Study of corrosion resistance of FeNbCuSiB alloys with Mo addition

被引：0
|
作者：
May, JE [1 ]
Borrozino, R [1 ]
Kuri, SE [1 ]
Souza, CAC [1 ]
机构：
[1] Univ Fed Sao Carlos, Dept Mat Engn, BR-13560 Sao Carlos, SP, Brazil
来源：
ISMANAM 2003: METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS | 2004年 / 20-21卷
关键词：
amorphous alloy; nanocrystalline alloy;
D O I：
10.4028/www.scientific.net/JMNM.20-21.781
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Nanocrystalline FeCuNbSiB alloys obtained from partial crystallization of amorphous alloys have attracted technological attention due to their excellent magnetic properties. The effect of Nb addition on FeCuSiB based alloys structure is known. The effect of Nb and/or Mo addition on the structure and corrosion resistance of FeCuSiB based alloys were investigated. The addition of Mo and/or Nb decrease the crystalline grain size, increase the crystalline fraction and the corrosion resistance of FeCuSiB alloy. These effects are more effective in Nb presence than in Mo presence. However the crystalline fraction and corrosion resistance of Fe73,5Cu1Nb1,5Mo1,5Si13,5B9 nanocrystalline alloy is almost the same when compared with the Fe73,5Cu1Nb3Si13,5B9 nanocrystalline alloy.
引用
收藏
页码：781 / 786
页数：6
相关论文
共 50 条
  • [21] Effects of Mn addition on the corrosion behaviors of Zr-Sn-Nb-Fe-Mo alloys
    Shi, Huigang
    Guo, Xianglong
    Li, Jiuxiao
    Mao, Jianwei
    Lu, Weijie
    CORROSION SCIENCE, 2019, 157 : 167 - 179
  • [22] Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments
    Xu-Liang Shang
    Zhi-Jun Wang
    Qing-Feng Wu
    Jin-Cheng Wang
    Jun-Jie Li
    Jia-Kang Yu
    ActaMetallurgicaSinica(EnglishLetters), 2019, 32 (01) : 41 - 51
  • [23] Improvement of microstructure, mechanical and corrosion properties of biomedical Ti-Mn alloys by Mo addition
    Santos, Pedro Fernandes
    Niinomi, Mitsuo
    Liu, Huihong
    Cho, Ken
    Nakai, Masaaki
    Trenggono, Adhitya
    Champagne, Sebastien
    Hermawan, Hendra
    Narushima, Takayuki
    MATERIALS & DESIGN, 2016, 110 : 414 - 424
  • [24] Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments
    Xu-Liang Shang
    Zhi-Jun Wang
    Qing-Feng Wu
    Jin-Cheng Wang
    Jun-Jie Li
    Jia-Kang Yu
    Acta Metallurgica Sinica (English Letters), 2019, 32 : 41 - 51
  • [25] Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys
    Shixing Huang
    Qinyang Zhao
    Yongqing Zhao
    Cheng Lin
    Cong Wu
    Weiju Jia
    Chengliang Mao
    Vincent Ji
    JournalofMaterialsScience&Technology, 2021, 79 (20) : 147 - 164
  • [26] Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys
    Huang, Shixing
    Zhao, Qinyang
    Zhao, Yongqing
    Lin, Cheng
    Wu, Cong
    Jia, Weiju
    Mao, Chengliang
    Ji, Vincent
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 79 : 147 - 164
  • [27] Summarization on the performance study of corrosion resistance of zirconium alloys
    Huang, Qiang
    Hedongli Gongcheng/Nuclear Power Engineering, 1996, 17 (03): : 262 - 267
  • [28] DAMPING CAPACITY AND PITTING CORROSION-RESISTANCE OF FE-MO-CR ALLOYS
    MASUMOTO, H
    SAWAYA, S
    HINAI, M
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1983, 47 (05) : 439 - 445
  • [29] HIGH CORROSION-RESISTANCE OF AMORPHOUS CO-CR-MO-ZR ALLOYS
    NAKA, M
    MIYAKE, M
    MAEDA, M
    OKAMOTO, I
    ARATA, Y
    SCRIPTA METALLURGICA, 1983, 17 (11): : 1293 - 1297
  • [30] DAMPING CAPACITY AND PITTING CORROSION-RESISTANCE OF FE-MO-CR ALLOYS
    MASUMOTO, H
    HINAI, M
    SAWAYA, S
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1984, 25 (12): : 891 - 899
12345