On the railhead material damage of insulated rail joints: Is it by ratchetting or alternating plasticity?

被引：5

作者：

Mandal, Nirmal Kumar ^{[1
]}

Spiryagin, Maksym ^{[1
]}

Berg, Mats ^{[2
]}

Stichel, Sebastian ^{[2
]}

机构：

[1] Cent Queensland Univ, Ctr Railway Engn, Rockhampton, Qld 4702, Australia

[2] KTH Royal Inst Technol, Sch Engn Sci, Dept Aeronaut & Vehicle Engn, SE-10044 Stockholm, Sweden

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2019年 / 128卷

关键词：

FEA; Wheel/rail contact; Rail Joints; Fatigue damage; Endpost materials; CONTACT; FAILURE; WHEEL; BEHAVIOR; MODEL;

D O I：

10.1016/j.ijfatigue.2019.105197

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Railhead becomes severely stressed due to localised contact loadings. This is more critical in the vicinity of endposts of an insulated rail joint. Popular IRJ endpost materials are fibreglass (fb), polytetrafluoroethylene (ptfe) and nylon66 (ny). A 3D finite element analysis is carried out to study stress distributions in railhead material near the endposts. The progressive damage parameter, von Mises stress and other residual stress and strain plots indicate that plastic deformation and material degradation occur at sub-surface levels of the railhead material. Although fb and ptfe are better endpost materials than ny, ny displays superior performance over the other two.

引用

页数：12

共 50 条

[31] Monitoring of Insulated Rail Joints Based on Gap Value Measurement
Aldo La Placa
Francesco Freddi
Felice Giuliani
Urban Rail Transit, 2024, 10 : 28 - 41
[32] Study on the Initiation of Fatigue Cracks Due to Wheel-Rail Impact at Insulated Rail Joints
Wei, Zilong
Liu, Xiubo
Zhou, Yu
Jia, Xinyu
Li, Guoqing
ADVANCES IN DYNAMICS OF VEHICLES ON ROADS AND TRACKS, IAVSD 2019, 2020, : 744 - 753
[33] Vibration characteristics of track at insulated rail joints of heavy haul railway
Liu G.
Xiao H.
Yang S.
Zhang Z.
Xiao, Hong, 2021, Chinese Vibration Engineering Society (40): : 71 - 79
[34] On the low cycle fatigue failure of insulated rail joints (IRJs']Js)
Mandal, Nirmal Kumar
ENGINEERING FAILURE ANALYSIS, 2014, 40 : 58 - 74
[35] A three dimensional finite element analysis of insulated rail joints deterioration
El-sayed, H. M.
Lotfy, M.
Zohny, H. N. El-din
Riad, H. S.
ENGINEERING FAILURE ANALYSIS, 2018, 91 : 201 - 215
[36] Sleeper embedded insulated rail joints for minimising the number of modes of failure
Zong, Nannan
Dhanasekar, Manicka
ENGINEERING FAILURE ANALYSIS, 2017, 76 : 27 - 43
[37] Characterizing and Inspecting for Progressive Epoxy Debonding in Bonded Insulated Rail Joints
Peltier, Daniel C.
Barkan, Christopher P. L.
TRANSPORTATION RESEARCH RECORD, 2009, (2117) : 85 - 92
[38] Analysis and tests of bonded insulated rail joints subjected to vertical wheel loads
Kerr, AD
Cox, JE
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1999, 41 (10) : 1253 - 1272
[39] Performance of square and inclined insulated rail joints based on field strain measurements
Dhanasekar, M.
Bayissa, W.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2012, 226 (F2) : 140 - 154
[40] Residual stresses in rail-ends from the in-service insulated rail joints using neutron diffraction
Luzin, Vladimir
Rathod, Chandrahas
Wexler, David
Boyd, Paul
Dhanasekar, Manicka
INTERNATIONAL CONFERENCE ON RESIDUAL STRESSES 9 (ICRS 9), 2014, 768-769 : 741 - +

← 1 2 3 4 5 →