Determination of crack initiation direction from a bi-material notch based on the strain energy density concept

被引：20

作者：

Klusak, J. ^{[1
]}

Knesl, Z. ^{[1
]}

机构：

[1] Acad Sci Czech Republic, Inst Phys Mat, Brno 61662, Czech Republic

来源：

COMPUTATIONAL MATERIALS SCIENCE | 2007年 / 39卷 / 01期

关键词：

bi-material notch; crack initiation direction; strain energy density;

D O I：

10.1016/j.commatsci.2006.02.021

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The article presents a procedure for the determination of the direction of crack initiation from a bi-material notch. The approach is based on the knowledge of the strain energy density distribution. First, the strain energy density for a bi-material notch is expressed and then the directions of the crack initiation are evaluated. It is shown that for estimation of the crack initiation direction two existing singular terms have to be taken into account. The results are presented for a specific notch geometry for the varying ratio of Young's moduli E-1/E-2 of both materials and the varying ratio of generalized stress intensity factors H-2/H-1. (c) 2006 Elsevier B.V. All rights reserved.

引用

页码：214 / 218

页数：5

共 50 条

[41] Numerical Evaluation of Energy Release Rate for Several Crack Orientation and Position to the Bi-Material Interface Plates
Tani, N. Kazi
Tamine, T.
Pluvinage, G.
DAMAGE AND FRACTURE MECHANICS: FAILURE ANALYSIS OF ENGINEERING MATERIALS AND STRUCTURES, 2009, : 445 - +
[42] Crack initiation behaviour of orthotropic solids as predicted by the strain energy density theory
Carloni, C
Nobile, L
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2002, 38 (02) : 109 - 119
[43] Probabilistic Fatigue Crack Initiation and Propagation Fields Using the Strain Energy Density
Correia, J. A. F. O.
Huffman, P. J.
De Jesus, A. M. P.
Lesiuk, G.
Castro, J. M.
Calcada, R. A. B.
Bertod, F.
STRENGTH OF MATERIALS, 2018, 50 (04) : 620 - 635
[44] Probabilistic Fatigue Crack Initiation and Propagation Fields Using the Strain Energy Density
J. A. F. O. Correia
P. J. Huffman
A. M. P. De Jesus
G. Lesiuk
J. M. Castro
R. A. B. Calcada
F. Bertod
Strength of Materials, 2018, 50 : 620 - 635
[45] Energy release rates of bi-material interface crack including residual thermal stresses: Application of crack tip element method
Yokozeki, Tomohiro
ENGINEERING FRACTURE MECHANICS, 2010, 77 (01) : 84 - 93
[46] A strain energy based damage model for fatigue crack initiation and growth
Huffman, P. J.
INTERNATIONAL JOURNAL OF FATIGUE, 2016, 88 : 197 - 204
[47] Prediction of delamination in a bi-material system based on free-edge energy evaluation
Fan, HB
Yuen, MMF
Suhir, E
53RD ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, 2003 PROCEEDINGS, 2003, : 1160 - 1164
[48] ON THE APPLICATION OF THE STRAIN-ENERGY DENSITY THEORY IN PREDICTING CRACK INITIATION AND ANGLE OF GROWTH
WONG, AK
ENGINEERING FRACTURE MECHANICS, 1987, 27 (02) : 157 - 170
[49] A Successful Combination of the Equivalent Material Concept and the Averaged Strain Energy Density Criterion for Predicting Crack Initiation from Blunt V-Notches in Ductile Aluminum Plates under Mixed Mode Loading
Torabi, A. R.
Campagnolo, A.
Berto, F.
PHYSICAL MESOMECHANICS, 2016, 19 (04) : 382 - 391
[50] A successful combination of the equivalent material concept and the averaged strain energy density criterion for predicting crack initiation from blunt V-notches in ductile aluminum plates under mixed mode loading
A. R. Torabi
A. Campagnolo
F. Berto
Physical Mesomechanics, 2016, 19 : 382 - 391

← 1 2 3 4 5 →