A new approach to flux deposition for brazing aluminium by low pressure cold spraying

被引：0
|
作者：
Wojdat, Tomasz [1 ]
Winnicki, Marcin [1 ]
Pabian, Jaroslaw [2 ]
机构：
[1] Wroclaw Univ Sci & Technol, Dept Met Forming Welding & Metrol, Wroclaw, Poland
[2] Mahle Behr Corp, Ostrow Wielkopolski, Poland
来源：
MATERIALS SCIENCE-POLAND | 2022年 / 40卷 / 04期
关键词：
flux deposition; low-pressure cold spraying; aluminium alloy; brazing; flux powder; brazed joints; B-AlSi12 filler metal; COATINGS;
D O I：
10.2478/msp-2022-0048
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents the results of study on the possibility of Nocolok flux deposition to aluminium substrates using the lowpressure cold gas spraying (LPCS) method. An innovative method of applying flux in the form of a powder without organic adhesive additives was proposed, allowing strict control of the deposited material. The influence of the flux powder feeding rate (PFR - 4.5 g/min, 6.3 g/min and 8.5 g/min) on the efficiency of the brazing process of AA3003 aluminium alloy plates was investigated. The results of energy dispersive spectrometry (EDS) analysis of the deposited flux coatings are presented for various process parameters. The wettability tested by spreading the B-AlSi12 filler metal on flux-covered aluminium substrates increased significantly with increasing PFR - the contact angle decreased from 21.0 degrees to 4.6 degrees. Microstructure analysis confirmed the high quality of the brazed joints, which were devoid of braze incompatibilities.
引用
收藏
页码：114 / 124
页数：11
相关论文
共 50 条
  • [1] Application of cold spraying for flux-free brazing of aluminium alloy 6060
    Bobzin K.
    Zhao L.
    Schlaefer T.
    Warda T.
    Frontiers of Mechanical Engineering in China, 2010, 5 (3): : 256 - 260
  • [2] Flux-free brazing of Mg-containing aluminium alloys by means of cold spraying
    Bobzin K.
    Zhao L.
    Ernst F.
    Richardt K.
    Frontiers of Mechanical Engineering in China, 2008, 3 (4): : 355 - 359
  • [3] Deposition of Titanium-Containing Coatings by Low-Pressure Cold Spraying
    Volkov, Andrey
    Shorinov, Oleksandr
    Polyviany, Sergii
    INTEGRATED COMPUTER TECHNOLOGIES IN MECHANICAL ENGINEERING - 2021, 2022, 367 : 565 - 574
  • [4] Deposition of aluminium alloy Al12Si by cold spraying
    Zhao, Lidong
    Bobzin, Kirsten
    He, Dingyong
    Zwick, Jochen
    Ernst, Felix
    Lugscheider, Erich
    ADVANCED ENGINEERING MATERIALS, 2006, 8 (04) : 264 - 267
  • [5] Experimental study on aluminium bronze coatings fabricated by low pressure cold spraying and subsequent heat treatment
    Winnicki, M.
    Baszczuk, A.
    Gibas, A.
    Jasiorski, M.
    SURFACE & COATINGS TECHNOLOGY, 2023, 456
  • [6] The effect of processing variables on deposition characteristics of aluminium by cold gas dynamic spraying
    Zhang, D
    Shipway, PH
    McCarney, DG
    CONTRIBUTIONS OF SURFACE ENGINEERING TO MODERN MANUFACTURING AND REMANUFACTURING, 2002, : 105 - 110
  • [7] Low Pressure Cold Spraying on Materials with Low Erosion Resistance
    Shikalov, V. S.
    Klinkov, S. V.
    Kosarev, V. F.
    PROCEEDINGS OF THE XXV CONFERENCE ON HIGH-ENERGY PROCESSES IN CONDENSED MATTER (HEPCM 2017), 2017, 1893
  • [8] Low pressure cold spraying under 6 bar pressure deposition: Exploration of high deposition efficiency solutions using a mathematical modelling
    Raoelison, R. N.
    Aubignat, E.
    Planche, M. -P.
    Costil, S.
    Langlade, C.
    Liao, H.
    SURFACE & COATINGS TECHNOLOGY, 2016, 302 : 47 - 55
  • [9] Organic composite metallization using Low Pressure Cold Spraying
    Costil, S.
    Aubignat, E.
    Langlade, C.
    Gillet, V.
    Courant, B.
    Casari, P.
    Knapp, W.
    INTERNATIONAL THERMAL SPRAY CONFERENCE AND EXPOSITION (ITSC 2018), 2018, : 242 - 247
  • [10] Low Pressure Cold Spraying of Tungsten Carbide Composite Coatings
    Wang, J.
    Villafuerte, J.
    ADVANCED MATERIALS & PROCESSES, 2009, 167 (02): : 54 - 56
12345