Subgrain growth and low angle boundary mobility in aluminium crystals of orientation {110}{001}

被引:183
|
作者
Huang, Y [1 ]
Humphreys, FJ [1 ]
机构
[1] Manchester Mat Sci Ctr, Manchester M1 7HS, Lancs, England
基金
英国工程与自然科学研究理事会;
关键词
electron diffraction; scanning electron microscopy; aluminum; recrystallization & recovery; subgrain growth;
D O I
10.1016/S1359-6454(99)00418-8
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Single crystals of orientation {110}[001] of a high purity Al-0.05% Si single-phase aluminium alloy have been deformed in channel die plane strain compression at room temperature and 350 degrees C. The specimens were annealed at temperatures between 250 and 400 degrees C and detailed measurements have been made of the extensive subgrain growth which occurs in these crystals. It was found that subgrain growth tended to be discontinuous, confirming earlier experimental and theoretical work, and showing that subgrain growth is quite different from normal grain growth. The mean misorientation between subgrains decreased during annealing and this was shown to have a strong effect on the kinetics of subgrain growth. The mobilities of low angle boundaries (2.6 degrees < theta < 5.6 degrees) at temperatures between 250 and 400 degrees C were determined from the subgrain growth kinetics and the activation energies for migration found to be consistent with control by lattice diffusion of solute. The boundary mobilities were found to increase rapidly with increasing misorientation and the results have been compared with the predictions of current theories. (C) 2000 Acta Metallurgica Inc. Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:2017 / 2030
页数:14
相关论文
共 50 条
  • [41] MICROSTRUCTURAL CHANGES DUE TO ROLLING OF AUSTENITIC STAINLESS-STEEL SINGLE-CRYSTALS WITH INITIAL ORIENTATION (110)[001] AND (110)[(1)OVER-BAR10]
    WROBEL, M
    DYMEK, S
    BLICHARSK, M
    DRIVER, J
    SCRIPTA METALLURGICA ET MATERIALIA, 1995, 32 (12): : 1985 - 1991
  • [42] Orientation Dependence of High-Angle Grain Boundary Formation during Sliding Wear in Copper Single Crystals
    Ohno, Yoshihiro
    Inotani, Junichi
    Kaneko, Yoshihisa
    Hashimoto, Satoshi
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2010, 74 (06) : 384 - 391
  • [43] Epitaxial growth of aluminium-doped zinc oxide films by magnetron sputtering on (001), (110), and (012) oriented sapphire substrates
    P. Kuppusami
    G. Vollweiler
    D. Rafaja
    K. Ellmer
    Applied Physics A, 2005, 80 : 183 - 186
  • [44] Epitaxial growth of aluminium-doped zinc oxide films by magnetron sputtering on (001), (110), and (012) oriented sapphire substrates
    Kuppusami, P
    Vollweiler, G
    Rafaja, D
    Ellmer, K
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2005, 80 (01): : 183 - 186
  • [45] A comparison of [001] low-angle tilt grain boundaries of (100) and (110) grain boundary planes in YBa2Cu3O7-δ coated conductors
    Kung, H
    Hirth, JP
    Foltyn, SR
    Arendt, PN
    Jia, QX
    Maley, MP
    PHYSICA C, 2001, 357 : 959 - 966
  • [46] Characteristics of short fatigue crack growth in the vicinity of a low angle grain boundary
    Hansson, P.
    Melin, S.
    INTERNATIONAL JOURNAL OF FATIGUE, 2012, 36 (01) : 59 - 67
  • [47] Lattice Rotation and Formation of Low-Angle Boundary in a (001) Copper Single Crystal Subjected to Sliding Wear
    Ohno, Y.
    Inotani, J.
    Kaneko, Y.
    Hashimoto, S.
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2008, 72 (08) : 625 - 630
  • [48] Structural variability of edge dislocations in a SrTiO3 low-angle [001] tilt grain boundary
    Buban, James P.
    Chi, Miaofang
    Masiel, Daniel J.
    Bradley, John P.
    Jiang, Bin
    Stahlberg, Henning
    Browning, Nigel D.
    JOURNAL OF MATERIALS RESEARCH, 2009, 24 (07) : 2191 - 2199
  • [49] Structural variability of edge dislocations in a SrTiO3 low-angle [001] tilt grain boundary
    James P. Buban
    Miaofang Chi
    Daniel J. Masiel
    John P. Bradley
    Bin Jiang
    Henning Stahlberg
    Nigel D. Browning
    Journal of Materials Research, 2009, 24 (7) : 2191 - 2199
  • [50] High-ductility aluminium alloys including small sub-grains with wide low angle boundary
    Joo, M. R.
    Jeon, J. H.
    Jeon, J. G.
    Lee, S. J.
    Choi, K. M.
    Oh, T. W.
    Lee, J. W.
    Shin, S. E.
    Choi, H. J.
    Kang, H.
    Shin, J. H.
    Ikeda, K.
    Bae, D. H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 934