Failure analysis of (±55°)3 filament wound composite pipes with an inclined surface crack under static internal pressure

被引：50

作者：

Arikan, Huseyin ^{[1
]}

机构：

[1] Selcuk Univ, Seydisehir Tech Coll, Seydisehir, Konya, Turkey

来源：

COMPOSITE STRUCTURES | 2010年 / 92卷 / 01期

关键词：

GRP pipe; Inclined surface crack; Burst strength; Internal pressure; FATIGUE BEHAVIOR; GRP PIPES;

D O I：

10.1016/j.compstruct.2009.07.027

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This study conducts failure analysis of filament wound glass reinforced plastic (GRP) pipes made of E-glass/epoxy with an inclined surface crack under open-ended internal pressure. Test specimens are composed of six antisymmetric layers with (+/- 55 degrees)(3) winding angles. Tests have been performed at seven different crack angles: 0 degrees, 15 degrees, 30 degrees, 60 degrees, 45 degrees, 75 degrees, and 90 degrees, with crack-to-thickness ratio of a/t = 0.50. The burst strengths of the specimens were determined, and the dependence of the burst strength on the crack angle was examined. Published by Elsevier Ltd.

引用

页码：182 / 187

页数：6

共 50 条

[21] Failure of ±55 degree filament wound glass/epoxy composite tubes under biaxial compression
Kaddour, AS
Soden, PD
Hinton, MJ
JOURNAL OF COMPOSITE MATERIALS, 1998, 32 (18) : 1618 - 1645
[22] Short-term test of ±55° filament wound GRE composite pipes under multiaxial stress ratios
Krishnan, Pranesh
Majid, M. S. Abdul
Afendi, M.
Marzuki, H. F.
Kazim, M. N. F. Mohd
MECHANICAL AND MATERIALS ENGINEERING, 2014, 554 : 371 - +
[23] Dynamic analysis of multi-layered filament-wound composite pipes subjected to cyclic internal pressure and cyclic temperature
Ansari, R.
Alisafaei, F.
Ghaedi, P.
COMPOSITE STRUCTURES, 2010, 92 (05) : 1100 - 1109
[24] Experimental and numerical investigation of adhesively bonded ± 55° filament wound tubular specimens under internal pressure
Braiek, Sonia
Ben Khalifa, Ated
Zitoune, Redouane
Zidi, Mondher
ENGINEERING FRACTURE MECHANICS, 2018, 199 : 461 - 475
[25] Failure analysis of cracked pipes repaired by composites under internal pressure
Qiu J.
Chen R.
Liu B.
Ren G.
Guofang Keji Daxue Xuebao/Journal of National University of Defense Technology, 2019, 41 (05): : 62 - 70
[26] Numerical analysis of the deformation behavior of filament wound composite shell subjected to internal pressure
Shao, ZS
Wang, TJ
PROGRESS IN EXPERIMENTAL AND COMPUTATIONAL MECHANICS IN ENGINEERING, 2003, 243-2 : 529 - 534
[27] FAILURE MECHANISMS DURING THE TRANSVERSE LOADING OF FILAMENT-WOUND PIPES UNDER STATIC AND LOW VELOCITY IMPACT CONDITIONS
ALDERSON, KL
EVANS, KE
COMPOSITES, 1992, 23 (03): : 167 - 173
[28] Progressive Failure Analysis of Adhesive Joints of Filament-Wound Composite Pressure Vessel
Kim, Junhwan
Shin, Kwangbok
Hwang, Taekyung
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2014, 38 (11) : 1265 - 1272
[29] Using J-integral analysis to predict the failure of HDPE pipes under crack face load and internal pressure
Gaidi, Laouni
Ouldyerou, Abdelhak
Aminallah, Laid
Merdji, Ali
Roy, Sandipan
Houari, Mohammed Sid Ahmed
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (12) : 5937 - 5944
[30] Multiparametric sensitivity analysis of multilayered filament-wound cylinder under internal pressure
Kang, Chao
Liu, Zan
Shirinzadeh, Bijan
Shi, Yaoyao
Yu, Tao
Zhao, Mengjun
Zhao, Pan
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2022, 29 (08) : 1172 - 1183

← 1 2 3 4 5 →