The modeling of the transverse mode in TC-SAW using SiO2/LiNbO3 structure

被引：17

作者：

Goto, Rei ^{[1
,2
]}

Nakamura, Hiroyuki ^{[1
]}

Hashimoto, Ken-ya ^{[2
]}

机构：

[1] Skyworks Solut Inc, 1006 Kadoma, Osaka 5718501, Japan

[2] Chiba Univ, Inage Ku, 1-33 Yayoi Cho, Chiba 2638522, Japan

来源：

JAPANESE JOURNAL OF APPLIED PHYSICS | 2019年 / 58卷 / SG期

关键词：

ACOUSTIC-WAVE DUPLEXER; SIO2/AL/LINBO3; STRUCTURE; EXCELLENT TEMPERATURE; PROPAGATION; SUPPRESSION; FILTERS; PCS; US;

D O I：

10.7567/1347-4065/ab1bd3

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

The temperature-compensated surface acoustic waves (TC-SAW) have been developed to fulfill tight roll-off requirements for recent mobile communication systems. Use of the Rayleigh SAW on SiO2-overlay/LiNbO3 substrate structure is one of the most promising techniques for the purpose. Currently, SAW device designs are done entirely through computer simulation, and their accuracy significantly impacts achievable device performance. The coupling of modes (COM) model is widely used for the acoustic simulation and its applicability is well recognized. This paper proposes a simple simulation model based on COM model for the transverse mode behaviors in the TC-SAW devices and applied to the device design. Double mode saw filter and ladder type filter are optimized with the proposed model. Optimized structure is applied to the development of the 1.6 x 1.2 mm(2) sized duplexer for LTE Band 8. Smooth passband characteristics with less transverse modes responses are achieved by using the proposed method. (C) 2019 The Japan Society of Applied Physics

引用

页数：6

共 50 条

[21] Highly piezoelectric boundary waves in Si/SiO2/LiNbO3 structure
Yamaguchi, M
Yamashita, T
Hashimoto, K
Omori, T
PROCEEDINGS OF THE 1998 IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM, 1998, : 484 - 488
[22] Effect of SiO2 protective layer on LiNbO3 structured SAW resonators and temperature characteristics study
Qiang, Liu
Yang, Wenlong
Chi, Chen
Li, Hongyuan
Hong, Xu
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2023, 33 (10)
[23] Small-sized SAW Duplexers with Wide Duplex Gap on a SiO2/Al/LiNbO3 structure by using Novel Rayleigh-mode Spurious Suppression Technique
Nakanishi, H.
Nakamura, H.
Hamaoka, Y.
Kamiguchi, H.
Iwasaki, Y.
2008 IEEE ULTRASONICS SYMPOSIUM, VOLS 1-4 AND APPENDIX, 2008, : 1588 - +
[24] Suppression Technique of fast-shear-wave Spurious Responses in SAW Resonators on SiO2/Al/LiNbO3 Structure
Fujiwara, J.
Goto, R.
Nakamura, H.
Tsurunari, T.
Nakanishi, H.
Hamaoka, Y.
2012 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2012, : 799 - 802
[25] Theoretical Studies on LiNbO3/Sapphire layered structure with SiO2 over layer for zero TCD SAW device applications
Tomar, M
Gupta, V
Sreenivas, K
2001 IEEE ULTRASONICS SYMPOSIUM PROCEEDINGS, VOLS 1 AND 2, 2001, : 265 - 268
[26] A Novel Structure to Suppress Transverse Modes in Radio Frequency TC-SAW Resonators and Filters
Liu, Yuhao
Liu, Jiansong
Wang, Yiliu
Lam, C. S.
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, 2019, 29 (04) : 249 - 251
[27] Phase separation and crystallization in LiNbO3/SiO2 glasses
Prapitpongwanich, Pattamaporn
Pengpat, Kamonpan
Ruessel, Christian
MATERIALS CHEMISTRY AND PHYSICS, 2009, 113 (2-3) : 913 - 918
[28] Transverse-Mode Spurious Suppression Technique for Surface Acoustic Wave Resonator with Zero Temperature Coefficient of Frequency on a SiO2/Al/LiNbO3 Structure
Nakanishi, Hidekazu
Nakamura, Hiroyuki
Tsurunari, Tetsuya
Fujiwara, Joji
Hamaoka, Yosuke
Hashimoto, Ken-ya
JAPANESE JOURNAL OF APPLIED PHYSICS, 2012, 51 (07)
[29] SAW PROPERTIES OF SIO2 128-DEGREES Y-X LINBO3 STRUCTURE FABRICATED BY MAGNETRON SPUTTERING TECHNIQUE
YAMANOUCHI, K
HAYAMA, S
IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1984, 31 (01): : 51 - 57
[30] Suppression of spurious responses near anti-resonance of TC-SAW resonators by selective thinning of SiO2
Yang, Zijiang
He, Yiwen
Luo, Huayong
Bao, Jingfu
Hashimoto, Ken-ya
JAPANESE JOURNAL OF APPLIED PHYSICS, 2024, 63 (03)

← 1 2 3 4 5 →