3D surface roughness effects on porous journal bearing performances

被引：0
|
作者：
Kerur, Mohammedrafi H. [1 ]
Nagaraju, T. [1 ]
机构：
[1] PES Coll Engn, Dept Mech Engn, Mandya 571401, Karnataka, India
来源：
PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015 | 2015年
关键词：
Porous journal bearing; surface roughness; performance characteristics; HYDRODYNAMIC LUBRICATION; SLIP;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Influence of 3D surface roughness parameters on performance characteristics of porous journal bearing is studied. The modified form of average Reynolds equation is developed for the porous bearing to include 3D surface roughness effect and its solution is obtained using finite element method. The influence of roughness orientations and roughness characteristics of opposing surfaces on load carrying capacity, coefficient of friction, fluid-film stiffness and damping coefficients of porous journal bearing are studied. Stationary roughness and transverse roughness pattern combination was found to provides maximum enhanced load carrying capacity, fluid-film stiffness and damping coefficients.
引用
收藏
页码：38 / 39
页数：2
相关论文
共 50 条
  • [31] THE EFFECTS OF 3D PRINTING PARAMETERS AND SURFACE ROUGHNESS ON CONVECTIVE HEAT TRANSFER PERFORMANCE
    Pereira, Lucas
    Letcher, Todd
    Michna, Gregory J.
    PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE, 2019, 2019,
  • [32] 3D optical surface profiler for quantifying leaf surface roughness
    Abbott, JohnPaul R.
    Zhu, Heping
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2019, 7 (04)
  • [33] Combined effects of surface roughness and physically adsorbed layer in hydrodynamic journal bearing with multiscale approach
    Gu, Kaicheng
    Zhang, Yongbin
    ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 2023, 103 (06):
  • [34] Stability analysis of double porous and surface porous layer journal bearing
    Rao, T. V. V. L. N.
    Rani, A. M. A.
    Awang, M.
    Nagarajan, T.
    Hashim, F. M.
    TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2016, 10 (01) : 19 - 25
  • [35] 3D Shape Retrieval Focused on Holes and Surface Roughness
    Aono, Masaki
    Koyanagi, Hitoshi
    Tatsuma, Atsushi
    2013 ASIA-PACIFIC SIGNAL AND INFORMATION PROCESSING ASSOCIATION ANNUAL SUMMIT AND CONFERENCE (APSIPA), 2013,
  • [36] On the Surface Roughness and Smoothing in the 3D Printed THz Reflectors
    Adibelli, Sinan
    Juyal, Prateek
    Zajic, Alenka
    2019 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND USNC-URSI RADIO SCIENCE MEETING, 2019, : 593 - 594
  • [37] Minimization Method for 3D Surface Roughness Evaluation Area
    Molnar, Viktor
    MACHINES, 2021, 9 (09)
  • [38] Wear Estimation using 3D Surface Roughness Parameters
    Linins, Oskars
    Krizbergs, Juris
    Boiko, Irina
    ENGINEERING MATERIALS AND TRIBOLOGY, 2013, 527 : 167 - 172
  • [39] 3D printed optics with nanometer scale surface roughness
    Vaidya, Nina
    Solgaard, Olav
    MICROSYSTEMS & NANOENGINEERING, 2018, 4
  • [40] 3D printed optics with nanometer scale surface roughness
    Nina Vaidya
    Olav Solgaard
    Microsystems & Nanoengineering, 4
12345