3D-Printed Frequency Selective Surfaces for Microwave Absorbers

被引：0
|
作者：
Kronberger, Rainer [1 ]
Soboll, Patrick [1 ]
机构：
[1] TH Koeln Univ Technol Arts & Sci, High Frequency Lab, Betzdorfer Str 2, D-50679 Cologne, Germany
来源：
2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP) | 2016年
关键词：
3D-Printing; printed absorber; FSS;
D O I：
暂无
中图分类号：
TN [电子技术、通信技术];
学科分类号：
0809 ;
摘要：
A flat periodic FSS (frequency selective surface) is presented, which is fully fabricated by a 3D-printer and commercial 3D printing filaments which normally are used for printing metal like structures. The FSS absorber structure was developed and optimized for 10 GHz, fabricated with the 3D printer, measured afterwards and compared with the simulations. Further simulations were made with the new materials at higher frequencies and the results confirm that 3D printing technology works well and could be used to the best advantage for absorbers and other applications in the frequency range below 100 GHz.
引用
收藏
页码：178 / 179
页数：2
相关论文
共 50 条
  • [21] Frequency Selective Surfaces Formed by Partially Metalising 3D Printed Shapes
    Sanz-Izquierdo, B.
    Parker, E. A.
    2015 9th European Conference on Antennas and Propagation (EuCAP), 2015,
  • [22] Extraction of 3D Printed Material for Magnetically Tuned Frequency Selective Surfaces
    Alhassoon, K.
    Malallah, Y.
    Sarnaik, A.
    Kolwalkar, C.
    Daryoush, A. S.
    Tudor, D.
    Kumar, N.
    2017 IEEE MTT-S INTERNATIONAL MICROWAVE AND RF CONFERENCE (IMARC), 2017, : 110 - 112
  • [23] Rapid and selective actuation of 3D-printed shape-memory composites via microwave heating
    Soo-Chan An
    Yeonsoo Lim
    Young Chul Jun
    Scientific Reports, 13
  • [24] Selective electroless plating of 3D-printed plastic structures for three-dimensional microwave metamaterials
    Ishikawa, Atsushi
    Kato, Taiki
    Takeyasu, Nobuyuki
    Fujimori, Kazuhiro
    Tsuruta, Kenji
    APPLIED PHYSICS LETTERS, 2017, 111 (18)
  • [25] Rapid and selective actuation of 3D-printed shape-memory composites via microwave heating
    An, Soo-Chan
    Lim, Yeonsoo
    Jun, Young Chul
    SCIENTIFIC REPORTS, 2023, 13 (01)
  • [26] Low-Roughness 3D-Printed Surfaces by Ironing for the Integration with Printed Electronics
    Neuhaus, Benno
    Idris, Mohamad Kannan
    Naderi, Paria
    El-Hajj, Yoland
    Grau, Gerd
    ADVANCED ENGINEERING MATERIALS, 2024, 26 (03)
  • [27] 3D-printed bioinspired acoustic sensors for frequency decomposition
    Domingo-Roca, Roger
    Klenschi, Elizabeth
    Jackson, Joseph
    Windmill, James
    2019 IEEE SENSORS, 2019,
  • [28] Narrowband Frequency-Selective Surface on 3D-Printed Substrate for X-Band Applications
    Inbarani, J.
    Manikandan, E.
    JOURNAL OF ELECTRONIC MATERIALS, 2024, 53 (12) : 8223 - 8231
  • [29] Printed frequency selective surfaces on textiles
    Whittow, W. G.
    Li, Y.
    Torah, R.
    Yang, K.
    Beeby, S.
    Tudor, J.
    ELECTRONICS LETTERS, 2014, 50 (13) : 916 - +
  • [30] Study of 3D-Printed Dielectric Barrier Windows for Microwave Applications
    Proyavin, Mikhail D.
    Sobolev, Dmitry, I
    Parshin, Vladimir V.
    Belousov, Vladimir, I
    Mishakin, Sergey, V
    Glyavin, Mikhail Y.
    ELECTRONICS, 2021, 10 (18)
12345