A new approach to flux deposition for brazing aluminium by low pressure cold spraying

被引：0
|
作者：
Wojdat, Tomasz [1 ]
Winnicki, Marcin [1 ]
Pabian, Jaroslaw [2 ]
机构：
[1] Wroclaw Univ Sci & Technol, Dept Met Forming Welding & Metrol, Wroclaw, Poland
[2] Mahle Behr Corp, Ostrow Wielkopolski, Poland
来源：
MATERIALS SCIENCE-POLAND | 2022年 / 40卷 / 04期
关键词：
flux deposition; low-pressure cold spraying; aluminium alloy; brazing; flux powder; brazed joints; B-AlSi12 filler metal; COATINGS;
D O I：
10.2478/msp-2022-0048
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents the results of study on the possibility of Nocolok flux deposition to aluminium substrates using the lowpressure cold gas spraying (LPCS) method. An innovative method of applying flux in the form of a powder without organic adhesive additives was proposed, allowing strict control of the deposited material. The influence of the flux powder feeding rate (PFR - 4.5 g/min, 6.3 g/min and 8.5 g/min) on the efficiency of the brazing process of AA3003 aluminium alloy plates was investigated. The results of energy dispersive spectrometry (EDS) analysis of the deposited flux coatings are presented for various process parameters. The wettability tested by spreading the B-AlSi12 filler metal on flux-covered aluminium substrates increased significantly with increasing PFR - the contact angle decreased from 21.0 degrees to 4.6 degrees. Microstructure analysis confirmed the high quality of the brazed joints, which were devoid of braze incompatibilities.
引用
收藏
页码：114 / 124
页数：11
相关论文
共 50 条
  • [21] Low pressure cold spraying of TiO2 on acrylonitrile butadiene styrene (ABS)
    Winnicki, M.
    Gibas, A.
    Baszczuk, A.
    Jasiorski, M.
    SURFACE & COATINGS TECHNOLOGY, 2021, 406
  • [22] Mechanical properties of TiO2 coatings deposited by low pressure cold spraying
    Winnicki, M.
    Latka, L.
    Jasiorski, M.
    Baszczuk, A.
    SURFACE & COATINGS TECHNOLOGY, 2021, 405
  • [23] Influence of process conditions in laser-assisted low-pressure cold spraying
    Kulmala, M.
    Vuoristo, P.
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (18): : 4503 - 4508
  • [24] Possibility of spraying of copper coatings on polyamide 6 with low pressure cold spray method
    Malachowska, Aleksandra
    Winnicki, Marcin
    Konat, Lukasz
    Piwowarczyk, Tomasz
    Pawlowski, Lech
    Ambroziak, Andrzej
    Stachowicz, Mateusz
    SURFACE & COATINGS TECHNOLOGY, 2017, 318 : 82 - 89
  • [25] Analysis of single spray beads prepared using low-pressure cold spraying
    Koivuluoto, Heli
    Vuoristo, Petri
    SURFACE ENGINEERING, 2014, 30 (06) : 451 - 454
  • [26] Solvothermal approach for low temperature deposition of aluminium oxide thin films
    Duan, XiaoFei
    Tran, Nguyen H.
    Roberts, Nicholas K.
    Lamb, Robert N.
    THIN SOLID FILMS, 2010, 518 (15) : 4290 - 4293
  • [27] Vapors and Droplets Mixture Deposition of Metallic Coatings by Very Low Pressure Plasma Spraying
    B. Vautherin
    M.-P. Planche
    R. Bolot
    A. Quet
    L. Bianchi
    G. Montavon
    Journal of Thermal Spray Technology, 2014, 23 : 596 - 608
  • [28] Vapors and Droplets Mixture Deposition of Metallic Coatings by Very Low Pressure Plasma Spraying
    Vautherin, B.
    Planche, M. -P.
    Bolot, R.
    Quet, A.
    Bianchi, L.
    Montavon, G.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, 23 (04) : 596 - 608
  • [29] Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying
    Li, Yong
    Li, Chang-Jiu
    Yang, Guan-Jun
    Xing, Lu-Kuo
    SURFACE & COATINGS TECHNOLOGY, 2010, 205 (07): : 2225 - 2233
  • [30] New method for flux free diffusion brazing of aluminium alloys using liquid gallium (UK patent application 0128623.6)
    Shirzadi, AA
    Saindrenan, G
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2003, 8 (02) : 149 - 153
12345