. However, the residual tool marks of the spiral pattern and scratch unavoidably develop on the mold surface. Therefore, post-polishing is required to obtain the optical surface. Footprinting by the superposition method without trajectory control was applied to polish the finely ground aspherical lens mold. A white light interferometer confirmed the tool mark removal effect. The final surface toughness was Ra 2nm. Microscopic observation also showed a cleaner surface without scratches.
引用
收藏
页码:153 / 158
页数:6
相关论文
共 50 条
  • [21] Electrorheological fluid-assisted polishing of WC micro aspherical glass moulding dies
    Kaku, Tsuyoshi
    Kuriyagawa, Tsunemoto
    Yoshihara, Nobuhito
    International Journal of Manufacturing Technology and Management, 2006, 9 (1-2) : 109 - 119
  • [22] Aspherical lens design
    Gutierrez, Cristian E.
    JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION, 2013, 30 (09) : 1719 - 1726
  • [23] Aspherical lens systems
    Silberstein, L
    JOURNAL OF THE OPTICAL SOCIETY OF AMERICA AND REVIEW OF SCIENTIFIC INSTRUMENTS, 1925, 11 (05): : 479 - 494
  • [24] Aspherical Converter Lens
    Kweon, Gyeong-Il
    Kim, Cheol-Ho
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2009, 54 (01) : 53 - 58
  • [25] A polishing system for aspherical surface generation
    Chang, SH
    Lin, HY
    Wu, TC
    PROCEEDINGS OF THE THIRTEENTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1998, : 173 - 176
  • [26] Criterion to appreciate difficulties of Aspherical polishing
    du Jeu, C
    OPTICAL FABRICATION, METROLOGY, AND MATERIAL ADVANCEMENTS FOR TELESCOPES, 2004, 5494 : 113 - 121
  • [27] ASPHERICAL SURFACE POLISHING WITH A RING POLISHER
    CHEN, GH
    MOORE, DT
    APPLIED OPTICS, 1979, 18 (04): : 559 - 562
  • [28] Polishing of stereolithography injection molds
    Blair, B
    Colton, J
    CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS, 1998, 44 : 884 - 887
  • [29] Optical fabrication - Simple holes serve as glass-lens molds
    Wallace, J
    LASER FOCUS WORLD, 2006, 42 (01): : 28 - 29
  • [30] Local material removal mechanism considering curvature effect in the polishing process of the small aspherical lens die
    Yang, MY
    Lee, HC
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 116 (2-3) : 298 - 304