In situ spatial strain monitoring of a single-lap joint using inkjet-printed carbon nanotube embedded thin films

被引：17
|
作者：
Zhao, Yingjun [1 ,2 ]
Schagerl, Martin [1 ,2 ]
Gschossmann, Sandra [2 ]
Kralovec, Christoph [1 ,2 ]
机构：
[1] Johannes Kepler Univ Linz, Christian Doppler Lab Struct Strength Control Lig, Alternberger Str 69, A-4040 Linz, Austria
[2] Johannes Kepler Univ Linz, Inst Struct Lightweight Design, Linz, Austria
来源：
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL | 2019年 / 18卷 / 5-6期
关键词：
Adhesive bonding; single-lap joint; carbon nanotubes; electrical impedance tomography; finite element analysis; ELECTRICAL-IMPEDANCE TOMOGRAPHY; ADHESIVELY BONDED JOINTS; DAMAGE;
D O I：
10.1177/1475921718805963
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Adhesive bonds are particularly favored by lightweight structures due to their weight efficiency and insulating property regarding contact corrosion. However, it is challenging to interrogate directly over the bonding area due to its sandwiched structure. In this study, an inkjet-printed carbon nanotube (CNT) strain distribution sensing film is embedded at the interface between an adherend and the adhesive in a single-lap joint configuration to monitor the spatial strain distribution over the bonding area. The conductivity distribution reconstructed by an algorithm of electrical impedance tomography (EIT) results in similar trend to the correlated conductivity distribution numerically calculated from a three-dimensional (3D) finite element model. Moreover, the EIT result of a defect-embedded testing specimen shows a different conductivity distribution compared to the healthy specimen, indicating the existence of the debonding region.
引用
收藏
页码：1479 / 1490
页数：12
相关论文
共 50 条
  • [41] Flexible and Transparent Touch Sensor using Single-Wall Carbon Nanotube Thin-Films
    Choi, Eun-Suk
    Jeong, Min-Ho
    Choi, Kang Won
    Lim, Chaehyun
    Lee, Seung-Beck
    INEC: 2010 3RD INTERNATIONAL NANOELECTRONICS CONFERENCE, VOLS 1 AND 2, 2010, : 718 - +
  • [42] Single-walled carbon nanotube-modified epoxy thin films for continuous crack monitoring of metallic structures
    Ashrafi, Behnam
    Johnson, Leon
    Martinez-Rubi, Yadienka
    Martinez, Marcias
    Mrad, Nezih
    STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2012, 11 (05): : 589 - 601
  • [43] In situ monitoring of through-thickness strain in glass fiber/epoxy composite laminates using carbon nanotube sensors
    Naghashpour, Ali
    Van Hoa, Suong
    COMPOSITES SCIENCE AND TECHNOLOGY, 2013, 78 : 41 - 47
  • [44] Integrable single walled carbon nanotube (SWNT) network based thin film transistors using roll-to-roll gravure and inkjet
    Noh, Jinsoo
    Jung, Minhun
    Jung, Kyunghwan
    Lee, Gwangyong
    Lim, Soyeon
    Kim, Daae
    Kim, Sangsig
    Tour, James M.
    Cho, Gyoujin
    ORGANIC ELECTRONICS, 2011, 12 (12) : 2185 - 2191
  • [45] Selectivity enhancement using mesoporous silica thin films for single walled carbon nanotube based vapour sensors
    Battie, Yann
    Ducloux, Olivier
    Patout, Loic
    Thobois, Philippe
    Loiseau, Annick
    SENSORS AND ACTUATORS B-CHEMICAL, 2012, 163 (01): : 121 - 127
  • [46] Fabrication of a Flexible and Transparent Touch Sensor Using Single-Walled Carbon Nanotube Thin-Films
    Choi, Eunsuk
    Kim, Jinoh
    Chun, Sungwoo
    Kim, Ahsung
    Lee, Kunhak
    Jeong, Minho
    Lim, Chaehyun
    Isoshima, Takashi
    Hara, Masahiko
    Lee, Seung-Beck
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (07) : 5845 - 5849
  • [47] Transparent and flexible electrodes and supercapacitors using polyaniline/single-walled carbon nanotube composite thin films
    Ge, Jun
    Cheng, Guanghui
    Chen, Liwei
    NANOSCALE, 2011, 3 (08) : 3084 - 3088
  • [48] Thin-Film Morphology of Inkjet-Printed Single-Droplet Organic Transistors Using Polarized Raman Spectroscopy: Effect of Blending TIPS-Pentacene with Insulating Polymer
    James, David T.
    Kjellander, B. K. Charlotte
    Smaal, Wiljan T. T.
    Gelinck, Gerwin H.
    Combe, Craig
    McCulloch, Iain
    Wilson, Richard
    Burroughes, Jeremy H.
    Bradley, Donal D. C.
    Kim, Ji-Seon
    ACS NANO, 2011, 5 (12) : 9824 - 9835
  • [49] Inkjet-Printed Carbon Nanotube Electrodes Modified with Dimercaptosuccinic Acid-Capped Fe3O4 Nanoparticles on Reduced Graphene Oxide Nanosheets for Single-Drop Determination of Trifluoperazine
    Ognjanovic, Milos
    Stankovic, Dalibor M.
    Jovic, Milica
    Krstic, Milena P.
    Lesch, Andreas
    Girault, Hubert H.
    Antic, Bratislav, V
    ACS APPLIED NANO MATERIALS, 2020, 3 (05) : 4654 - 4662
  • [50] All Printed Edge-Triggered Register Using Single Walled Carbon Nanotube-Based Thin Film Transistor
    Noh, Jinsoo
    Jung, Minhun
    Jung, Kyunghwan
    Lee, Gwangyong
    Lim, Soyeon
    Kim, Daae
    Subramanian, Vivek
    Cho, Gyoujin
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2012, 12 (05) : 4261 - 4264
12345