Experimental study on thermal performance of micro pin fin heat sinks with various shapes

被引:46
|
作者
Hua, Junye [1 ]
Li, Gui [2 ]
Zhao, Xiaobao [1 ]
Li, Qihe [1 ]
机构
[1] Nanjing Normal Univ, Sch Energy & Mech Engn, Engn Lab Energy Syst Proc Convers & Emiss Reduct, Nanjing 210042, Jiangsu, Peoples R China
[2] Jiangsu Geol Geothermal Energy CO LTD, Nanjing 211100, Jiangsu, Peoples R China
关键词
FRICTION FACTOR; FLOW;
D O I
10.1007/s00231-016-1880-8
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper presents a visualization experimental study on the heat transfer characteristics of various shapes of micro pin fins, including the circular, ellipse, diamond, square and triangle shape micro pin fin arrays with various equivalent diameters and pin fin density. The influences study of different sizes and shapes of pin fin on Nusselt number and heat transfer coefficient have been conducted. The results show that with the increase of the flow rate, the temperature of the bottom of the experimental section decreases. And the Nusselt number of different shapes of micro pin fins increases with the increase of Re. In which, the heat transfer performance of the ellipse shape pin fin appears better among the other shapes of pin fins. However, the higher pin fin of the ellipse shape density leads to a weaker flow performance. Besides, the micro-scale heat transfer correlation between the Nusselt number and the Reynolds number is fitted based on the experimental data.
引用
收藏
页码:1093 / 1104
页数:12
相关论文
共 50 条
  • [31] Study on the flow resistance performance of fluid cross various shapes of micro-scale pin fin
    Hua, Junye
    Li, Gui
    Zhao, Xiaobao
    Li, Qihe
    Hu, Jiao
    APPLIED THERMAL ENGINEERING, 2016, 107 : 768 - 775
  • [32] Thermal management of electronics: An experimental analysis of triangular, rectangular and circular pin-fin heat sinks for various PCMs
    Ali, Hafiz Muhammad
    Ashraf, Muhammad Junaid
    Giovannelli, Ambra
    Irfan, Muhammad
    Bin Irshad, Talal
    Hamid, Hafiz Muhammad
    Hassan, Faisal
    Arshad, Adeel
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 123 : 272 - 284
  • [33] Comparison of the parallel microchannel and Pin-Fin heat Sinks: An experimental study
    Pandey J.
    Husain A.
    Zahid Ansari M.
    Al-Azri N.
    Materials Today: Proceedings, 2022, 56 : 845 - 850
  • [34] The thermal resistance of pin fin heat sinks in transverse flow
    Kang, S
    Holahan, M
    ADVANCES IN ELECTRONIC PACKAGING 2003, VOL 2, 2003, : 237 - 244
  • [35] Experimental and numerical study of micro-pin-fin heat sinks with variable density for increased temperature uniformity
    Vilarrubi, Montse
    Riera, Sara
    Ibanez, Manel
    Omri, Mohamed
    Laguna, Gerard
    Frechette, Luc
    Barrau, Jerome
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2018, 132 : 424 - 434
  • [36] Comparison of thermal-hydraulic performance of singe-phase micro-pin-fin and micro-channel heat sinks
    Qu, Weilin
    2008 11TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS, VOLS 1-3, 2008, : 105 - 112
  • [37] A study on polymer pin fin based heat sinks
    Ansari, Ajmal
    IPACK 2007: PROCEEDINGS OF THE ASME INTERPACK CONFERENCE 2007, VOL 1, 2007, : 637 - 642
  • [38] A comparative study of the airside performance of heat sinks having pin fin configurations
    Yang, Kai-Shing
    Chu, Wei-Hsin
    Chen, Ing-Yong
    Wang, Chi-Chuan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (23-24) : 4661 - 4667
  • [39] Modeling of the thermal and hydraulic performance of plate fin, strip fin, and pin fin heat sinks - Influence of flow bypass
    Jonsson, H
    Moshfegh, B
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2001, 24 (02): : 142 - 149
  • [40] Cross flow boiling in micro-pin fin heat sinks
    Krishnamurthy, Santosh
    Peles, Yoav
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 8, PTS A AND B: HEAT TRANSFER, FLUID FLOWS, AND THERMAL SYSTEMS, 2008, : 1055 - 1061