New approach to determine uniaxial creep properties from small punch creep curves

被引：4

作者：

Dymacek, Petr ^{[1
,2
]}

Li, Yingzhi ^{[3
]}

Dobes, Ferdinand ^{[1
]}

Stevens, Paul ^{[4
]}

机构：

[1] Acad Sci Czech Republ, Inst Phys Mat, Zizkova 22, Brno 61662, Czech Republic

[2] Acad Sci Czech Republ, Inst Phys Mat, CEITEC IPM, Brno, Czech Republic

[3] Mat & Inspect Dept, Utrecht, Netherlands

[4] DEKRA, Mat Testing & Inspect, Utrecht, Netherlands

来源：

MATERIALS AT HIGH TEMPERATURES | 2019年 / 36卷 / 02期

关键词：

Small punch; uniaxial creep; equivalent stress; heat resistant steels; CR FERRITIC STEEL; DEFORMATION; DEFLECTION; BEHAVIOR; STRAIN; LIFE;

D O I：

10.1080/09603409.2018.1495876

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A key issue in the small punch creep test (SPC) is to determine the equivalent stress that results in the same time to rupture in a uniaxial creep test (UAC). A new approach is proposed based on formulas between the ratio of force in SPC to stress in UAC and the deflection at the minimum deflection rate. Another formula is defined between the minimum deflection rate and the minimum strain rate. In both cases, they were created from a large experimental data pool of high temperature creep-resistant steels. The predicted Norton law and the rupture time dependence on stress are in good agreement with the experimental UAC results. In all cases, the predictions using the present approach are much better than those based on Chakrabarty membrane stretch model.

引用

页码：157 / 164

页数：8

共 50 条

[11] Determining Norton creep properties from small punch creep tests by using the representative stress-strain method and inverse approach
Xie, Li
Yu, Feng
Sun, Mingcheng
Li, Yingzhi
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2025, 137
[12] Determination of creep damage properties from small punch creep tests considering pre-straining effect using an inverse approach
Wen Wu
Jin Xiaozhe
Liu Hao
Sun Wei
MECHANICS OF MATERIALS, 2019, 139
[13] Evaluation of creep properties of reduced activation ferritic steels by small punch creep test
Nakata, T
Komazaki, SI
Kohno, Y
Shiba, K
Kohyama, A
Hashida, T
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2006, 70 (02) : 130 - 133
[14] Creep Properties Assessment of P92 Steel by Small Punch Creep Tests
Deshmukh, G. S.
Prasad, M. L.
Peshwe, D. R.
Kumar, J. Ganesh
Mathew, M. D.
Amarendra, G.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (04) : 907 - 915
[15] Creep Properties Assessment of P92 Steel by Small Punch Creep Tests
G. S. Deshmukh
M. L. Prasad
D. R. Peshwe
J. Ganesh Kumar
M. D. Mathew
G. Amarendra
Transactions of the Indian Institute of Metals, 2016, 69 : 907 - 915
[16] Application of the Small Punch Creep Test in Predicting Creep Properties of Grade 91 Steel
Ul Ferdous, Imam
Alang, Nasrul Azuan
Alias, Juliawati
Ab. Razak, Norhaida
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
[17] Determination of creep properties of a P91 weldment by small punch testing and a new evaluation approach
Gulcimen, B.
Hahner, P.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 : 125 - 131
[18] New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures
Matschkal-Amberger, D.
Kolb, M.
Neumeier, S.
Gao, S.
Hartmaier, A.
Durst, K.
Goeken, M.
MATERIALS & DESIGN, 2019, 183
[19] Small Punch Creep properties of aged boiler tube used in thermal power stations, and relationship between those and uniaxial creep test results
1600, Japan Society of Mechanical Engineers (79):
[20] Application of creep small punch testing in assessment of creep lifetime
Dobes, F.
Milicka, K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 510-11 : 440 - 443

← 1 2 3 4 5 →