Research and development on full distribution CNC system

被引：0
|
作者：
Chen, Z. Y. [1 ]
Guo, W. [1 ]
Li, C. X. [1 ]
机构：
[1] Shanghai Jiao Tong Univ, Natl Die&Mould CAD Engn Res Ctr, Shanghai 200030, Peoples R China
来源：
2006 1ST IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-3 | 2006年
关键词：
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The CNC architecture by expanding different motion cards is popular now, but it still lacks good configurable performance, the most functions of the motion card are redundant, and the control requirements cannot be met on the complex and high-precision situations. In this paper, a new Full Distribution CNC (FDCNC) system is presented. In this structure, the former two-grade interpolation is replaced with offline interpolation method; the motion control card in IPC is displaced with several intelligent nodes embedded in servo controllers. Communication between IPC and servo controllers is through CAN, which can transmit a lot of data in two directions and its communication protocol is public and standard. Thus, it gets much easier to repair, reconfigure, and replace some components. Additionally, enough information does great good to watching and diagnosing. Due to the use of Windows NT+RTX, not only developers are able to take advantage of the abundant Windows resources, but also CNC system possesses friendly graphic user interface (GUI), excellent open performance and good real-time performance. At last a running case is given.
引用
收藏
页码：109 / +
页数：2
相关论文
共 50 条
  • [41] Research on the interface of the CNC system based on CAN bus
    Zhongguo Jixie Gongcheng, 2007, 2 (178-182):
  • [42] Research and Implementation of Embedded CNC System Based on Linux
    Xu, Wei
    Liu, Zhaoming
    MANUFACTURING PROCESS AND EQUIPMENT, PTS 1-4, 2013, 694-697 : 2604 - 2607
  • [43] A research on Configuration CNC System Based on Component Technology
    Bai, J.
    Qin, X. S.
    Li, M.
    Jiang, M. J.
    2008 2ND INTERNATIONAL SYMPOSIUM ON SYSTEMS AND CONTROL IN AEROSPACE AND ASTRONAUTICS, VOLS 1 AND 2, 2008, : 740 - +
  • [44] Research on Control Software Design Platform for CNC System
    Zhai, Zhenkun
    Li, Di
    Zhou, Nan
    2015 IEEE INTERNATIONAL CONFERENCE ON CYBER TECHNOLOGY IN AUTOMATION, CONTROL, AND INTELLIGENT SYSTEMS (CYBER), 2015, : 1411 - 1415
  • [45] Research on Open CNC System Based on Quantum Framework
    Han, J.
    Dai, W. M.
    Xia, L.
    Tang, B.
    MANUFACTURING AUTOMATION TECHNOLOGY, 2009, 392-394 : 309 - 313
  • [46] Research of Control System for Embedded CNC Spring Machine
    Wu, Ziyue
    Xiao, Kai
    Li, Gen
    Wang, Jinyao
    Yang, Xu
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON EDUCATION, MANAGEMENT, INFORMATION AND MECHANICAL ENGINEERING (EMIM 2017), 2017, 76 : 28 - 33
  • [47] Design and Research of HMI Based on the Qt for CNC System
    Sun, Ruirui
    Cheng, Guanghe
    Sun, Xiang
    PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016), 2016, 73 : 1332 - 1339
  • [48] Research on Reliability Design Theory and Methods of CNC system
    Wang, Taiyong
    Liu, Qingjian
    Wang, Yunfeng
    Yue, Jianhai
    Jin, Dafeng
    IMECE2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 13, 2010, : 247 - 253
  • [49] Research on Nonlinear PID position controller of CNC system
    Zhao, Guoyong
    Zhao, Yugang
    Dong, Aimei
    Zhang, Lili
    2007 IEEE INTERNATIONAL CONFERENCE ON AUTOMATION AND LOGISTICS, VOLS 1-6, 2007, : 2446 - +
  • [50] Research on the Positioning Servo Control Strategy for CNC System
    Zhang, Libing
    Wu, Ting
    MANUFACTURING PROCESS AND EQUIPMENT, PTS 1-4, 2013, 694-697 : 1851 - 1854
12345