Heat (mass) transfer and friction loss in two-pass ducts with various parallel rib arrangements

被引：5

作者：

Kim, Kyung Min ^{[1
]}

Lee, Sei Young ^{[2
]}

Lee, Dong Hyun ^{[1
]}

Cho, Hyung Hee ^{[1
]}

机构：

[1] Yonsei Univ, Dept Mech Engn, Seoul 120749, South Korea

[2] Univ Texas Austin, Dept Mech Engn, Austin, TX 78712 USA

来源：

HEAT AND MASS TRANSFER | 2009年 / 45卷 / 06期

关键词：

HEAT/MASS TRANSFER PHENOMENA; ROTATING PASSAGE; PRESSURE-DROP; CHANNELS; FLOW;

D O I：

10.1007/s00231-008-0469-2

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The present study investigated the effects of four parallel rib arrangements on heat/mass transfer and pressure drop characteristics in rotating two-pass ducts. The experiments of mass transfer and pressure measurement are performed to obtain heat transfer distributions and friction losses. The highest averaged heat (mass) transfer and friction loss in each region appeared in the turning region in the stationary cases, but appeared in the upstream region of the second pass in the rotating cases. Among the tested rib arrangements, the averaged heat (mass) transfer and the friction factor in the second pass in the stationary ducts were high in the cases with the NN- and PP-type ribs; however, in the rotating ducts, they were high in the cases with the NN- and PN-type ribs. The thermal performance in the four different rib arrangements was almost the same.

引用

页码：783 / 792

页数：10

共 50 条

[41] Effect of rotation on heat transfer in two-pass square channels with five different orientations of 45° angled rib turbulators
Al-Hadhrami, L
Han, JC
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (04) : 653 - 669
[42] Heat transfer characteristics in two-pass rib-roughened channel at high rotation number with different channel angles
Wang, Hui
Tian, Shu-Qing
Deng, Hong-Wu
Hangkong Dongli Xuebao/Journal of Aerospace Power, 2015, 30 (10): : 2391 - 2400
[43] Numerical simulations of heat transfer distribution of a two-pass square channel with V-rib turbulator and bleed holes
Sourabh Kumar
R. S. Amano
Jose Martinez Lucci
Heat and Mass Transfer, 2013, 49 : 1141 - 1158
[44] Heat transfer and pressure drop in two-pass rib-roughened square channels with bleed from sharp bend
Chang, Shyy Woei
Cai, Zong-Xian
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2010, 31 (01) : 19 - 31
[45] Detailed measurement of heat/mass transfer and pressure drop in a rotating two-pass duct with transverse ribs
Kim, Kyung Min
Lee, Dong Hyun
Cho, Hyung Hee
HEAT AND MASS TRANSFER, 2007, 43 (08) : 801 - 815
[46] EFFECT OF GUIDE VANES IN THE TIP TURN REGION ON HEAT/MASS TRANSFER OF ROTATING TWO-PASS CHANNEL
Park, Jun Su
Lee, Dong Myeong
Lee, Dong Hyun
Lee, Sanghoon
Kim, Beom Soo
Cho, Hyung Hee
PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 4, PTS A AND B, 2012, : 589 - +
[47] Heat (mass) transfer in rectangular cross-sectioned two-pass channels with an inclined divider wall
Hirota, M
Fujita, H
Cai, L
Nakayama, H
Yanagida, M
Syafa'at, A
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (05) : 1093 - 1107
[48] Rib spacing effect on heat transfer and pressure loss in a rotating two-pass rectangular channel (AR=1:2) with 45-degree angled ribs
Liu, Yao-Hsien
Wright, Lesley M.
Fu, Wen-Lung
Han, Je-Chin
PROCEEDINGS OF THE ASME TURBO EXPO 2006, VOL 3, PTS A AND B: HEAT TRANSFER: GENERAL INTEREST, 2006, : 363 - 373
[49] Heat mass transfer characteristics in two-pass smooth channels with a sharp 180-deg turn
Hirota, M
Fujita, H
Syuhada, A
Araki, S
Yoshida, T
Tanaka, T
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1999, 42 (20) : 3757 - 3770
[50] Detailed measurement of heat/mass transfer and pressure drop in a rotating two-pass duct with transverse ribs
Kyung Min Kim
Dong Hyun Lee
Hyung Hee Cho
Heat and Mass Transfer, 2007, 43 : 801 - 815

← 1 2 3 4 5 →