On the contact zone of a subinterfacial Zener-Stroh crack

被引:12
|
作者
Xiao, ZM [1 ]
Fan, H [1 ]
Sun, YM [1 ]
机构
[1] Nanyang Technol Univ, Sch Mech & Prod Engn, Singapore 639798, Singapore
关键词
D O I
10.1007/BF01190015
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
A Zener-Stroh crack is initiated by dislocations pile-up. Due to this displacement loading mechanism, only one of the two crack tips is sharp, and crack propagation is possible along the sharp tip only. When such a crack is initiated near an interface, the crack faces behind the sharp crack tip may contact each other due to material mismatch and loading combination. In the present study, a subinterface Zener-Stroh crack is analyzed with contact zone consideration near the tip. The problem is formulated as a set of nonlinear Cauchy-type singular integral equations which are solved numerically using Erdogan and Gupta's method. The physically pathological features of interpenetration of the crack surfaces and oscillation of the near tip fields are eliminated in the solutions due to the presence of a contact zone near the crack lip. It is found that the normal traction is bounded at the crack tip where a contact zone exists; while the shear traction has square-root singularities at both the crack tips. This result is totally different to the case of an interface crack where Mode I and Mode II stress intensity factors are inter-related at the sharp crack tip.
引用
收藏
页码:133 / 148
页数:16
相关论文
共 50 条
  • [41] Electro-elastic stress analysis for a Zener-Stroh crack at the metal/piezoelectric bi-material interface
    Xiao, ZM
    Zhao, JF
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2004, 41 (9-10) : 2501 - 2519
  • [42] On the plastic zone correction of a Zener–Stroh crack interacting with a nearby inhomogeneity and an edge dislocation
    M. Fan
    Z. M. Xiao
    J. Luo
    Acta Mechanica, 2015, 226 : 4173 - 4188
  • [43] On the plastic zone size and CTOD study for a Zener–Stroh crack interacting with a circular inclusion
    H. J. Hoh
    Z. M. Xiao
    J. Luo
    Acta Mechanica, 2011, 220 : 155 - 165
  • [44] Zener–Stroh crack at the interface of multi-layered structures
    Z. M. Xiao
    J. F. Zhao
    H. Fan
    International Journal of Fracture, 2005, 133 : 355 - 369
  • [45] A Zener–Stroh crack at the interface of a thin film bonded to a substrate
    Z.M. Xiao
    J.F. Zhao
    International Journal of Mechanics and Materials in Design, 2004, 1 (3) : 241 - 254
  • [46] Fracture analysis for a sub-interface Zener-Stroh crack in a bi-material plate under small-scale yielding condition
    Fan, M.
    Yi, D. K.
    Xiao, Z. M.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2015, 76 : 60 - 66
  • [47] Perturbation method for the solution of a Zener–Stroh crack with a slightly curved configuration
    Y. Z. Chen
    X. Y. Lin
    Z. X. Wang
    Acta Mechanica, 2009, 203 : 23 - 36
  • [48] Fracture behavior investigation on an arbitrarily oriented sub-interface Zener–Stroh crack
    M. Fan
    D. K. Yi
    Z. M. Xiao
    Acta Mechanica, 2015, 226 : 1591 - 1603
  • [49] An interfacial arc-shaped Zener–Stroh crack due to inclusion–matrix debonding in composites
    M. Fan
    D. K. Yi
    Z. M. Xiao
    Acta Mechanica, 2014, 225 : 909 - 918
  • [50] INTERFACE CRACK WITH FRICTION IN CONTACT ZONE
    COMNINOU, M
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1977, 44 (04): : 780 - 781